--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __IWL_CONFIG_H__
+#define __IWL_CONFIG_H__
+
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+struct iwl_priv;
+struct iwl_lib_ops;
+
+
+/*
+ * LED mode
+ * IWL_LED_DEFAULT: use device default
+ * IWL_LED_RF_STATE: turn LED on/off based on RF state
+ * LED ON = RF ON
+ * LED OFF = RF OFF
+ * IWL_LED_BLINK: adjust led blink rate based on blink table
+ * IWL_LED_DISABLE: led disabled
+ */
+enum iwl_led_mode {
+ IWL_LED_DEFAULT,
+ IWL_LED_RF_STATE,
+ IWL_LED_BLINK,
+ IWL_LED_DISABLE,
+};
+
+/*
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ * to the deviation to achieve the desired led frequency.
+ * The detail algorithm is described in iwl-led.c
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ * radio tuning when there is a high receiving plcp error rate
+ * @chain_noise_scale: default chain noise scale used for gain computation
+ * @wd_timeout: TX queues watchdog timeout
+ * @max_event_log_size: size of event log buffer size for ucode event logging
+ * @shadow_reg_enable: HW shadhow register bit
+ * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * @no_idle_support: do not support idle mode
+ */
+struct iwl_base_params {
+ int eeprom_size;
+ int num_of_queues; /* def: HW dependent */
+ /* for iwl_apm_init() */
+ u32 pll_cfg_val;
+
+ const u16 max_ll_items;
+ const bool shadow_ram_support;
+ u16 led_compensation;
+ bool adv_thermal_throttle;
+ bool support_ct_kill_exit;
+ u8 plcp_delta_threshold;
+ s32 chain_noise_scale;
+ unsigned int wd_timeout;
+ u32 max_event_log_size;
+ const bool shadow_reg_enable;
+ const bool hd_v2;
+ const bool no_idle_support;
+};
+
+/*
+ * @advanced_bt_coexist: support advanced bt coexist
+ * @bt_init_traffic_load: specify initial bt traffic load
+ * @bt_prio_boost: default bt priority boost value
+ * @agg_time_limit: maximum number of uSec in aggregation
+ * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
+ */
+struct iwl_bt_params {
+ bool advanced_bt_coexist;
+ u8 bt_init_traffic_load;
+ u8 bt_prio_boost;
+ u16 agg_time_limit;
+ bool bt_sco_disable;
+ bool bt_session_2;
+};
+/*
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ */
+struct iwl_ht_params {
+ const bool ht_greenfield_support; /* if used set to true */
+ bool use_rts_for_aggregation;
+ enum ieee80211_smps_mode smps_mode;
+};
+
+/**
+ * struct iwl_cfg
+ * @name: Offical name of the device
+ * @fw_name_pre: Firmware filename prefix. The api version and extension
+ * (.ucode) will be added to filename before loading from disk. The
+ * filename is constructed as fw_name_pre<api>.ucode.
+ * @ucode_api_max: Highest version of uCode API supported by driver.
+ * @ucode_api_ok: oldest version of the uCode API that is OK to load
+ * without a warning, for use in transitions
+ * @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @max_inst_size: The maximal length of the fw inst section
+ * @max_data_size: The maximal length of the fw data section
+ * @valid_tx_ant: valid transmit antenna
+ * @valid_rx_ant: valid receive antenna
+ * @eeprom_ver: EEPROM version
+ * @eeprom_calib_ver: EEPROM calibration version
+ * @lib: pointer to the lib ops
+ * @additional_nic_config: additional nic configuration
+ * @base_params: pointer to basic parameters
+ * @ht_params: point to ht patameters
+ * @bt_params: pointer to bt parameters
+ * @need_temp_offset_calib: need to perform temperature offset calibration
+ * @no_xtal_calib: some devices do not need crystal calibration data,
+ * don't send it to those
+ * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
+ * @adv_pm: advance power management
+ * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @internal_wimax_coex: internal wifi/wimax combo device
+ * @temp_offset_v2: support v2 of temperature offset calibration
+ *
+ * We enable the driver to be backward compatible wrt. hardware features.
+ * API differences in uCode shouldn't be handled here but through TLVs
+ * and/or the uCode API version instead.
+ */
+struct iwl_cfg {
+ /* params specific to an individual device within a device family */
+ const char *name;
+ const char *fw_name_pre;
+ const unsigned int ucode_api_max;
+ const unsigned int ucode_api_ok;
+ const unsigned int ucode_api_min;
+ const u32 max_data_size;
+ const u32 max_inst_size;
+ u8 valid_tx_ant;
+ u8 valid_rx_ant;
+ u16 eeprom_ver;
+ u16 eeprom_calib_ver;
+ const struct iwl_lib_ops *lib;
+ void (*additional_nic_config)(struct iwl_priv *priv);
+ /* params not likely to change within a device family */
+ const struct iwl_base_params *base_params;
+ /* params likely to change within a device family */
+ const struct iwl_ht_params *ht_params;
+ const struct iwl_bt_params *bt_params;
+ const bool need_temp_offset_calib; /* if used set to true */
+ const bool no_xtal_calib;
+ enum iwl_led_mode led_mode;
+ const bool adv_pm;
+ const bool rx_with_siso_diversity;
+ const bool internal_wimax_coex;
+ const bool temp_offset_v2;
+};
+
+#endif /* __IWL_CONFIG_H__ */
#include "iwl-commands.h"
#include "iwl-fw.h"
+#include "iwl-config.h"
/**
* DOC: shared area - role and goal
struct iwl_priv;
struct iwl_trans;
-struct iwl_sensitivity_ranges;
struct iwl_trans_ops;
#define DRV_NAME "iwlwifi"
bool auto_agg;
};
-/*
- * LED mode
- * IWL_LED_DEFAULT: use device default
- * IWL_LED_RF_STATE: turn LED on/off based on RF state
- * LED ON = RF ON
- * LED OFF = RF OFF
- * IWL_LED_BLINK: adjust led blink rate based on blink table
- * IWL_LED_DISABLE: led disabled
- */
-enum iwl_led_mode {
- IWL_LED_DEFAULT,
- IWL_LED_RF_STATE,
- IWL_LED_BLINK,
- IWL_LED_DISABLE,
-};
-
-/*
- * @max_ll_items: max number of OTP blocks
- * @shadow_ram_support: shadow support for OTP memory
- * @led_compensation: compensate on the led on/off time per HW according
- * to the deviation to achieve the desired led frequency.
- * The detail algorithm is described in iwl-led.c
- * @chain_noise_num_beacons: number of beacons used to compute chain noise
- * @adv_thermal_throttle: support advance thermal throttle
- * @support_ct_kill_exit: support ct kill exit condition
- * @plcp_delta_threshold: plcp error rate threshold used to trigger
- * radio tuning when there is a high receiving plcp error rate
- * @chain_noise_scale: default chain noise scale used for gain computation
- * @wd_timeout: TX queues watchdog timeout
- * @max_event_log_size: size of event log buffer size for ucode event logging
- * @shadow_reg_enable: HW shadhow register bit
- * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
- * @no_idle_support: do not support idle mode
- */
-struct iwl_base_params {
- int eeprom_size;
- int num_of_queues; /* def: HW dependent */
- /* for iwl_apm_init() */
- u32 pll_cfg_val;
-
- const u16 max_ll_items;
- const bool shadow_ram_support;
- u16 led_compensation;
- bool adv_thermal_throttle;
- bool support_ct_kill_exit;
- u8 plcp_delta_threshold;
- s32 chain_noise_scale;
- unsigned int wd_timeout;
- u32 max_event_log_size;
- const bool shadow_reg_enable;
- const bool hd_v2;
- const bool no_idle_support;
-};
-
-/*
- * @advanced_bt_coexist: support advanced bt coexist
- * @bt_init_traffic_load: specify initial bt traffic load
- * @bt_prio_boost: default bt priority boost value
- * @agg_time_limit: maximum number of uSec in aggregation
- * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
- */
-struct iwl_bt_params {
- bool advanced_bt_coexist;
- u8 bt_init_traffic_load;
- u8 bt_prio_boost;
- u16 agg_time_limit;
- bool bt_sco_disable;
- bool bt_session_2;
-};
-/*
- * @use_rts_for_aggregation: use rts/cts protection for HT traffic
- */
-struct iwl_ht_params {
- const bool ht_greenfield_support; /* if used set to true */
- bool use_rts_for_aggregation;
- enum ieee80211_smps_mode smps_mode;
-};
-
-/**
- * struct iwl_cfg
- * @name: Offical name of the device
- * @fw_name_pre: Firmware filename prefix. The api version and extension
- * (.ucode) will be added to filename before loading from disk. The
- * filename is constructed as fw_name_pre<api>.ucode.
- * @ucode_api_max: Highest version of uCode API supported by driver.
- * @ucode_api_ok: oldest version of the uCode API that is OK to load
- * without a warning, for use in transitions
- * @ucode_api_min: Lowest version of uCode API supported by driver.
- * @max_inst_size: The maximal length of the fw inst section
- * @max_data_size: The maximal length of the fw data section
- * @valid_tx_ant: valid transmit antenna
- * @valid_rx_ant: valid receive antenna
- * @eeprom_ver: EEPROM version
- * @eeprom_calib_ver: EEPROM calibration version
- * @lib: pointer to the lib ops
- * @additional_nic_config: additional nic configuration
- * @base_params: pointer to basic parameters
- * @ht_params: point to ht patameters
- * @bt_params: pointer to bt parameters
- * @need_temp_offset_calib: need to perform temperature offset calibration
- * @no_xtal_calib: some devices do not need crystal calibration data,
- * don't send it to those
- * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
- * @adv_pm: advance power management
- * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
- * @internal_wimax_coex: internal wifi/wimax combo device
- * @temp_offset_v2: support v2 of temperature offset calibration
- *
- * We enable the driver to be backward compatible wrt. hardware features.
- * API differences in uCode shouldn't be handled here but through TLVs
- * and/or the uCode API version instead.
- */
-struct iwl_cfg {
- /* params specific to an individual device within a device family */
- const char *name;
- const char *fw_name_pre;
- const unsigned int ucode_api_max;
- const unsigned int ucode_api_ok;
- const unsigned int ucode_api_min;
- const u32 max_data_size;
- const u32 max_inst_size;
- u8 valid_tx_ant;
- u8 valid_rx_ant;
- u16 eeprom_ver;
- u16 eeprom_calib_ver;
- const struct iwl_lib_ops *lib;
- void (*additional_nic_config)(struct iwl_priv *priv);
- /* params not likely to change within a device family */
- const struct iwl_base_params *base_params;
- /* params likely to change within a device family */
- const struct iwl_ht_params *ht_params;
- const struct iwl_bt_params *bt_params;
- const bool need_temp_offset_calib; /* if used set to true */
- const bool no_xtal_calib;
- enum iwl_led_mode led_mode;
- const bool adv_pm;
- const bool rx_with_siso_diversity;
- const bool internal_wimax_coex;
- const bool temp_offset_v2;
-};
-
/**
* struct iwl_shared - shared fields for all the layers of the driver
*
projects / linux-2.6-microblaze.git / commitdiff