Display Stream Compression Helper Functions Reference
=====================================================
-.. kernel-doc:: drivers/gpu/drm/drm_dsc.c
+.. kernel-doc:: drivers/gpu/drm/display/drm_dsc_helper.c
:doc: dsc helpers
-.. kernel-doc:: include/drm/drm_dsc.h
+.. kernel-doc:: include/drm/display/drm_dsc.h
:internal:
-.. kernel-doc:: drivers/gpu/drm/drm_dsc.c
+.. kernel-doc:: drivers/gpu/drm/display/drm_dsc_helper.c
:export:
Output Probing Helper Functions Reference
#
drm_kms_helper-y := drm_bridge_connector.o drm_crtc_helper.o \
- drm_dsc.o drm_encoder_slave.o drm_flip_work.o drm_hdcp.o \
+ drm_encoder_slave.o drm_flip_work.o drm_hdcp.o \
drm_probe_helper.o \
drm_plane_helper.o drm_atomic_helper.o \
drm_kms_helper_common.o \
*
*/
+#include <drm/display/drm_dsc_helper.h>
+
#include "reg_helper.h"
#include "dcn20_dsc.h"
#include "dsc/dscc_types.h"
#include "dsc.h"
#include "dsc/dscc_types.h"
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc.h>
#define TO_DCN20_DSC(dsc)\
container_of(dsc, struct dcn20_dsc, base)
#define __RC_CALC_FPU_H__
#include "os_types.h"
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc.h>
#define QP_SET_SIZE 15
* Author: AMD
*/
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_dsc_helper.h>
#include "dc_hw_types.h"
#include "dsc.h"
-#include <drm/display/drm_dp_helper.h>
#include "dc.h"
#include "rc_calc.h"
#include "fixed31_32.h"
#ifndef __DSCC_TYPES_H__
#define __DSCC_TYPES_H__
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc.h>
#ifndef NUM_BUF_RANGES
#define NUM_BUF_RANGES 15
* Authors: AMD
*
*/
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
#include "dscc_types.h"
#include "rc_calc.h"
drm_display_helper-y := drm_display_helper_mod.o
drm_display_helper-$(CONFIG_DRM_DISPLAY_DP_HELPER) += drm_dp_dual_mode_helper.o \
drm_dp_helper.o \
- drm_dp_mst_topology.o
+ drm_dp_mst_topology.o \
+ drm_dsc_helper.o
drm_display_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
drm_display_helper-$(CONFIG_DRM_DP_CEC) += drm_dp_cec.o
--- /dev/null
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2018 Intel Corp
+ *
+ * Author:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/byteorder/generic.h>
+
+#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_dsc_helper.h>
+#include <drm/drm_print.h>
+
+/**
+ * DOC: dsc helpers
+ *
+ * VESA specification for DP 1.4 adds a new feature called Display Stream
+ * Compression (DSC) used to compress the pixel bits before sending it on
+ * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing
+ * display interfaces can support high resolutions at higher frames rates uisng
+ * the maximum available link capacity of these interfaces.
+ *
+ * These functions contain some common logic and helpers to deal with VESA
+ * Display Stream Compression standard required for DSC on Display Port/eDP or
+ * MIPI display interfaces.
+ */
+
+/**
+ * drm_dsc_dp_pps_header_init() - Initializes the PPS Header
+ * for DisplayPort as per the DP 1.4 spec.
+ * @pps_header: Secondary data packet header for DSC Picture
+ * Parameter Set as defined in &struct dp_sdp_header
+ *
+ * DP 1.4 spec defines the secondary data packet for sending the
+ * picture parameter infoframes from the source to the sink.
+ * This function populates the SDP header defined in
+ * &struct dp_sdp_header.
+ */
+void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header)
+{
+ memset(pps_header, 0, sizeof(*pps_header));
+
+ pps_header->HB1 = DP_SDP_PPS;
+ pps_header->HB2 = DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1;
+}
+EXPORT_SYMBOL(drm_dsc_dp_pps_header_init);
+
+/**
+ * drm_dsc_dp_rc_buffer_size - get rc buffer size in bytes
+ * @rc_buffer_block_size: block size code, according to DPCD offset 62h
+ * @rc_buffer_size: number of blocks - 1, according to DPCD offset 63h
+ *
+ * return:
+ * buffer size in bytes, or 0 on invalid input
+ */
+int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size)
+{
+ int size = 1024 * (rc_buffer_size + 1);
+
+ switch (rc_buffer_block_size) {
+ case DP_DSC_RC_BUF_BLK_SIZE_1:
+ return 1 * size;
+ case DP_DSC_RC_BUF_BLK_SIZE_4:
+ return 4 * size;
+ case DP_DSC_RC_BUF_BLK_SIZE_16:
+ return 16 * size;
+ case DP_DSC_RC_BUF_BLK_SIZE_64:
+ return 64 * size;
+ default:
+ return 0;
+ }
+}
+EXPORT_SYMBOL(drm_dsc_dp_rc_buffer_size);
+
+/**
+ * drm_dsc_pps_payload_pack() - Populates the DSC PPS
+ *
+ * @pps_payload:
+ * Bitwise struct for DSC Picture Parameter Set. This is defined
+ * by &struct drm_dsc_picture_parameter_set
+ * @dsc_cfg:
+ * DSC Configuration data filled by driver as defined by
+ * &struct drm_dsc_config
+ *
+ * DSC source device sends a picture parameter set (PPS) containing the
+ * information required by the sink to decode the compressed frame. Driver
+ * populates the DSC PPS struct using the DSC configuration parameters in
+ * the order expected by the DSC Display Sink device. For the DSC, the sink
+ * device expects the PPS payload in big endian format for fields
+ * that span more than 1 byte.
+ */
+void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload,
+ const struct drm_dsc_config *dsc_cfg)
+{
+ int i;
+
+ /* Protect against someone accidentally changing struct size */
+ BUILD_BUG_ON(sizeof(*pps_payload) !=
+ DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 + 1);
+
+ memset(pps_payload, 0, sizeof(*pps_payload));
+
+ /* PPS 0 */
+ pps_payload->dsc_version =
+ dsc_cfg->dsc_version_minor |
+ dsc_cfg->dsc_version_major << DSC_PPS_VERSION_MAJOR_SHIFT;
+
+ /* PPS 1, 2 is 0 */
+
+ /* PPS 3 */
+ pps_payload->pps_3 =
+ dsc_cfg->line_buf_depth |
+ dsc_cfg->bits_per_component << DSC_PPS_BPC_SHIFT;
+
+ /* PPS 4 */
+ pps_payload->pps_4 =
+ ((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >>
+ DSC_PPS_MSB_SHIFT) |
+ dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT |
+ dsc_cfg->simple_422 << DSC_PPS_SIMPLE422_SHIFT |
+ dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT |
+ dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT;
+
+ /* PPS 5 */
+ pps_payload->bits_per_pixel_low =
+ (dsc_cfg->bits_per_pixel & DSC_PPS_LSB_MASK);
+
+ /*
+ * The DSC panel expects the PPS packet to have big endian format
+ * for data spanning 2 bytes. Use a macro cpu_to_be16() to convert
+ * to big endian format. If format is little endian, it will swap
+ * bytes to convert to Big endian else keep it unchanged.
+ */
+
+ /* PPS 6, 7 */
+ pps_payload->pic_height = cpu_to_be16(dsc_cfg->pic_height);
+
+ /* PPS 8, 9 */
+ pps_payload->pic_width = cpu_to_be16(dsc_cfg->pic_width);
+
+ /* PPS 10, 11 */
+ pps_payload->slice_height = cpu_to_be16(dsc_cfg->slice_height);
+
+ /* PPS 12, 13 */
+ pps_payload->slice_width = cpu_to_be16(dsc_cfg->slice_width);
+
+ /* PPS 14, 15 */
+ pps_payload->chunk_size = cpu_to_be16(dsc_cfg->slice_chunk_size);
+
+ /* PPS 16 */
+ pps_payload->initial_xmit_delay_high =
+ ((dsc_cfg->initial_xmit_delay &
+ DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK) >>
+ DSC_PPS_MSB_SHIFT);
+
+ /* PPS 17 */
+ pps_payload->initial_xmit_delay_low =
+ (dsc_cfg->initial_xmit_delay & DSC_PPS_LSB_MASK);
+
+ /* PPS 18, 19 */
+ pps_payload->initial_dec_delay =
+ cpu_to_be16(dsc_cfg->initial_dec_delay);
+
+ /* PPS 20 is 0 */
+
+ /* PPS 21 */
+ pps_payload->initial_scale_value =
+ dsc_cfg->initial_scale_value;
+
+ /* PPS 22, 23 */
+ pps_payload->scale_increment_interval =
+ cpu_to_be16(dsc_cfg->scale_increment_interval);
+
+ /* PPS 24 */
+ pps_payload->scale_decrement_interval_high =
+ ((dsc_cfg->scale_decrement_interval &
+ DSC_PPS_SCALE_DEC_INT_HIGH_MASK) >>
+ DSC_PPS_MSB_SHIFT);
+
+ /* PPS 25 */
+ pps_payload->scale_decrement_interval_low =
+ (dsc_cfg->scale_decrement_interval & DSC_PPS_LSB_MASK);
+
+ /* PPS 26[7:0], PPS 27[7:5] RESERVED */
+
+ /* PPS 27 */
+ pps_payload->first_line_bpg_offset =
+ dsc_cfg->first_line_bpg_offset;
+
+ /* PPS 28, 29 */
+ pps_payload->nfl_bpg_offset =
+ cpu_to_be16(dsc_cfg->nfl_bpg_offset);
+
+ /* PPS 30, 31 */
+ pps_payload->slice_bpg_offset =
+ cpu_to_be16(dsc_cfg->slice_bpg_offset);
+
+ /* PPS 32, 33 */
+ pps_payload->initial_offset =
+ cpu_to_be16(dsc_cfg->initial_offset);
+
+ /* PPS 34, 35 */
+ pps_payload->final_offset = cpu_to_be16(dsc_cfg->final_offset);
+
+ /* PPS 36 */
+ pps_payload->flatness_min_qp = dsc_cfg->flatness_min_qp;
+
+ /* PPS 37 */
+ pps_payload->flatness_max_qp = dsc_cfg->flatness_max_qp;
+
+ /* PPS 38, 39 */
+ pps_payload->rc_model_size = cpu_to_be16(dsc_cfg->rc_model_size);
+
+ /* PPS 40 */
+ pps_payload->rc_edge_factor = DSC_RC_EDGE_FACTOR_CONST;
+
+ /* PPS 41 */
+ pps_payload->rc_quant_incr_limit0 =
+ dsc_cfg->rc_quant_incr_limit0;
+
+ /* PPS 42 */
+ pps_payload->rc_quant_incr_limit1 =
+ dsc_cfg->rc_quant_incr_limit1;
+
+ /* PPS 43 */
+ pps_payload->rc_tgt_offset = DSC_RC_TGT_OFFSET_LO_CONST |
+ DSC_RC_TGT_OFFSET_HI_CONST << DSC_PPS_RC_TGT_OFFSET_HI_SHIFT;
+
+ /* PPS 44 - 57 */
+ for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++)
+ pps_payload->rc_buf_thresh[i] =
+ dsc_cfg->rc_buf_thresh[i];
+
+ /* PPS 58 - 87 */
+ /*
+ * For DSC sink programming the RC Range parameter fields
+ * are as follows: Min_qp[15:11], max_qp[10:6], offset[5:0]
+ */
+ for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+ pps_payload->rc_range_parameters[i] =
+ cpu_to_be16((dsc_cfg->rc_range_params[i].range_min_qp <<
+ DSC_PPS_RC_RANGE_MINQP_SHIFT) |
+ (dsc_cfg->rc_range_params[i].range_max_qp <<
+ DSC_PPS_RC_RANGE_MAXQP_SHIFT) |
+ (dsc_cfg->rc_range_params[i].range_bpg_offset));
+ }
+
+ /* PPS 88 */
+ pps_payload->native_422_420 = dsc_cfg->native_422 |
+ dsc_cfg->native_420 << DSC_PPS_NATIVE_420_SHIFT;
+
+ /* PPS 89 */
+ pps_payload->second_line_bpg_offset =
+ dsc_cfg->second_line_bpg_offset;
+
+ /* PPS 90, 91 */
+ pps_payload->nsl_bpg_offset =
+ cpu_to_be16(dsc_cfg->nsl_bpg_offset);
+
+ /* PPS 92, 93 */
+ pps_payload->second_line_offset_adj =
+ cpu_to_be16(dsc_cfg->second_line_offset_adj);
+
+ /* PPS 94 - 127 are O */
+}
+EXPORT_SYMBOL(drm_dsc_pps_payload_pack);
+
+/**
+ * drm_dsc_compute_rc_parameters() - Write rate control
+ * parameters to the dsc configuration defined in
+ * &struct drm_dsc_config in accordance with the DSC 1.2
+ * specification. Some configuration fields must be present
+ * beforehand.
+ *
+ * @vdsc_cfg:
+ * DSC Configuration data partially filled by driver
+ */
+int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg)
+{
+ unsigned long groups_per_line = 0;
+ unsigned long groups_total = 0;
+ unsigned long num_extra_mux_bits = 0;
+ unsigned long slice_bits = 0;
+ unsigned long hrd_delay = 0;
+ unsigned long final_scale = 0;
+ unsigned long rbs_min = 0;
+
+ if (vdsc_cfg->native_420 || vdsc_cfg->native_422) {
+ /* Number of groups used to code each line of a slice */
+ groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width / 2,
+ DSC_RC_PIXELS_PER_GROUP);
+
+ /* chunksize in Bytes */
+ vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width / 2 *
+ vdsc_cfg->bits_per_pixel,
+ (8 * 16));
+ } else {
+ /* Number of groups used to code each line of a slice */
+ groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width,
+ DSC_RC_PIXELS_PER_GROUP);
+
+ /* chunksize in Bytes */
+ vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width *
+ vdsc_cfg->bits_per_pixel,
+ (8 * 16));
+ }
+
+ if (vdsc_cfg->convert_rgb)
+ num_extra_mux_bits = 3 * (vdsc_cfg->mux_word_size +
+ (4 * vdsc_cfg->bits_per_component + 4)
+ - 2);
+ else if (vdsc_cfg->native_422)
+ num_extra_mux_bits = 4 * vdsc_cfg->mux_word_size +
+ (4 * vdsc_cfg->bits_per_component + 4) +
+ 3 * (4 * vdsc_cfg->bits_per_component) - 2;
+ else
+ num_extra_mux_bits = 3 * vdsc_cfg->mux_word_size +
+ (4 * vdsc_cfg->bits_per_component + 4) +
+ 2 * (4 * vdsc_cfg->bits_per_component) - 2;
+ /* Number of bits in one Slice */
+ slice_bits = 8 * vdsc_cfg->slice_chunk_size * vdsc_cfg->slice_height;
+
+ while ((num_extra_mux_bits > 0) &&
+ ((slice_bits - num_extra_mux_bits) % vdsc_cfg->mux_word_size))
+ num_extra_mux_bits--;
+
+ if (groups_per_line < vdsc_cfg->initial_scale_value - 8)
+ vdsc_cfg->initial_scale_value = groups_per_line + 8;
+
+ /* scale_decrement_interval calculation according to DSC spec 1.11 */
+ if (vdsc_cfg->initial_scale_value > 8)
+ vdsc_cfg->scale_decrement_interval = groups_per_line /
+ (vdsc_cfg->initial_scale_value - 8);
+ else
+ vdsc_cfg->scale_decrement_interval = DSC_SCALE_DECREMENT_INTERVAL_MAX;
+
+ vdsc_cfg->final_offset = vdsc_cfg->rc_model_size -
+ (vdsc_cfg->initial_xmit_delay *
+ vdsc_cfg->bits_per_pixel + 8) / 16 + num_extra_mux_bits;
+
+ if (vdsc_cfg->final_offset >= vdsc_cfg->rc_model_size) {
+ DRM_DEBUG_KMS("FinalOfs < RcModelSze for this InitialXmitDelay\n");
+ return -ERANGE;
+ }
+
+ final_scale = (vdsc_cfg->rc_model_size * 8) /
+ (vdsc_cfg->rc_model_size - vdsc_cfg->final_offset);
+ if (vdsc_cfg->slice_height > 1)
+ /*
+ * NflBpgOffset is 16 bit value with 11 fractional bits
+ * hence we multiply by 2^11 for preserving the
+ * fractional part
+ */
+ vdsc_cfg->nfl_bpg_offset = DIV_ROUND_UP((vdsc_cfg->first_line_bpg_offset << 11),
+ (vdsc_cfg->slice_height - 1));
+ else
+ vdsc_cfg->nfl_bpg_offset = 0;
+
+ /* Number of groups used to code the entire slice */
+ groups_total = groups_per_line * vdsc_cfg->slice_height;
+
+ /* slice_bpg_offset is 16 bit value with 11 fractional bits */
+ vdsc_cfg->slice_bpg_offset = DIV_ROUND_UP(((vdsc_cfg->rc_model_size -
+ vdsc_cfg->initial_offset +
+ num_extra_mux_bits) << 11),
+ groups_total);
+
+ if (final_scale > 9) {
+ /*
+ * ScaleIncrementInterval =
+ * finaloffset/((NflBpgOffset + SliceBpgOffset)*8(finalscale - 1.125))
+ * as (NflBpgOffset + SliceBpgOffset) has 11 bit fractional value,
+ * we need divide by 2^11 from pstDscCfg values
+ */
+ vdsc_cfg->scale_increment_interval =
+ (vdsc_cfg->final_offset * (1 << 11)) /
+ ((vdsc_cfg->nfl_bpg_offset +
+ vdsc_cfg->slice_bpg_offset) *
+ (final_scale - 9));
+ } else {
+ /*
+ * If finalScaleValue is less than or equal to 9, a value of 0 should
+ * be used to disable the scale increment at the end of the slice
+ */
+ vdsc_cfg->scale_increment_interval = 0;
+ }
+
+ /*
+ * DSC spec mentions that bits_per_pixel specifies the target
+ * bits/pixel (bpp) rate that is used by the encoder,
+ * in steps of 1/16 of a bit per pixel
+ */
+ rbs_min = vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset +
+ DIV_ROUND_UP(vdsc_cfg->initial_xmit_delay *
+ vdsc_cfg->bits_per_pixel, 16) +
+ groups_per_line * vdsc_cfg->first_line_bpg_offset;
+
+ hrd_delay = DIV_ROUND_UP((rbs_min * 16), vdsc_cfg->bits_per_pixel);
+ vdsc_cfg->rc_bits = (hrd_delay * vdsc_cfg->bits_per_pixel) / 16;
+ vdsc_cfg->initial_dec_delay = hrd_delay - vdsc_cfg->initial_xmit_delay;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_dsc_compute_rc_parameters);
+++ /dev/null
-// SPDX-License-Identifier: MIT
-/*
- * Copyright © 2018 Intel Corp
- *
- * Author:
- * Manasi Navare <manasi.d.navare@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/byteorder/generic.h>
-
-#include <drm/display/drm_dp_helper.h>
-#include <drm/drm_print.h>
-#include <drm/drm_dsc.h>
-
-/**
- * DOC: dsc helpers
- *
- * VESA specification for DP 1.4 adds a new feature called Display Stream
- * Compression (DSC) used to compress the pixel bits before sending it on
- * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing
- * display interfaces can support high resolutions at higher frames rates uisng
- * the maximum available link capacity of these interfaces.
- *
- * These functions contain some common logic and helpers to deal with VESA
- * Display Stream Compression standard required for DSC on Display Port/eDP or
- * MIPI display interfaces.
- */
-
-/**
- * drm_dsc_dp_pps_header_init() - Initializes the PPS Header
- * for DisplayPort as per the DP 1.4 spec.
- * @pps_header: Secondary data packet header for DSC Picture
- * Parameter Set as defined in &struct dp_sdp_header
- *
- * DP 1.4 spec defines the secondary data packet for sending the
- * picture parameter infoframes from the source to the sink.
- * This function populates the SDP header defined in
- * &struct dp_sdp_header.
- */
-void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header)
-{
- memset(pps_header, 0, sizeof(*pps_header));
-
- pps_header->HB1 = DP_SDP_PPS;
- pps_header->HB2 = DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1;
-}
-EXPORT_SYMBOL(drm_dsc_dp_pps_header_init);
-
-/**
- * drm_dsc_dp_rc_buffer_size - get rc buffer size in bytes
- * @rc_buffer_block_size: block size code, according to DPCD offset 62h
- * @rc_buffer_size: number of blocks - 1, according to DPCD offset 63h
- *
- * return:
- * buffer size in bytes, or 0 on invalid input
- */
-int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size)
-{
- int size = 1024 * (rc_buffer_size + 1);
-
- switch (rc_buffer_block_size) {
- case DP_DSC_RC_BUF_BLK_SIZE_1:
- return 1 * size;
- case DP_DSC_RC_BUF_BLK_SIZE_4:
- return 4 * size;
- case DP_DSC_RC_BUF_BLK_SIZE_16:
- return 16 * size;
- case DP_DSC_RC_BUF_BLK_SIZE_64:
- return 64 * size;
- default:
- return 0;
- }
-}
-EXPORT_SYMBOL(drm_dsc_dp_rc_buffer_size);
-
-/**
- * drm_dsc_pps_payload_pack() - Populates the DSC PPS
- *
- * @pps_payload:
- * Bitwise struct for DSC Picture Parameter Set. This is defined
- * by &struct drm_dsc_picture_parameter_set
- * @dsc_cfg:
- * DSC Configuration data filled by driver as defined by
- * &struct drm_dsc_config
- *
- * DSC source device sends a picture parameter set (PPS) containing the
- * information required by the sink to decode the compressed frame. Driver
- * populates the DSC PPS struct using the DSC configuration parameters in
- * the order expected by the DSC Display Sink device. For the DSC, the sink
- * device expects the PPS payload in big endian format for fields
- * that span more than 1 byte.
- */
-void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload,
- const struct drm_dsc_config *dsc_cfg)
-{
- int i;
-
- /* Protect against someone accidentally changing struct size */
- BUILD_BUG_ON(sizeof(*pps_payload) !=
- DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 + 1);
-
- memset(pps_payload, 0, sizeof(*pps_payload));
-
- /* PPS 0 */
- pps_payload->dsc_version =
- dsc_cfg->dsc_version_minor |
- dsc_cfg->dsc_version_major << DSC_PPS_VERSION_MAJOR_SHIFT;
-
- /* PPS 1, 2 is 0 */
-
- /* PPS 3 */
- pps_payload->pps_3 =
- dsc_cfg->line_buf_depth |
- dsc_cfg->bits_per_component << DSC_PPS_BPC_SHIFT;
-
- /* PPS 4 */
- pps_payload->pps_4 =
- ((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >>
- DSC_PPS_MSB_SHIFT) |
- dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT |
- dsc_cfg->simple_422 << DSC_PPS_SIMPLE422_SHIFT |
- dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT |
- dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT;
-
- /* PPS 5 */
- pps_payload->bits_per_pixel_low =
- (dsc_cfg->bits_per_pixel & DSC_PPS_LSB_MASK);
-
- /*
- * The DSC panel expects the PPS packet to have big endian format
- * for data spanning 2 bytes. Use a macro cpu_to_be16() to convert
- * to big endian format. If format is little endian, it will swap
- * bytes to convert to Big endian else keep it unchanged.
- */
-
- /* PPS 6, 7 */
- pps_payload->pic_height = cpu_to_be16(dsc_cfg->pic_height);
-
- /* PPS 8, 9 */
- pps_payload->pic_width = cpu_to_be16(dsc_cfg->pic_width);
-
- /* PPS 10, 11 */
- pps_payload->slice_height = cpu_to_be16(dsc_cfg->slice_height);
-
- /* PPS 12, 13 */
- pps_payload->slice_width = cpu_to_be16(dsc_cfg->slice_width);
-
- /* PPS 14, 15 */
- pps_payload->chunk_size = cpu_to_be16(dsc_cfg->slice_chunk_size);
-
- /* PPS 16 */
- pps_payload->initial_xmit_delay_high =
- ((dsc_cfg->initial_xmit_delay &
- DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK) >>
- DSC_PPS_MSB_SHIFT);
-
- /* PPS 17 */
- pps_payload->initial_xmit_delay_low =
- (dsc_cfg->initial_xmit_delay & DSC_PPS_LSB_MASK);
-
- /* PPS 18, 19 */
- pps_payload->initial_dec_delay =
- cpu_to_be16(dsc_cfg->initial_dec_delay);
-
- /* PPS 20 is 0 */
-
- /* PPS 21 */
- pps_payload->initial_scale_value =
- dsc_cfg->initial_scale_value;
-
- /* PPS 22, 23 */
- pps_payload->scale_increment_interval =
- cpu_to_be16(dsc_cfg->scale_increment_interval);
-
- /* PPS 24 */
- pps_payload->scale_decrement_interval_high =
- ((dsc_cfg->scale_decrement_interval &
- DSC_PPS_SCALE_DEC_INT_HIGH_MASK) >>
- DSC_PPS_MSB_SHIFT);
-
- /* PPS 25 */
- pps_payload->scale_decrement_interval_low =
- (dsc_cfg->scale_decrement_interval & DSC_PPS_LSB_MASK);
-
- /* PPS 26[7:0], PPS 27[7:5] RESERVED */
-
- /* PPS 27 */
- pps_payload->first_line_bpg_offset =
- dsc_cfg->first_line_bpg_offset;
-
- /* PPS 28, 29 */
- pps_payload->nfl_bpg_offset =
- cpu_to_be16(dsc_cfg->nfl_bpg_offset);
-
- /* PPS 30, 31 */
- pps_payload->slice_bpg_offset =
- cpu_to_be16(dsc_cfg->slice_bpg_offset);
-
- /* PPS 32, 33 */
- pps_payload->initial_offset =
- cpu_to_be16(dsc_cfg->initial_offset);
-
- /* PPS 34, 35 */
- pps_payload->final_offset = cpu_to_be16(dsc_cfg->final_offset);
-
- /* PPS 36 */
- pps_payload->flatness_min_qp = dsc_cfg->flatness_min_qp;
-
- /* PPS 37 */
- pps_payload->flatness_max_qp = dsc_cfg->flatness_max_qp;
-
- /* PPS 38, 39 */
- pps_payload->rc_model_size = cpu_to_be16(dsc_cfg->rc_model_size);
-
- /* PPS 40 */
- pps_payload->rc_edge_factor = DSC_RC_EDGE_FACTOR_CONST;
-
- /* PPS 41 */
- pps_payload->rc_quant_incr_limit0 =
- dsc_cfg->rc_quant_incr_limit0;
-
- /* PPS 42 */
- pps_payload->rc_quant_incr_limit1 =
- dsc_cfg->rc_quant_incr_limit1;
-
- /* PPS 43 */
- pps_payload->rc_tgt_offset = DSC_RC_TGT_OFFSET_LO_CONST |
- DSC_RC_TGT_OFFSET_HI_CONST << DSC_PPS_RC_TGT_OFFSET_HI_SHIFT;
-
- /* PPS 44 - 57 */
- for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++)
- pps_payload->rc_buf_thresh[i] =
- dsc_cfg->rc_buf_thresh[i];
-
- /* PPS 58 - 87 */
- /*
- * For DSC sink programming the RC Range parameter fields
- * are as follows: Min_qp[15:11], max_qp[10:6], offset[5:0]
- */
- for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
- pps_payload->rc_range_parameters[i] =
- cpu_to_be16((dsc_cfg->rc_range_params[i].range_min_qp <<
- DSC_PPS_RC_RANGE_MINQP_SHIFT) |
- (dsc_cfg->rc_range_params[i].range_max_qp <<
- DSC_PPS_RC_RANGE_MAXQP_SHIFT) |
- (dsc_cfg->rc_range_params[i].range_bpg_offset));
- }
-
- /* PPS 88 */
- pps_payload->native_422_420 = dsc_cfg->native_422 |
- dsc_cfg->native_420 << DSC_PPS_NATIVE_420_SHIFT;
-
- /* PPS 89 */
- pps_payload->second_line_bpg_offset =
- dsc_cfg->second_line_bpg_offset;
-
- /* PPS 90, 91 */
- pps_payload->nsl_bpg_offset =
- cpu_to_be16(dsc_cfg->nsl_bpg_offset);
-
- /* PPS 92, 93 */
- pps_payload->second_line_offset_adj =
- cpu_to_be16(dsc_cfg->second_line_offset_adj);
-
- /* PPS 94 - 127 are O */
-}
-EXPORT_SYMBOL(drm_dsc_pps_payload_pack);
-
-/**
- * drm_dsc_compute_rc_parameters() - Write rate control
- * parameters to the dsc configuration defined in
- * &struct drm_dsc_config in accordance with the DSC 1.2
- * specification. Some configuration fields must be present
- * beforehand.
- *
- * @vdsc_cfg:
- * DSC Configuration data partially filled by driver
- */
-int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg)
-{
- unsigned long groups_per_line = 0;
- unsigned long groups_total = 0;
- unsigned long num_extra_mux_bits = 0;
- unsigned long slice_bits = 0;
- unsigned long hrd_delay = 0;
- unsigned long final_scale = 0;
- unsigned long rbs_min = 0;
-
- if (vdsc_cfg->native_420 || vdsc_cfg->native_422) {
- /* Number of groups used to code each line of a slice */
- groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width / 2,
- DSC_RC_PIXELS_PER_GROUP);
-
- /* chunksize in Bytes */
- vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width / 2 *
- vdsc_cfg->bits_per_pixel,
- (8 * 16));
- } else {
- /* Number of groups used to code each line of a slice */
- groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width,
- DSC_RC_PIXELS_PER_GROUP);
-
- /* chunksize in Bytes */
- vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width *
- vdsc_cfg->bits_per_pixel,
- (8 * 16));
- }
-
- if (vdsc_cfg->convert_rgb)
- num_extra_mux_bits = 3 * (vdsc_cfg->mux_word_size +
- (4 * vdsc_cfg->bits_per_component + 4)
- - 2);
- else if (vdsc_cfg->native_422)
- num_extra_mux_bits = 4 * vdsc_cfg->mux_word_size +
- (4 * vdsc_cfg->bits_per_component + 4) +
- 3 * (4 * vdsc_cfg->bits_per_component) - 2;
- else
- num_extra_mux_bits = 3 * vdsc_cfg->mux_word_size +
- (4 * vdsc_cfg->bits_per_component + 4) +
- 2 * (4 * vdsc_cfg->bits_per_component) - 2;
- /* Number of bits in one Slice */
- slice_bits = 8 * vdsc_cfg->slice_chunk_size * vdsc_cfg->slice_height;
-
- while ((num_extra_mux_bits > 0) &&
- ((slice_bits - num_extra_mux_bits) % vdsc_cfg->mux_word_size))
- num_extra_mux_bits--;
-
- if (groups_per_line < vdsc_cfg->initial_scale_value - 8)
- vdsc_cfg->initial_scale_value = groups_per_line + 8;
-
- /* scale_decrement_interval calculation according to DSC spec 1.11 */
- if (vdsc_cfg->initial_scale_value > 8)
- vdsc_cfg->scale_decrement_interval = groups_per_line /
- (vdsc_cfg->initial_scale_value - 8);
- else
- vdsc_cfg->scale_decrement_interval = DSC_SCALE_DECREMENT_INTERVAL_MAX;
-
- vdsc_cfg->final_offset = vdsc_cfg->rc_model_size -
- (vdsc_cfg->initial_xmit_delay *
- vdsc_cfg->bits_per_pixel + 8) / 16 + num_extra_mux_bits;
-
- if (vdsc_cfg->final_offset >= vdsc_cfg->rc_model_size) {
- DRM_DEBUG_KMS("FinalOfs < RcModelSze for this InitialXmitDelay\n");
- return -ERANGE;
- }
-
- final_scale = (vdsc_cfg->rc_model_size * 8) /
- (vdsc_cfg->rc_model_size - vdsc_cfg->final_offset);
- if (vdsc_cfg->slice_height > 1)
- /*
- * NflBpgOffset is 16 bit value with 11 fractional bits
- * hence we multiply by 2^11 for preserving the
- * fractional part
- */
- vdsc_cfg->nfl_bpg_offset = DIV_ROUND_UP((vdsc_cfg->first_line_bpg_offset << 11),
- (vdsc_cfg->slice_height - 1));
- else
- vdsc_cfg->nfl_bpg_offset = 0;
-
- /* Number of groups used to code the entire slice */
- groups_total = groups_per_line * vdsc_cfg->slice_height;
-
- /* slice_bpg_offset is 16 bit value with 11 fractional bits */
- vdsc_cfg->slice_bpg_offset = DIV_ROUND_UP(((vdsc_cfg->rc_model_size -
- vdsc_cfg->initial_offset +
- num_extra_mux_bits) << 11),
- groups_total);
-
- if (final_scale > 9) {
- /*
- * ScaleIncrementInterval =
- * finaloffset/((NflBpgOffset + SliceBpgOffset)*8(finalscale - 1.125))
- * as (NflBpgOffset + SliceBpgOffset) has 11 bit fractional value,
- * we need divide by 2^11 from pstDscCfg values
- */
- vdsc_cfg->scale_increment_interval =
- (vdsc_cfg->final_offset * (1 << 11)) /
- ((vdsc_cfg->nfl_bpg_offset +
- vdsc_cfg->slice_bpg_offset) *
- (final_scale - 9));
- } else {
- /*
- * If finalScaleValue is less than or equal to 9, a value of 0 should
- * be used to disable the scale increment at the end of the slice
- */
- vdsc_cfg->scale_increment_interval = 0;
- }
-
- /*
- * DSC spec mentions that bits_per_pixel specifies the target
- * bits/pixel (bpp) rate that is used by the encoder,
- * in steps of 1/16 of a bit per pixel
- */
- rbs_min = vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset +
- DIV_ROUND_UP(vdsc_cfg->initial_xmit_delay *
- vdsc_cfg->bits_per_pixel, 16) +
- groups_per_line * vdsc_cfg->first_line_bpg_offset;
-
- hrd_delay = DIV_ROUND_UP((rbs_min * 16), vdsc_cfg->bits_per_pixel);
- vdsc_cfg->rc_bits = (hrd_delay * vdsc_cfg->bits_per_pixel) / 16;
- vdsc_cfg->initial_dec_delay = hrd_delay - vdsc_cfg->initial_xmit_delay;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_dsc_compute_rc_parameters);
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <drm/drm_mipi_dsi.h>
-
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/drm_mipi_dsi.h>
#include <drm/drm_print.h>
+
#include <video/mipi_display.h>
/**
* Jani Nikula <jani.nikula@intel.com>
*/
+#include <drm/display/drm_dsc_helper.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_mipi_dsi.h>
*/
#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_dsc_helper.h>
#include "display/intel_display.h"
#include "display/intel_display_types.h"
#include <drm/display/drm_dp_dual_mode_helper.h>
#include <drm/display/drm_dp_mst_helper.h>
+#include <drm/display/drm_dsc.h>
#include <drm/drm_atomic.h>
#include <drm/drm_crtc.h>
-#include <drm/drm_dsc.h>
#include <drm/drm_encoder.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_probe_helper.h>
#include <asm/byteorder.h>
#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_dsc_helper.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
* Copyright © 2021 Intel Corporation
*/
-#include <drm/drm_dsc.h>
+#include <drm/display/drm_dsc.h>
#include "i915_utils.h"
#include "intel_qp_tables.h"
*/
#include <linux/limits.h>
+#include <drm/display/drm_dsc_helper.h>
+
#include "i915_drv.h"
#include "intel_crtc.h"
#include "intel_de.h"
--- /dev/null
+/* SPDX-License-Identifier: MIT
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * Authors:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#ifndef DRM_DSC_H_
+#define DRM_DSC_H_
+
+#include <drm/display/drm_dp.h>
+
+/* VESA Display Stream Compression DSC 1.2 constants */
+#define DSC_NUM_BUF_RANGES 15
+#define DSC_MUX_WORD_SIZE_8_10_BPC 48
+#define DSC_MUX_WORD_SIZE_12_BPC 64
+#define DSC_RC_PIXELS_PER_GROUP 3
+#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
+#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
+
+/* DSC Rate Control Constants */
+#define DSC_RC_MODEL_SIZE_CONST 8192
+#define DSC_RC_EDGE_FACTOR_CONST 6
+#define DSC_RC_TGT_OFFSET_HI_CONST 3
+#define DSC_RC_TGT_OFFSET_LO_CONST 3
+
+/* DSC PPS constants and macros */
+#define DSC_PPS_VERSION_MAJOR_SHIFT 4
+#define DSC_PPS_BPC_SHIFT 4
+#define DSC_PPS_MSB_SHIFT 8
+#define DSC_PPS_LSB_MASK (0xFF << 0)
+#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8)
+#define DSC_PPS_VBR_EN_SHIFT 2
+#define DSC_PPS_SIMPLE422_SHIFT 3
+#define DSC_PPS_CONVERT_RGB_SHIFT 4
+#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5
+#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8)
+#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8)
+#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4
+#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
+#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
+#define DSC_PPS_NATIVE_420_SHIFT 1
+#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
+#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
+#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
+
+/**
+ * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
+ *
+ * This defines different rate control parameters used by the DSC engine
+ * to compress the frame.
+ */
+struct drm_dsc_rc_range_parameters {
+ /**
+ * @range_min_qp: Min Quantization Parameters allowed for this range
+ */
+ u8 range_min_qp;
+ /**
+ * @range_max_qp: Max Quantization Parameters allowed for this range
+ */
+ u8 range_max_qp;
+ /**
+ * @range_bpg_offset:
+ * Bits/group offset to apply to target for this group
+ */
+ u8 range_bpg_offset;
+};
+
+/**
+ * struct drm_dsc_config - Parameters required to configure DSC
+ *
+ * Driver populates this structure with all the parameters required
+ * to configure the display stream compression on the source.
+ */
+struct drm_dsc_config {
+ /**
+ * @line_buf_depth:
+ * Bits per component for previous reconstructed line buffer
+ */
+ u8 line_buf_depth;
+ /**
+ * @bits_per_component: Bits per component to code (8/10/12)
+ */
+ u8 bits_per_component;
+ /**
+ * @convert_rgb:
+ * Flag to indicate if RGB - YCoCg conversion is needed
+ * True if RGB input, False if YCoCg input
+ */
+ bool convert_rgb;
+ /**
+ * @slice_count: Number fo slices per line used by the DSC encoder
+ */
+ u8 slice_count;
+ /**
+ * @slice_width: Width of each slice in pixels
+ */
+ u16 slice_width;
+ /**
+ * @slice_height: Slice height in pixels
+ */
+ u16 slice_height;
+ /**
+ * @simple_422: True if simple 4_2_2 mode is enabled else False
+ */
+ bool simple_422;
+ /**
+ * @pic_width: Width of the input display frame in pixels
+ */
+ u16 pic_width;
+ /**
+ * @pic_height: Vertical height of the input display frame
+ */
+ u16 pic_height;
+ /**
+ * @rc_tgt_offset_high:
+ * Offset to bits/group used by RC to determine QP adjustment
+ */
+ u8 rc_tgt_offset_high;
+ /**
+ * @rc_tgt_offset_low:
+ * Offset to bits/group used by RC to determine QP adjustment
+ */
+ u8 rc_tgt_offset_low;
+ /**
+ * @bits_per_pixel:
+ * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
+ */
+ u16 bits_per_pixel;
+ /**
+ * @rc_edge_factor:
+ * Factor to determine if an edge is present based on the bits produced
+ */
+ u8 rc_edge_factor;
+ /**
+ * @rc_quant_incr_limit1:
+ * Slow down incrementing once the range reaches this value
+ */
+ u8 rc_quant_incr_limit1;
+ /**
+ * @rc_quant_incr_limit0:
+ * Slow down incrementing once the range reaches this value
+ */
+ u8 rc_quant_incr_limit0;
+ /**
+ * @initial_xmit_delay:
+ * Number of pixels to delay the initial transmission
+ */
+ u16 initial_xmit_delay;
+ /**
+ * @initial_dec_delay:
+ * Initial decoder delay, number of pixel times that the decoder
+ * accumulates data in its rate buffer before starting to decode
+ * and output pixels.
+ */
+ u16 initial_dec_delay;
+ /**
+ * @block_pred_enable:
+ * True if block prediction is used to code any groups within the
+ * picture. False if BP not used
+ */
+ bool block_pred_enable;
+ /**
+ * @first_line_bpg_offset:
+ * Number of additional bits allocated for each group on the first
+ * line of slice.
+ */
+ u8 first_line_bpg_offset;
+ /**
+ * @initial_offset: Value to use for RC model offset at slice start
+ */
+ u16 initial_offset;
+ /**
+ * @rc_buf_thresh: Thresholds defining each of the buffer ranges
+ */
+ u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
+ /**
+ * @rc_range_params:
+ * Parameters for each of the RC ranges defined in
+ * &struct drm_dsc_rc_range_parameters
+ */
+ struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
+ /**
+ * @rc_model_size: Total size of RC model
+ */
+ u16 rc_model_size;
+ /**
+ * @flatness_min_qp: Minimum QP where flatness information is sent
+ */
+ u8 flatness_min_qp;
+ /**
+ * @flatness_max_qp: Maximum QP where flatness information is sent
+ */
+ u8 flatness_max_qp;
+ /**
+ * @initial_scale_value: Initial value for the scale factor
+ */
+ u8 initial_scale_value;
+ /**
+ * @scale_decrement_interval:
+ * Specifies number of group times between decrementing the scale factor
+ * at beginning of a slice.
+ */
+ u16 scale_decrement_interval;
+ /**
+ * @scale_increment_interval:
+ * Number of group times between incrementing the scale factor value
+ * used at the beginning of a slice.
+ */
+ u16 scale_increment_interval;
+ /**
+ * @nfl_bpg_offset: Non first line BPG offset to be used
+ */
+ u16 nfl_bpg_offset;
+ /**
+ * @slice_bpg_offset: BPG offset used to enforce slice bit
+ */
+ u16 slice_bpg_offset;
+ /**
+ * @final_offset: Final RC linear transformation offset value
+ */
+ u16 final_offset;
+ /**
+ * @vbr_enable: True if VBR mode is enabled, false if disabled
+ */
+ bool vbr_enable;
+ /**
+ * @mux_word_size: Mux word size (in bits) for SSM mode
+ */
+ u8 mux_word_size;
+ /**
+ * @slice_chunk_size:
+ * The (max) size in bytes of the "chunks" that are used in slice
+ * multiplexing.
+ */
+ u16 slice_chunk_size;
+ /**
+ * @rc_bits: Rate control buffer size in bits
+ */
+ u16 rc_bits;
+ /**
+ * @dsc_version_minor: DSC minor version
+ */
+ u8 dsc_version_minor;
+ /**
+ * @dsc_version_major: DSC major version
+ */
+ u8 dsc_version_major;
+ /**
+ * @native_422: True if Native 4:2:2 supported, else false
+ */
+ bool native_422;
+ /**
+ * @native_420: True if Native 4:2:0 supported else false.
+ */
+ bool native_420;
+ /**
+ * @second_line_bpg_offset:
+ * Additional bits/grp for seconnd line of slice for native 4:2:0
+ */
+ u8 second_line_bpg_offset;
+ /**
+ * @nsl_bpg_offset:
+ * Num of bits deallocated for each grp that is not in second line of
+ * slice
+ */
+ u16 nsl_bpg_offset;
+ /**
+ * @second_line_offset_adj:
+ * Offset adjustment for second line in Native 4:2:0 mode
+ */
+ u16 second_line_offset_adj;
+};
+
+/**
+ * struct drm_dsc_picture_parameter_set - Represents 128 bytes of
+ * Picture Parameter Set
+ *
+ * The VESA DSC standard defines picture parameter set (PPS) which display
+ * stream compression encoders must communicate to decoders.
+ * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in
+ * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
+ * The PPS fields that span over more than a byte should be stored in Big Endian
+ * format.
+ */
+struct drm_dsc_picture_parameter_set {
+ /**
+ * @dsc_version:
+ * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
+ * PPS0[7:4] - dsc_version_major: Contains major version of DSC
+ */
+ u8 dsc_version;
+ /**
+ * @pps_identifier:
+ * PPS1[7:0] - Application specific identifier that can be
+ * used to differentiate between different PPS tables.
+ */
+ u8 pps_identifier;
+ /**
+ * @pps_reserved:
+ * PPS2[7:0]- RESERVED Byte
+ */
+ u8 pps_reserved;
+ /**
+ * @pps_3:
+ * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
+ * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
+ * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
+ * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
+ * PPS3[7:4] - bits_per_component: Bits per component for the original
+ * pixels of the encoded picture.
+ * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
+ * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
+ * allowed only when dsc_minor_version = 0x2)
+ */
+ u8 pps_3;
+ /**
+ * @pps_4:
+ * PPS4[1:0] -These are the most significant 2 bits of
+ * compressed BPP bits_per_pixel[9:0] syntax element.
+ * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
+ * PPS4[3] - simple_422: Indicates if decoder drops samples to
+ * reconstruct the 4:2:2 picture.
+ * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
+ * active.
+ * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
+ * groups in picture
+ * PPS4[7:6] - Reseved bits
+ */
+ u8 pps_4;
+ /**
+ * @bits_per_pixel_low:
+ * PPS5[7:0] - This indicates the lower significant 8 bits of
+ * the compressed BPP bits_per_pixel[9:0] element.
+ */
+ u8 bits_per_pixel_low;
+ /**
+ * @pic_height:
+ * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
+ * within the raster.
+ */
+ __be16 pic_height;
+ /**
+ * @pic_width:
+ * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
+ * the raster.
+ */
+ __be16 pic_width;
+ /**
+ * @slice_height:
+ * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
+ */
+ __be16 slice_height;
+ /**
+ * @slice_width:
+ * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
+ */
+ __be16 slice_width;
+ /**
+ * @chunk_size:
+ * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
+ * that are used for slice multiplexing.
+ */
+ __be16 chunk_size;
+ /**
+ * @initial_xmit_delay_high:
+ * PPS16[1:0] - Most Significant two bits of initial transmission delay.
+ * It specifies the number of pixel times that the encoder waits before
+ * transmitting data from its rate buffer.
+ * PPS16[7:2] - Reserved
+ */
+ u8 initial_xmit_delay_high;
+ /**
+ * @initial_xmit_delay_low:
+ * PPS17[7:0] - Least significant 8 bits of initial transmission delay.
+ */
+ u8 initial_xmit_delay_low;
+ /**
+ * @initial_dec_delay:
+ *
+ * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
+ * of pixel times that the decoder accumulates data in its rate buffer
+ * before starting to decode and output pixels.
+ */
+ __be16 initial_dec_delay;
+ /**
+ * @pps20_reserved:
+ *
+ * PPS20[7:0] - Reserved
+ */
+ u8 pps20_reserved;
+ /**
+ * @initial_scale_value:
+ * PPS21[5:0] - Initial rcXformScale factor used at beginning
+ * of a slice.
+ * PPS21[7:6] - Reserved
+ */
+ u8 initial_scale_value;
+ /**
+ * @scale_increment_interval:
+ * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
+ * the rcXformScale factor at end of a slice.
+ */
+ __be16 scale_increment_interval;
+ /**
+ * @scale_decrement_interval_high:
+ * PPS24[3:0] - Higher 4 bits indicating number of group times between
+ * decrementing the rcXformScale factor at beginning of a slice.
+ * PPS24[7:4] - Reserved
+ */
+ u8 scale_decrement_interval_high;
+ /**
+ * @scale_decrement_interval_low:
+ * PPS25[7:0] - Lower 8 bits of scale decrement interval
+ */
+ u8 scale_decrement_interval_low;
+ /**
+ * @pps26_reserved:
+ * PPS26[7:0]
+ */
+ u8 pps26_reserved;
+ /**
+ * @first_line_bpg_offset:
+ * PPS27[4:0] - Number of additional bits that are allocated
+ * for each group on first line of a slice.
+ * PPS27[7:5] - Reserved
+ */
+ u8 first_line_bpg_offset;
+ /**
+ * @nfl_bpg_offset:
+ * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
+ * deallocated for each group for groups after the first line of slice.
+ */
+ __be16 nfl_bpg_offset;
+ /**
+ * @slice_bpg_offset:
+ * PPS30, PPS31[7:0] - Number of bits that are deallocated for each
+ * group to enforce the slice constraint.
+ */
+ __be16 slice_bpg_offset;
+ /**
+ * @initial_offset:
+ * PPS32,33[7:0] - Initial value for rcXformOffset
+ */
+ __be16 initial_offset;
+ /**
+ * @final_offset:
+ * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
+ */
+ __be16 final_offset;
+ /**
+ * @flatness_min_qp:
+ * PPS36[4:0] - Minimum QP at which flatness is signaled and
+ * flatness QP adjustment is made.
+ * PPS36[7:5] - Reserved
+ */
+ u8 flatness_min_qp;
+ /**
+ * @flatness_max_qp:
+ * PPS37[4:0] - Max QP at which flatness is signalled and
+ * the flatness adjustment is made.
+ * PPS37[7:5] - Reserved
+ */
+ u8 flatness_max_qp;
+ /**
+ * @rc_model_size:
+ * PPS38,39[7:0] - Number of bits within RC Model.
+ */
+ __be16 rc_model_size;
+ /**
+ * @rc_edge_factor:
+ * PPS40[3:0] - Ratio of current activity vs, previous
+ * activity to determine presence of edge.
+ * PPS40[7:4] - Reserved
+ */
+ u8 rc_edge_factor;
+ /**
+ * @rc_quant_incr_limit0:
+ * PPS41[4:0] - QP threshold used in short term RC
+ * PPS41[7:5] - Reserved
+ */
+ u8 rc_quant_incr_limit0;
+ /**
+ * @rc_quant_incr_limit1:
+ * PPS42[4:0] - QP threshold used in short term RC
+ * PPS42[7:5] - Reserved
+ */
+ u8 rc_quant_incr_limit1;
+ /**
+ * @rc_tgt_offset:
+ * PPS43[3:0] - Lower end of the variability range around the target
+ * bits per group that is allowed by short term RC.
+ * PPS43[7:4]- Upper end of the variability range around the target
+ * bits per group that i allowed by short term rc.
+ */
+ u8 rc_tgt_offset;
+ /**
+ * @rc_buf_thresh:
+ * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
+ * the 15 ranges defined by 14 thresholds.
+ */
+ u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
+ /**
+ * @rc_range_parameters:
+ * PPS58[7:0] - PPS87[7:0]
+ * Parameters that correspond to each of the 15 ranges.
+ */
+ __be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
+ /**
+ * @native_422_420:
+ * PPS88[0] - 0 = Native 4:2:2 not used
+ * 1 = Native 4:2:2 used
+ * PPS88[1] - 0 = Native 4:2:0 not use
+ * 1 = Native 4:2:0 used
+ * PPS88[7:2] - Reserved 6 bits
+ */
+ u8 native_422_420;
+ /**
+ * @second_line_bpg_offset:
+ * PPS89[4:0] - Additional bits/group budget for the
+ * second line of a slice in Native 4:2:0 mode.
+ * Set to 0 if DSC minor version is 1 or native420 is 0.
+ * PPS89[7:5] - Reserved
+ */
+ u8 second_line_bpg_offset;
+ /**
+ * @nsl_bpg_offset:
+ * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
+ * for each group that is not in the second line of a slice.
+ */
+ __be16 nsl_bpg_offset;
+ /**
+ * @second_line_offset_adj:
+ * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
+ * line in Native 4:2:0 mode.
+ */
+ __be16 second_line_offset_adj;
+ /**
+ * @pps_long_94_reserved:
+ * PPS 94, 95, 96, 97 - Reserved
+ */
+ u32 pps_long_94_reserved;
+ /**
+ * @pps_long_98_reserved:
+ * PPS 98, 99, 100, 101 - Reserved
+ */
+ u32 pps_long_98_reserved;
+ /**
+ * @pps_long_102_reserved:
+ * PPS 102, 103, 104, 105 - Reserved
+ */
+ u32 pps_long_102_reserved;
+ /**
+ * @pps_long_106_reserved:
+ * PPS 106, 107, 108, 109 - reserved
+ */
+ u32 pps_long_106_reserved;
+ /**
+ * @pps_long_110_reserved:
+ * PPS 110, 111, 112, 113 - reserved
+ */
+ u32 pps_long_110_reserved;
+ /**
+ * @pps_long_114_reserved:
+ * PPS 114 - 117 - reserved
+ */
+ u32 pps_long_114_reserved;
+ /**
+ * @pps_long_118_reserved:
+ * PPS 118 - 121 - reserved
+ */
+ u32 pps_long_118_reserved;
+ /**
+ * @pps_long_122_reserved:
+ * PPS 122- 125 - reserved
+ */
+ u32 pps_long_122_reserved;
+ /**
+ * @pps_short_126_reserved:
+ * PPS 126, 127 - reserved
+ */
+ __be16 pps_short_126_reserved;
+} __packed;
+
+/**
+ * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter
+ * Set Metadata
+ *
+ * This structure represents the DSC PPS infoframe required to send the Picture
+ * Parameter Set metadata required before enabling VESA Display Stream
+ * Compression. This is based on the DP Secondary Data Packet structure and
+ * comprises of SDP Header as defined &struct dp_sdp_header in drm_dp_helper.h
+ * and PPS payload defined in &struct drm_dsc_picture_parameter_set.
+ *
+ * @pps_header: Header for PPS as per DP SDP header format of type
+ * &struct dp_sdp_header
+ * @pps_payload: PPS payload fields as per DSC specification Table 4-1
+ * as represented in &struct drm_dsc_picture_parameter_set
+ */
+struct drm_dsc_pps_infoframe {
+ struct dp_sdp_header pps_header;
+ struct drm_dsc_picture_parameter_set pps_payload;
+} __packed;
+
+#endif /* _DRM_DSC_H_ */
--- /dev/null
+/* SPDX-License-Identifier: MIT
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * Authors:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ */
+
+#ifndef DRM_DSC_HELPER_H_
+#define DRM_DSC_HELPER_H_
+
+#include <drm/display/drm_dsc.h>
+
+void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
+int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
+void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
+ const struct drm_dsc_config *dsc_cfg);
+int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
+
+#endif /* _DRM_DSC_HELPER_H_ */
+
+++ /dev/null
-/* SPDX-License-Identifier: MIT
- * Copyright (C) 2018 Intel Corp.
- *
- * Authors:
- * Manasi Navare <manasi.d.navare@intel.com>
- */
-
-#ifndef DRM_DSC_H_
-#define DRM_DSC_H_
-
-#include <drm/display/drm_dp_helper.h>
-
-/* VESA Display Stream Compression DSC 1.2 constants */
-#define DSC_NUM_BUF_RANGES 15
-#define DSC_MUX_WORD_SIZE_8_10_BPC 48
-#define DSC_MUX_WORD_SIZE_12_BPC 64
-#define DSC_RC_PIXELS_PER_GROUP 3
-#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
-#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
-
-/* DSC Rate Control Constants */
-#define DSC_RC_MODEL_SIZE_CONST 8192
-#define DSC_RC_EDGE_FACTOR_CONST 6
-#define DSC_RC_TGT_OFFSET_HI_CONST 3
-#define DSC_RC_TGT_OFFSET_LO_CONST 3
-
-/* DSC PPS constants and macros */
-#define DSC_PPS_VERSION_MAJOR_SHIFT 4
-#define DSC_PPS_BPC_SHIFT 4
-#define DSC_PPS_MSB_SHIFT 8
-#define DSC_PPS_LSB_MASK (0xFF << 0)
-#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8)
-#define DSC_PPS_VBR_EN_SHIFT 2
-#define DSC_PPS_SIMPLE422_SHIFT 3
-#define DSC_PPS_CONVERT_RGB_SHIFT 4
-#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5
-#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8)
-#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8)
-#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4
-#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
-#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
-#define DSC_PPS_NATIVE_420_SHIFT 1
-#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
-#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
-#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
-
-/**
- * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
- *
- * This defines different rate control parameters used by the DSC engine
- * to compress the frame.
- */
-struct drm_dsc_rc_range_parameters {
- /**
- * @range_min_qp: Min Quantization Parameters allowed for this range
- */
- u8 range_min_qp;
- /**
- * @range_max_qp: Max Quantization Parameters allowed for this range
- */
- u8 range_max_qp;
- /**
- * @range_bpg_offset:
- * Bits/group offset to apply to target for this group
- */
- u8 range_bpg_offset;
-};
-
-/**
- * struct drm_dsc_config - Parameters required to configure DSC
- *
- * Driver populates this structure with all the parameters required
- * to configure the display stream compression on the source.
- */
-struct drm_dsc_config {
- /**
- * @line_buf_depth:
- * Bits per component for previous reconstructed line buffer
- */
- u8 line_buf_depth;
- /**
- * @bits_per_component: Bits per component to code (8/10/12)
- */
- u8 bits_per_component;
- /**
- * @convert_rgb:
- * Flag to indicate if RGB - YCoCg conversion is needed
- * True if RGB input, False if YCoCg input
- */
- bool convert_rgb;
- /**
- * @slice_count: Number fo slices per line used by the DSC encoder
- */
- u8 slice_count;
- /**
- * @slice_width: Width of each slice in pixels
- */
- u16 slice_width;
- /**
- * @slice_height: Slice height in pixels
- */
- u16 slice_height;
- /**
- * @simple_422: True if simple 4_2_2 mode is enabled else False
- */
- bool simple_422;
- /**
- * @pic_width: Width of the input display frame in pixels
- */
- u16 pic_width;
- /**
- * @pic_height: Vertical height of the input display frame
- */
- u16 pic_height;
- /**
- * @rc_tgt_offset_high:
- * Offset to bits/group used by RC to determine QP adjustment
- */
- u8 rc_tgt_offset_high;
- /**
- * @rc_tgt_offset_low:
- * Offset to bits/group used by RC to determine QP adjustment
- */
- u8 rc_tgt_offset_low;
- /**
- * @bits_per_pixel:
- * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
- */
- u16 bits_per_pixel;
- /**
- * @rc_edge_factor:
- * Factor to determine if an edge is present based on the bits produced
- */
- u8 rc_edge_factor;
- /**
- * @rc_quant_incr_limit1:
- * Slow down incrementing once the range reaches this value
- */
- u8 rc_quant_incr_limit1;
- /**
- * @rc_quant_incr_limit0:
- * Slow down incrementing once the range reaches this value
- */
- u8 rc_quant_incr_limit0;
- /**
- * @initial_xmit_delay:
- * Number of pixels to delay the initial transmission
- */
- u16 initial_xmit_delay;
- /**
- * @initial_dec_delay:
- * Initial decoder delay, number of pixel times that the decoder
- * accumulates data in its rate buffer before starting to decode
- * and output pixels.
- */
- u16 initial_dec_delay;
- /**
- * @block_pred_enable:
- * True if block prediction is used to code any groups within the
- * picture. False if BP not used
- */
- bool block_pred_enable;
- /**
- * @first_line_bpg_offset:
- * Number of additional bits allocated for each group on the first
- * line of slice.
- */
- u8 first_line_bpg_offset;
- /**
- * @initial_offset: Value to use for RC model offset at slice start
- */
- u16 initial_offset;
- /**
- * @rc_buf_thresh: Thresholds defining each of the buffer ranges
- */
- u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
- /**
- * @rc_range_params:
- * Parameters for each of the RC ranges defined in
- * &struct drm_dsc_rc_range_parameters
- */
- struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
- /**
- * @rc_model_size: Total size of RC model
- */
- u16 rc_model_size;
- /**
- * @flatness_min_qp: Minimum QP where flatness information is sent
- */
- u8 flatness_min_qp;
- /**
- * @flatness_max_qp: Maximum QP where flatness information is sent
- */
- u8 flatness_max_qp;
- /**
- * @initial_scale_value: Initial value for the scale factor
- */
- u8 initial_scale_value;
- /**
- * @scale_decrement_interval:
- * Specifies number of group times between decrementing the scale factor
- * at beginning of a slice.
- */
- u16 scale_decrement_interval;
- /**
- * @scale_increment_interval:
- * Number of group times between incrementing the scale factor value
- * used at the beginning of a slice.
- */
- u16 scale_increment_interval;
- /**
- * @nfl_bpg_offset: Non first line BPG offset to be used
- */
- u16 nfl_bpg_offset;
- /**
- * @slice_bpg_offset: BPG offset used to enforce slice bit
- */
- u16 slice_bpg_offset;
- /**
- * @final_offset: Final RC linear transformation offset value
- */
- u16 final_offset;
- /**
- * @vbr_enable: True if VBR mode is enabled, false if disabled
- */
- bool vbr_enable;
- /**
- * @mux_word_size: Mux word size (in bits) for SSM mode
- */
- u8 mux_word_size;
- /**
- * @slice_chunk_size:
- * The (max) size in bytes of the "chunks" that are used in slice
- * multiplexing.
- */
- u16 slice_chunk_size;
- /**
- * @rc_bits: Rate control buffer size in bits
- */
- u16 rc_bits;
- /**
- * @dsc_version_minor: DSC minor version
- */
- u8 dsc_version_minor;
- /**
- * @dsc_version_major: DSC major version
- */
- u8 dsc_version_major;
- /**
- * @native_422: True if Native 4:2:2 supported, else false
- */
- bool native_422;
- /**
- * @native_420: True if Native 4:2:0 supported else false.
- */
- bool native_420;
- /**
- * @second_line_bpg_offset:
- * Additional bits/grp for seconnd line of slice for native 4:2:0
- */
- u8 second_line_bpg_offset;
- /**
- * @nsl_bpg_offset:
- * Num of bits deallocated for each grp that is not in second line of
- * slice
- */
- u16 nsl_bpg_offset;
- /**
- * @second_line_offset_adj:
- * Offset adjustment for second line in Native 4:2:0 mode
- */
- u16 second_line_offset_adj;
-};
-
-/**
- * struct drm_dsc_picture_parameter_set - Represents 128 bytes of
- * Picture Parameter Set
- *
- * The VESA DSC standard defines picture parameter set (PPS) which display
- * stream compression encoders must communicate to decoders.
- * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in
- * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
- * The PPS fields that span over more than a byte should be stored in Big Endian
- * format.
- */
-struct drm_dsc_picture_parameter_set {
- /**
- * @dsc_version:
- * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
- * PPS0[7:4] - dsc_version_major: Contains major version of DSC
- */
- u8 dsc_version;
- /**
- * @pps_identifier:
- * PPS1[7:0] - Application specific identifier that can be
- * used to differentiate between different PPS tables.
- */
- u8 pps_identifier;
- /**
- * @pps_reserved:
- * PPS2[7:0]- RESERVED Byte
- */
- u8 pps_reserved;
- /**
- * @pps_3:
- * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
- * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
- * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
- * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
- * PPS3[7:4] - bits_per_component: Bits per component for the original
- * pixels of the encoded picture.
- * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
- * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
- * allowed only when dsc_minor_version = 0x2)
- */
- u8 pps_3;
- /**
- * @pps_4:
- * PPS4[1:0] -These are the most significant 2 bits of
- * compressed BPP bits_per_pixel[9:0] syntax element.
- * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
- * PPS4[3] - simple_422: Indicates if decoder drops samples to
- * reconstruct the 4:2:2 picture.
- * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
- * active.
- * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
- * groups in picture
- * PPS4[7:6] - Reseved bits
- */
- u8 pps_4;
- /**
- * @bits_per_pixel_low:
- * PPS5[7:0] - This indicates the lower significant 8 bits of
- * the compressed BPP bits_per_pixel[9:0] element.
- */
- u8 bits_per_pixel_low;
- /**
- * @pic_height:
- * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
- * within the raster.
- */
- __be16 pic_height;
- /**
- * @pic_width:
- * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
- * the raster.
- */
- __be16 pic_width;
- /**
- * @slice_height:
- * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
- */
- __be16 slice_height;
- /**
- * @slice_width:
- * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
- */
- __be16 slice_width;
- /**
- * @chunk_size:
- * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
- * that are used for slice multiplexing.
- */
- __be16 chunk_size;
- /**
- * @initial_xmit_delay_high:
- * PPS16[1:0] - Most Significant two bits of initial transmission delay.
- * It specifies the number of pixel times that the encoder waits before
- * transmitting data from its rate buffer.
- * PPS16[7:2] - Reserved
- */
- u8 initial_xmit_delay_high;
- /**
- * @initial_xmit_delay_low:
- * PPS17[7:0] - Least significant 8 bits of initial transmission delay.
- */
- u8 initial_xmit_delay_low;
- /**
- * @initial_dec_delay:
- *
- * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
- * of pixel times that the decoder accumulates data in its rate buffer
- * before starting to decode and output pixels.
- */
- __be16 initial_dec_delay;
- /**
- * @pps20_reserved:
- *
- * PPS20[7:0] - Reserved
- */
- u8 pps20_reserved;
- /**
- * @initial_scale_value:
- * PPS21[5:0] - Initial rcXformScale factor used at beginning
- * of a slice.
- * PPS21[7:6] - Reserved
- */
- u8 initial_scale_value;
- /**
- * @scale_increment_interval:
- * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
- * the rcXformScale factor at end of a slice.
- */
- __be16 scale_increment_interval;
- /**
- * @scale_decrement_interval_high:
- * PPS24[3:0] - Higher 4 bits indicating number of group times between
- * decrementing the rcXformScale factor at beginning of a slice.
- * PPS24[7:4] - Reserved
- */
- u8 scale_decrement_interval_high;
- /**
- * @scale_decrement_interval_low:
- * PPS25[7:0] - Lower 8 bits of scale decrement interval
- */
- u8 scale_decrement_interval_low;
- /**
- * @pps26_reserved:
- * PPS26[7:0]
- */
- u8 pps26_reserved;
- /**
- * @first_line_bpg_offset:
- * PPS27[4:0] - Number of additional bits that are allocated
- * for each group on first line of a slice.
- * PPS27[7:5] - Reserved
- */
- u8 first_line_bpg_offset;
- /**
- * @nfl_bpg_offset:
- * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
- * deallocated for each group for groups after the first line of slice.
- */
- __be16 nfl_bpg_offset;
- /**
- * @slice_bpg_offset:
- * PPS30, PPS31[7:0] - Number of bits that are deallocated for each
- * group to enforce the slice constraint.
- */
- __be16 slice_bpg_offset;
- /**
- * @initial_offset:
- * PPS32,33[7:0] - Initial value for rcXformOffset
- */
- __be16 initial_offset;
- /**
- * @final_offset:
- * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
- */
- __be16 final_offset;
- /**
- * @flatness_min_qp:
- * PPS36[4:0] - Minimum QP at which flatness is signaled and
- * flatness QP adjustment is made.
- * PPS36[7:5] - Reserved
- */
- u8 flatness_min_qp;
- /**
- * @flatness_max_qp:
- * PPS37[4:0] - Max QP at which flatness is signalled and
- * the flatness adjustment is made.
- * PPS37[7:5] - Reserved
- */
- u8 flatness_max_qp;
- /**
- * @rc_model_size:
- * PPS38,39[7:0] - Number of bits within RC Model.
- */
- __be16 rc_model_size;
- /**
- * @rc_edge_factor:
- * PPS40[3:0] - Ratio of current activity vs, previous
- * activity to determine presence of edge.
- * PPS40[7:4] - Reserved
- */
- u8 rc_edge_factor;
- /**
- * @rc_quant_incr_limit0:
- * PPS41[4:0] - QP threshold used in short term RC
- * PPS41[7:5] - Reserved
- */
- u8 rc_quant_incr_limit0;
- /**
- * @rc_quant_incr_limit1:
- * PPS42[4:0] - QP threshold used in short term RC
- * PPS42[7:5] - Reserved
- */
- u8 rc_quant_incr_limit1;
- /**
- * @rc_tgt_offset:
- * PPS43[3:0] - Lower end of the variability range around the target
- * bits per group that is allowed by short term RC.
- * PPS43[7:4]- Upper end of the variability range around the target
- * bits per group that i allowed by short term rc.
- */
- u8 rc_tgt_offset;
- /**
- * @rc_buf_thresh:
- * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
- * the 15 ranges defined by 14 thresholds.
- */
- u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
- /**
- * @rc_range_parameters:
- * PPS58[7:0] - PPS87[7:0]
- * Parameters that correspond to each of the 15 ranges.
- */
- __be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
- /**
- * @native_422_420:
- * PPS88[0] - 0 = Native 4:2:2 not used
- * 1 = Native 4:2:2 used
- * PPS88[1] - 0 = Native 4:2:0 not use
- * 1 = Native 4:2:0 used
- * PPS88[7:2] - Reserved 6 bits
- */
- u8 native_422_420;
- /**
- * @second_line_bpg_offset:
- * PPS89[4:0] - Additional bits/group budget for the
- * second line of a slice in Native 4:2:0 mode.
- * Set to 0 if DSC minor version is 1 or native420 is 0.
- * PPS89[7:5] - Reserved
- */
- u8 second_line_bpg_offset;
- /**
- * @nsl_bpg_offset:
- * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
- * for each group that is not in the second line of a slice.
- */
- __be16 nsl_bpg_offset;
- /**
- * @second_line_offset_adj:
- * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
- * line in Native 4:2:0 mode.
- */
- __be16 second_line_offset_adj;
- /**
- * @pps_long_94_reserved:
- * PPS 94, 95, 96, 97 - Reserved
- */
- u32 pps_long_94_reserved;
- /**
- * @pps_long_98_reserved:
- * PPS 98, 99, 100, 101 - Reserved
- */
- u32 pps_long_98_reserved;
- /**
- * @pps_long_102_reserved:
- * PPS 102, 103, 104, 105 - Reserved
- */
- u32 pps_long_102_reserved;
- /**
- * @pps_long_106_reserved:
- * PPS 106, 107, 108, 109 - reserved
- */
- u32 pps_long_106_reserved;
- /**
- * @pps_long_110_reserved:
- * PPS 110, 111, 112, 113 - reserved
- */
- u32 pps_long_110_reserved;
- /**
- * @pps_long_114_reserved:
- * PPS 114 - 117 - reserved
- */
- u32 pps_long_114_reserved;
- /**
- * @pps_long_118_reserved:
- * PPS 118 - 121 - reserved
- */
- u32 pps_long_118_reserved;
- /**
- * @pps_long_122_reserved:
- * PPS 122- 125 - reserved
- */
- u32 pps_long_122_reserved;
- /**
- * @pps_short_126_reserved:
- * PPS 126, 127 - reserved
- */
- __be16 pps_short_126_reserved;
-} __packed;
-
-/**
- * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter
- * Set Metadata
- *
- * This structure represents the DSC PPS infoframe required to send the Picture
- * Parameter Set metadata required before enabling VESA Display Stream
- * Compression. This is based on the DP Secondary Data Packet structure and
- * comprises of SDP Header as defined &struct dp_sdp_header in drm_dp_helper.h
- * and PPS payload defined in &struct drm_dsc_picture_parameter_set.
- *
- * @pps_header: Header for PPS as per DP SDP header format of type
- * &struct dp_sdp_header
- * @pps_payload: PPS payload fields as per DSC specification Table 4-1
- * as represented in &struct drm_dsc_picture_parameter_set
- */
-struct drm_dsc_pps_infoframe {
- struct dp_sdp_header pps_header;
- struct drm_dsc_picture_parameter_set pps_payload;
-} __packed;
-
-void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
-int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
-void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
- const struct drm_dsc_config *dsc_cfg);
-int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
-
-#endif /* _DRM_DSC_H_ */
projects / linux-2.6-microblaze.git / commitdiff