ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x

Memory access must be blocked before hardware reset is asserted and before
power is gated, otherwise a serious hardware fault is inevitable. Add
reset for memory clients to the GR2D, GR3D and Host1x nodes.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 83095a4..b016088 100644 (file)
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -123,8 +123,8 @@
                interrupt-names = "syncpt", "host1x";
                clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
                clock-names = "host1x";
-               resets = <&tegra_car 28>;
-               reset-names = "host1x";
+               resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+               reset-names = "host1x", "mc";
                iommus = <&mc TEGRA_SWGROUP_HC>;
                power-domains = <&pd_heg>;
                operating-points-v2 = <&host1x_dvfs_opp_table>;
@@ -190,8 +190,8 @@
                        reg = <0x54140000 0x00040000>;
                        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-                       resets = <&tegra_car 21>;
-                       reset-names = "2d";
+                       resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+                       reset-names = "2d", "mc";
                        power-domains = <&pd_heg>;
                        operating-points-v2 = <&gr2d_dvfs_opp_table>;
 
@@ -205,8 +205,10 @@
                                 <&tegra_car TEGRA30_CLK_GR3D2>;
                        clock-names = "3d", "3d2";
                        resets = <&tegra_car 24>,
-                                <&tegra_car 98>;
-                       reset-names = "3d", "3d2";
+                                <&tegra_car 98>,
+                                <&mc TEGRA30_MC_RESET_3D>,
+                                <&mc TEGRA30_MC_RESET_3D2>;
+                       reset-names = "3d", "3d2", "mc", "mc2";
                        power-domains = <&pd_3d0>, <&pd_3d1>;
                        power-domain-names = "3d0", "3d1";
                        operating-points-v2 = <&gr3d_dvfs_opp_table>;