The display IPs in MediaTek SoCs support being interconnected with
different instances of DDP IPs (for example, merge0 or merge1) and/or
with different DDP IPs (for example, rdma can be connected with either
color, dpi, dsi, merge, etc), forming a full Display Data Path that
ends with an actual display.
The final display pipeline is effectively board specific, as it does
depend on the display that is attached to it, and eventually on the
sensors supported by the board (for example, Adaptive Ambient Light
would need an Ambient Light Sensor, otherwise it's pointless!), other
than the output type.
Add support for OF graphs to most of the MediaTek DDP (display) bindings
to add flexibility to build custom hardware paths, hence enabling board
specific configuration of the display pipeline and allowing to finally
migrate away from using hardcoded paths.
Please note that - while this commit retains retro-compatibility with
old device trees - it will break the ABI for mediatek,dsi and for
mediatek,dpi for the sake of consistency between the `ports` in all
MediaTek DRM drivers versus DRM bridge drivers as in the previous
binding, MediaTek was using `port` (implicitly, port@0) as an OUTPUT,
while now the first port is an INPUT, and the second one is an OUTPUT,
which is consistent with other DRM drivers which can be chained to
drm/mediatek.
As for maintainability concerns, I am aware that the old device tree
will not be actively tested anymore, but retrocompatibility breakages
will *not* be more likely to happen in the future because any addition
to the graph (new drivers) will be done only for features present on
newer SoCs, keeping the old ones (and their default pipeline) untouched.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Michael Walle <mwalle@kernel.org> # on kontron-sbc-i1200
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241017103809.156056-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: AAL input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ AAL output to the next component's input, for example could be one
+ of many gamma, overdrive or other blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ aal0_in: endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ aal0_out: endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
};
};
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CCORR input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ CCORR output to the input of the next desired component in the
+ display pipeline, usually only one of the available AAL blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: COLOR input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ COLOR output to the input of the next desired component in the
+ display pipeline, for example one of the available CCORR or AAL
+ blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DITHER input, usually from a POSTMASK or GAMMA block.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DITHER output to the input of the next desired component in the
+ display pipeline, for example one of the available DSC compressors,
+ DP_INTF, DSI, LVDS or others.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
Output port node. This port should be connected to the input port of an
attached HDMI, LVDS or DisplayPort encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI output to an HDMI, LVDS or DisplayPort encoder input
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
allOf:
- if:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
- dpi0: dpi@1401d000 {
+ dpi: dpi@1401d000 {
compatible = "mediatek,mt8173-dpi";
reg = <0x1401d000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression input, usually from one of the DITHER
+ or MERGE blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression output to the input of the next desired
+ component in the display pipeline, for example to MERGE, DP_INTF,
+ DPI or DSI.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
Output port node. This port should be connected to the input
port of an attached DSI panel or DSI-to-eDP encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input ports can have multiple endpoints, each of those connects
+ to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI input port, usually from DITHER, DSC or MERGE
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI output to an attached DSI panel, or a DSI-to-X encoder chip
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
- clock-names
- phys
- phy-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
unevaluatedProperties: false
include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
function block.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: ETHDR input, usually from one of the MERGE blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ ETHDR output to the input of the next desired component in the
+ display pipeline, for example one of the available MERGE blocks,
+ or others.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GAMMA input, usually from one of the AAL blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ GAMMA output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER or
+ POSTMASK blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA,
+ ETHDR or even from a different MERGE block
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or
+ a different MERGE block, or others.
+
+ required:
+ - port@0
+ - port@1
+
resets:
description: reset controller
See Documentation/devicetree/bindings/reset/reset.txt for details.
items:
- description: OD Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OD input port, usually from an AAL block
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OD output to the input of the next desired component in the
+ display pipeline, for example one of the available RDMA or
+ other blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS, VDOSYS or other OVLs
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS or one of multiple VDOSYS
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: POSTMASK input port, usually from GAMMA
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ POSTMASK output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: RDMA input port, usually from MMSYS, OD or OVL
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ RDMA output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, DPI,
+ DSI, MERGE or UFOE blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
items:
- description: UFOe Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: UFOE input, usually from one of the RDMA blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ UFOE output to the input of the next desired component in the
+ display pipeline, usually one of the available DSI blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
projects / linux-2.6-microblaze.git / commitdiff