* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, amd: Use kmalloc_node(,__GFP_ZERO) for northbridge structure allocation
perf_events: Fix time tracking in samples
perf trace: update usage
perf trace: update Documentation with new perf trace variants
perf trace: live-mode command-line cleanup
perf trace record: handle commands correctly
perf record: make the record options available outside perf record
perf trace scripting: remove system-wide param from shell scripts
perf trace scripting: fix some small memory leaks and missing error checks
perf: Fix usages of profile_cpu in builtin-top.c to use cpu_list
perf, ui: Eliminate stack-smashing protection compiler complaint
--- /dev/null
+What: /proc/<pid>/oom_adj
+When: August 2012
+Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
+ badness heuristic used to determine which task to kill when the kernel
+ is out of memory.
+
+ The badness heuristic has since been rewritten since the introduction of
+ this tunable such that its meaning is deprecated. The value was
+ implemented as a bitshift on a score generated by the badness()
+ function that did not have any precise units of measure. With the
+ rewrite, the score is given as a proportion of available memory to the
+ task allocating pages, so using a bitshift which grows the score
+ exponentially is, thus, impossible to tune with fine granularity.
+
+ A much more powerful interface, /proc/<pid>/oom_score_adj, was
+ introduced with the oom killer rewrite that allows users to increase or
+ decrease the badness() score linearly. This interface will replace
+ /proc/<pid>/oom_adj.
+
+ A warning will be emitted to the kernel log if an application uses this
+ deprecated interface. After it is printed once, future warnings will be
+ suppressed until the kernel is rebooted.
Roadmap:
-2.6.37 Remove experimental tag from mount option
- => should be roughly 6 months after initial merge
- => enough time to:
- => gain confidence and fix problems reported by early
- adopters (a.k.a. guinea pigs)
- => address worst performance regressions and undesired
- behaviours
- => start tuning/optimising code for parallelism
- => start tuning/optimising algorithms consuming
- excessive CPU time
-
2.6.39 Switch default mount option to use delayed logging
=> should be roughly 12 months after initial merge
=> enough time to shake out remaining problems before next round of
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
Setting the brightness to zero with brightness_set() callback function
should completely turn off the LED and cancel the previously programmed
--- /dev/null
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ }, {
+ .chan_nr = 1,
+ .led_current = 0,
+ .max_current = 130,
+ }, {
+ .chan_nr = 2,
+ .led_current = 0,
+ .max_current = 130,
+ }
+};
+
+static int lp5521_setup(void)
+{
+ /* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+ /* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_EXT,
+ .setup_resources = lp5521_setup,
+ .release_resources = lp5521_release,
+ .enable = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
--- /dev/null
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ },
+...
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ .max_current = 130,
+ }
+};
+
+static int lp5523_setup(void)
+{
+ /* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+ /* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+ .led_config = lp5523_led_config,
+ .num_channels = ARRAY_SIZE(lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_EXT,
+ .setup_resources = lp5523_setup,
+ .release_resources = lp5523_release,
+ .enable = lp5523_enable,
+};
- core_uses_pid
- ctrl-alt-del
- dentry-state
+- dmesg_restrict
- domainname
- hostname
- hotplug
==============================================================
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer. When
+dmesg_restrict is set to (0) there are no restrictions. When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
domainname & hostname:
These files can be used to set the NIS/YP domainname and the
struct task_struct;
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
- long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
extern int get_fpregs(struct user_i387_struct __user *buf,
break;
case PTRACE_SET_THREAD_AREA:
- ret = ptrace_set_thread_area(child, addr, datavp);
+ ret = ptrace_set_thread_area(child, addr, vp);
break;
case PTRACE_FAULTINFO: {
static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
{
- kobject_put(&pcrypt->pinst->kobj);
free_cpumask_var(pcrypt->cb_cpumask->mask);
kfree(pcrypt->cb_cpumask);
unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
u32 pte_flags;
- if (type_mask == AGP_USER_UNCACHED_MEMORY)
+ if (type_mask == AGP_USER_MEMORY)
pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
- pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
} else { /* set 'normal'/'cached' to LLC by default */
- pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
}
struct drm_crtc *tmp;
int crtc_mask = 1;
- WARN(!crtc, "checking null crtc?");
+ WARN(!crtc, "checking null crtc?\n");
dev = crtc->dev;
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
- .buf = buf + start,
+ .buf = buf,
}
};
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
- int i, j = 0;
+ int i, j = 0, valid_extensions = 0;
u8 *block, *new;
if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
for (j = 1; j <= block[0x7e]; j++) {
for (i = 0; i < 4; i++) {
- if (drm_do_probe_ddc_edid(adapter, block, j,
- EDID_LENGTH))
+ if (drm_do_probe_ddc_edid(adapter,
+ block + (valid_extensions + 1) * EDID_LENGTH,
+ j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + j * EDID_LENGTH))
+ if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+ valid_extensions++;
break;
+ }
}
if (i == 4)
- goto carp;
+ dev_warn(connector->dev->dev,
+ "%s: Ignoring invalid EDID block %d.\n",
+ drm_get_connector_name(connector), j);
+ }
+
+ if (valid_extensions != block[0x7e]) {
+ block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+ block[0x7e] = valid_extensions;
+ new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+ if (!new)
+ goto out;
+ block = new;
}
return block;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
-module_param_named(powersave, i915_powersave, int, 0400);
+module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
static int i915_ring_idle(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
- if (list_empty(&ring->gpu_write_list))
+ if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
i915_gem_flush_ring(dev, NULL, ring,
int ret;
lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return 0;
* write domain
*/
if (obj->write_domain &&
- obj->write_domain != obj->pending_read_domains) {
+ (obj->write_domain != obj->pending_read_domains ||
+ obj_priv->ring != ring)) {
flush_domains |= obj->write_domain;
invalidate_domains |=
obj->pending_read_domains & ~obj->write_domain;
return 0;
}
+static int
+i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
+ struct drm_file *file,
+ struct intel_ring_buffer *ring,
+ struct drm_gem_object **objects,
+ int count)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret, i;
+
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+ dev_priv->mm.flush_rings = 0;
+ for (i = 0; i < count; i++)
+ i915_gem_object_set_to_gpu_domain(objects[i], ring);
+
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev, file,
+ dev->invalidate_domains,
+ dev->flush_domains,
+ dev_priv->mm.flush_rings);
+ }
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
+ /* XXX replace with semaphores */
+ if (obj->ring && ring != obj->ring) {
+ ret = i915_gem_object_wait_rendering(&obj->base, true);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
goto err;
}
- /* Zero the global flush/invalidate flags. These
- * will be modified as new domains are computed
- * for each object
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- dev_priv->mm.flush_rings = 0;
-
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_gem_object *obj = object_list[i];
-
- /* Compute new gpu domains and update invalidate/flush */
- i915_gem_object_set_to_gpu_domain(obj, ring);
- }
-
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev, file,
- dev->invalidate_domains,
- dev->flush_domains,
- dev_priv->mm.flush_rings);
- }
+ ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
+ object_list, args->buffer_count);
+ if (ret)
+ goto err;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
alignment = i915_gem_get_gtt_alignment(obj);
if (obj_priv->gtt_offset & (alignment - 1)) {
WARN(obj_priv->pin_count,
- "bo is already pinned with incorrect alignment:"
- " offset=%x, req.alignment=%x\n",
+ "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
obj_priv->gtt_offset, alignment);
ret = i915_gem_object_unbind(obj);
if (ret)
struct drm_file *file_priv)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
- void *obj_addr;
- int ret;
- char __user *user_data;
+ void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
- user_data = (char __user *) (uintptr_t) args->data_ptr;
- obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
- DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
- ret = copy_from_user(obj_addr, user_data, args->size);
- if (ret)
- return -EFAULT;
+ if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+ unsigned long unwritten;
+
+ /* The physical object once assigned is fixed for the lifetime
+ * of the obj, so we can safely drop the lock and continue
+ * to access vaddr.
+ */
+ mutex_unlock(&dev->struct_mutex);
+ unwritten = copy_from_user(vaddr, user_data, args->size);
+ mutex_lock(&dev->struct_mutex);
+ if (unwritten)
+ return -EFAULT;
+ }
drm_agp_chipset_flush(dev);
return 0;
int lists_empty;
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list);
+ list_empty(&dev_priv->mm.active_list);
return !lists_empty;
}
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return -ENOSPC;
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
BUG_ON(!lists_empty);
return 0;
/* Clock gating state */
intel_init_clock_gating(dev);
- if (HAS_PCH_SPLIT(dev))
+ if (HAS_PCH_SPLIT(dev)) {
ironlake_enable_drps(dev);
+ intel_init_emon(dev);
+ }
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
udelay(500);
}
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* enable normal train */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE;
+ }
+ I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+ /* wait one idle pattern time */
+ POSTING_READ(reg);
+ udelay(1000);
+}
+
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
DRM_DEBUG_KMS("FDI train done\n");
- /* enable normal train */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_NORMAL_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE;
- }
- I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
- /* wait one idle pattern time */
- POSTING_READ(reg);
- udelay(1000);
}
static const int const snb_b_fdi_train_param [] = {
I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
+ intel_fdi_normal_train(crtc);
+
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
udelay(100);
/* Ironlake workaround, disable clock pointer after downing FDI */
- I915_WRITE(FDI_RX_CHICKEN(pipe),
- I915_READ(FDI_RX_CHICKEN(pipe) &
- ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
/* still set train pattern 1 */
reg = FDI_TX_CTL(pipe);
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
- fstart = fmax;
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
- dev_priv->fmax = fstart; /* IPS callback will increase this */
+ dev_priv->fmax = fmax; /* IPS callback will increase this */
dev_priv->fstart = fstart;
- dev_priv->max_delay = fmax;
+ dev_priv->max_delay = fstart;
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
- DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
- fstart);
+ DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+ fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
status = connector_status_connected;
}
- return bit;
+ return status;
}
/**
extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_gem_object *obj,
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
- if (intel_lvds->edid) {
- drm_mode_connector_update_edid_property(connector,
- intel_lvds->edid);
+ if (intel_lvds->edid)
return drm_add_edid_modes(connector, intel_lvds->edid);
- }
mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
if (mode == 0)
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
-
+ if (intel_lvds->edid) {
+ if (drm_add_edid_modes(connector,
+ intel_lvds->edid)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_lvds->edid);
+ } else {
+ kfree(intel_lvds->edid);
+ intel_lvds->edid = NULL;
+ }
+ }
if (!intel_lvds->edid) {
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
return 0;
err_out:
- iounmap(opregion->header);
+ iounmap(base);
return err;
}
{
int uv_hscale = uv_hsubsampling(rec->flags);
int uv_vscale = uv_vsubsampling(rec->flags);
- u32 stride_mask, depth, tmp;
+ u32 stride_mask;
+ int depth;
+ u32 tmp;
/* check src dimensions */
if (IS_845G(dev) || IS_I830(dev)) {
I915_WRITE_CTL(ring,
((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_NO_REPORT | RING_VALID);
+ | RING_REPORT_64K | RING_VALID);
head = I915_READ_HEAD(ring) & HEAD_ADDR;
/* If the head is still not zero, the ring is dead */
i915_gem_object_unpin(ring->gem_object);
drm_gem_object_unreference(ring->gem_object);
ring->gem_object = NULL;
+
+ if (ring->cleanup)
+ ring->cleanup(ring);
+
cleanup_status_page(dev, ring);
}
{
unsigned long end;
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 head;
+
+ head = intel_read_status_page(ring, 4);
+ if (head) {
+ ring->head = head & HEAD_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ if (ring->space >= n)
+ return 0;
+ }
trace_i915_ring_wait_begin (dev);
end = jiffies + 3 * HZ;
/* do nothing */
}
+
+/* Workaround for some stepping of SNB,
+ * each time when BLT engine ring tail moved,
+ * the first command in the ring to be parsed
+ * should be MI_BATCH_BUFFER_START
+ */
+#define NEED_BLT_WORKAROUND(dev) \
+ (IS_GEN6(dev) && (dev->pdev->revision < 8))
+
+static inline struct drm_i915_gem_object *
+to_blt_workaround(struct intel_ring_buffer *ring)
+{
+ return ring->private;
+}
+
+static int blt_ring_init(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ if (NEED_BLT_WORKAROUND(dev)) {
+ struct drm_i915_gem_object *obj;
+ u32 __iomem *ptr;
+ int ret;
+
+ obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
+ if (obj == NULL)
+ return -ENOMEM;
+
+ ret = i915_gem_object_pin(&obj->base, 4096);
+ if (ret) {
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ptr = kmap(obj->pages[0]);
+ iowrite32(MI_BATCH_BUFFER_END, ptr);
+ iowrite32(MI_NOOP, ptr+1);
+ kunmap(obj->pages[0]);
+
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
+ if (ret) {
+ i915_gem_object_unpin(&obj->base);
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ring->private = obj;
+ }
+
+ return init_ring_common(dev, ring);
+}
+
+static void blt_ring_begin(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ int num_dwords)
+{
+ if (ring->private) {
+ intel_ring_begin(dev, ring, num_dwords+2);
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
+ intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
+ } else
+ intel_ring_begin(dev, ring, 4);
+}
+
+static void blt_ring_flush(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
+{
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_FLUSH_DW);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_advance(dev, ring);
+}
+
+static u32
+blt_ring_add_request(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 flush_domains)
+{
+ u32 seqno = i915_gem_get_seqno(dev);
+
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+ intel_ring_emit(dev, ring,
+ I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ intel_ring_emit(dev, ring, seqno);
+ intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+ intel_ring_advance(dev, ring);
+
+ DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+ return seqno;
+}
+
+static void blt_ring_cleanup(struct intel_ring_buffer *ring)
+{
+ if (!ring->private)
+ return;
+
+ i915_gem_object_unpin(ring->private);
+ drm_gem_object_unreference(ring->private);
+ ring->private = NULL;
+}
+
static const struct intel_ring_buffer gen6_blt_ring = {
.name = "blt ring",
.id = RING_BLT,
.mmio_base = BLT_RING_BASE,
.size = 32 * PAGE_SIZE,
- .init = init_ring_common,
+ .init = blt_ring_init,
.write_tail = ring_write_tail,
- .flush = gen6_ring_flush,
- .add_request = ring_add_request,
+ .flush = blt_ring_flush,
+ .add_request = blt_ring_add_request,
.get_seqno = ring_status_page_get_seqno,
.user_irq_get = blt_ring_get_user_irq,
.user_irq_put = blt_ring_put_user_irq,
.dispatch_gem_execbuffer = gen6_ring_dispatch_gem_execbuffer,
+ .cleanup = blt_ring_cleanup,
};
int intel_init_render_ring_buffer(struct drm_device *dev)
struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset);
+ void (*cleanup)(struct intel_ring_buffer *ring);
/**
* List of objects currently involved in rendering from the
wait_queue_head_t irq_queue;
drm_local_map_t map;
+
+ void *private;
};
static inline u32
u32 grbm_int_cntl = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
case 0: /* D1 vblank */
if (disp_int & LB_D1_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D1_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D1 vblank\n");
case 0: /* D2 vblank */
if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D2 vblank\n");
case 0: /* D3 vblank */
if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 2);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D3 vblank\n");
case 0: /* D4 vblank */
if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 3);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D4 vblank\n");
case 0: /* D5 vblank */
if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 4);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D5 vblank\n");
case 0: /* D6 vblank */
if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 5);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D6 vblank\n");
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "R100 PCI GART already initialized.\n");
+ WARN(1, "R100 PCI GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
uint32_t tmp = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RV370 PCIE GART already initialized.\n");
+ WARN(1, "RV370 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
{
u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
- u32 actual_temp = 0;
- if ((temp >> 7) & 1)
- actual_temp = 0;
- else
- actual_temp = (temp >> 1) & 0xff;
-
- return actual_temp * 1000;
+ return temp * 1000;
}
void r600_pm_get_dynpm_state(struct radeon_device *rdev)
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "R600 PCIE GART already initialized.\n");
+ WARN(1, "R600 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
u32 hdmi1, hdmi2;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
if (crev < 2)
return false;
- router.valid = false;
-
obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
(ctx->bios + data_offset +
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
continue;
+ router.ddc_valid = false;
+ router.cd_valid = false;
for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
usDeviceTag));
} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
- router.valid = false;
for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
- u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+ u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID);
if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
(ctx->bios + data_offset +
ATOM_I2C_RECORD *i2c_record;
ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+ ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path;
ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
(ctx->bios + data_offset +
case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
record;
- router.valid = true;
- router.mux_type = ddc_path->ucMuxType;
- router.mux_control_pin = ddc_path->ucMuxControlPin;
- router.mux_state = ddc_path->ucMuxState[enum_id];
+ router.ddc_valid = true;
+ router.ddc_mux_type = ddc_path->ucMuxType;
+ router.ddc_mux_control_pin = ddc_path->ucMuxControlPin;
+ router.ddc_mux_state = ddc_path->ucMuxState[enum_id];
+ break;
+ case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE:
+ cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *)
+ record;
+ router.cd_valid = true;
+ router.cd_mux_type = cd_path->ucMuxType;
+ router.cd_mux_control_pin = cd_path->ucMuxControlPin;
+ router.cd_mux_state = cd_path->ucMuxState[enum_id];
break;
}
record = (ATOM_COMMON_RECORD_HEADER *)
size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
struct radeon_router router;
- router.valid = false;
+ router.ddc_valid = false;
+ router.cd_valid = false;
bios_connectors = kzalloc(bc_size, GFP_KERNEL);
if (!bios_connectors)
continue;
if (priority == true) {
- DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector));
conflict->status = connector_status_disconnected;
radeon_connector_update_scratch_regs(conflict, connector_status_disconnected);
} else {
- DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict));
current_status = connector_status_disconnected;
}
break;
mode->vdisplay == native_mode->vdisplay) {
*native_mode = *mode;
drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
- DRM_INFO("Determined LVDS native mode details from EDID\n");
+ DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n");
break;
}
}
}
if (!native_mode->clock) {
- DRM_INFO("No LVDS native mode details, disabling RMX\n");
+ DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n");
radeon_encoder->rmx_type = RMX_OFF;
}
}
radeon_connector->shared_ddc = true;
shared_ddc = true;
}
- if (radeon_connector->router_bus && router->valid &&
+ if (radeon_connector->router_bus && router->ddc_valid &&
(radeon_connector->router.router_id == router->router_id)) {
radeon_connector->shared_ddc = false;
shared_ddc = false;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
radeon_connector->router = *router;
- if (router->valid) {
+ if (router->ddc_valid || router->cd_valid) {
radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
if (!radeon_connector->router_bus)
goto failed;
radeon_connector->ddc_bus->rec.en_data_reg,
radeon_connector->ddc_bus->rec.y_clk_reg,
radeon_connector->ddc_bus->rec.y_data_reg);
- if (radeon_connector->router_bus)
+ if (radeon_connector->router.ddc_valid)
DRM_INFO(" DDC Router 0x%x/0x%x\n",
- radeon_connector->router.mux_control_pin,
- radeon_connector->router.mux_state);
+ radeon_connector->router.ddc_mux_control_pin,
+ radeon_connector->router.ddc_mux_state);
+ if (radeon_connector->router.cd_valid)
+ DRM_INFO(" Clock/Data Router 0x%x/0x%x\n",
+ radeon_connector->router.cd_mux_control_pin,
+ radeon_connector->router.cd_mux_state);
} else {
if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if (!radeon_connector->ddc_bus)
return -1;
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (radeon_encoder->active_device &
(ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
radeon_atom_output_lock(encoder, true);
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+ /* select the clock/data port if it uses a router */
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ if (radeon_connector->router.cd_valid)
+ radeon_router_select_cd_port(radeon_connector);
+ }
+
/* this is needed for the pll/ss setup to work correctly in some cases */
atombios_set_encoder_crtc_source(encoder);
}
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig;
+
+ /* check for pre-DCE3 cards with shared encoders;
+ * can't really use the links individually, so don't disable
+ * the encoder if it's in use by another connector
+ */
+ if (!ASIC_IS_DCE3(rdev)) {
+ struct drm_encoder *other_encoder;
+ struct radeon_encoder *other_radeon_encoder;
+
+ list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+ other_radeon_encoder = to_radeon_encoder(other_encoder);
+ if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+ drm_helper_encoder_in_use(other_encoder))
+ goto disable_done;
+ }
+ }
+
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
switch (radeon_encoder->encoder_id) {
break;
}
+disable_done:
if (radeon_encoder_is_digital(encoder)) {
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
r600_hdmi_disable(encoder);
*/
if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
/* good news we believe it's a lockup */
- WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq);
+ WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+ fence->seq, seq);
/* FIXME: what should we do ? marking everyone
* as signaled for now
*/
};
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
if (ret == 2)
addr, val);
}
-/* router switching */
-void radeon_router_select_port(struct radeon_connector *radeon_connector)
+/* ddc router switching */
+void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
{
u8 val;
- if (!radeon_connector->router.valid)
+ if (!radeon_connector->router.ddc_valid)
return;
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, &val);
- val &= radeon_connector->router.mux_control_pin;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, val);
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, &val);
- val &= radeon_connector->router.mux_control_pin;
- val |= radeon_connector->router.mux_state;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
+ val |= radeon_connector->router.ddc_mux_state;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, val);
+}
+
+/* clock/data router switching */
+void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
+{
+ u8 val;
+
+ if (!radeon_connector->router.cd_valid)
+ return;
+
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, val);
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ val |= radeon_connector->router.cd_mux_state;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, val);
};
struct radeon_router {
- bool valid;
u32 router_id;
struct radeon_i2c_bus_rec i2c_info;
u8 i2c_addr;
- u8 mux_type;
- u8 mux_control_pin;
- u8 mux_state;
+ /* i2c mux */
+ bool ddc_valid;
+ u8 ddc_mux_type;
+ u8 ddc_mux_control_pin;
+ u8 ddc_mux_state;
+ /* clock/data mux */
+ bool cd_valid;
+ u8 cd_mux_type;
+ u8 cd_mux_control_pin;
+ u8 cd_mux_state;
};
struct radeon_connector {
u8 slave_addr,
u8 addr,
u8 val);
-extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
type = ttm_bo_type_device;
}
*bo_ptr = NULL;
+
+retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
return -ENOMEM;
bo->gobj = gobj;
bo->surface_reg = -1;
INIT_LIST_HEAD(&bo->list);
-
-retry:
radeon_ttm_placement_from_domain(bo, domain);
/* Kernel allocation are uninterruptible */
mutex_lock(&rdev->vram_mutex);
gtt = container_of(backend, struct radeon_ttm_backend, backend);
gtt->offset = bo_mem->start << PAGE_SHIFT;
if (!gtt->num_pages) {
- WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+ WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
+ gtt->num_pages, bo_mem, backend);
}
r = radeon_gart_bind(gtt->rdev, gtt->offset,
gtt->num_pages, gtt->pages);
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "RS400 GART already initialized.\n");
+ WARN(1, "RS400 GART already initialized\n");
return 0;
}
/* Check gart size */
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RS600 GART already initialized.\n");
+ WARN(1, "RS600 GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
/*
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-/* Notes:
- *
- * We store bo pointer in drm_mm_node struct so we know which bo own a
- * specific node. There is no protection on the pointer, thus to make
- * sure things don't go berserk you have to access this pointer while
- * holding the global lru lock and make sure anytime you free a node you
- * reset the pointer to NULL.
- */
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include <linux/mm.h>
#include <linux/file.h>
#include <linux/module.h>
+#include <asm/atomic.h>
#define TTM_ASSERT_LOCKED(param)
#define TTM_DEBUG(fmt, arg...)
ttm_bo_mem_put(bo, &bo->mem);
atomic_set(&bo->reserved, 0);
+
+ /*
+ * Make processes trying to reserve really pick it up.
+ */
+ smp_mb__after_atomic_dec();
wake_up_all(&bo->event_queue);
}
struct ttm_bo_device *bdev = bo->bdev;
struct ttm_bo_global *glob = bo->glob;
struct ttm_bo_driver *driver;
- void *sync_obj;
+ void *sync_obj = NULL;
void *sync_obj_arg;
int put_count;
int ret;
spin_lock(&glob->lru_lock);
}
queue:
- sync_obj = bo->sync_obj;
- sync_obj_arg = bo->sync_obj_arg;
driver = bdev->driver;
+ if (bo->sync_obj)
+ sync_obj = driver->sync_obj_ref(bo->sync_obj);
+ sync_obj_arg = bo->sync_obj_arg;
kref_get(&bo->list_kref);
list_add_tail(&bo->ddestroy, &bdev->ddestroy);
spin_unlock(&glob->lru_lock);
spin_unlock(&bo->lock);
- if (sync_obj)
+ if (sync_obj) {
driver->sync_obj_flush(sync_obj, sync_obj_arg);
+ driver->sync_obj_unref(&sync_obj);
+ }
schedule_delayed_work(&bdev->wq,
((HZ / 100) < 1) ? 1 : HZ / 100);
}
bool no_wait_gpu)
{
struct ttm_bo_device *bdev = bo->bdev;
- struct ttm_bo_global *glob = bdev->glob;
struct ttm_mem_type_manager *man = &bdev->man[mem_type];
int ret;
return ret;
if (mem->mm_node)
break;
- spin_lock(&glob->lru_lock);
- if (list_empty(&man->lru)) {
- spin_unlock(&glob->lru_lock);
- break;
- }
- spin_unlock(&glob->lru_lock);
ret = ttm_mem_evict_first(bdev, mem_type, interruptible,
no_wait_reserve, no_wait_gpu);
if (unlikely(ret != 0))
int ttm_bo_check_placement(struct ttm_buffer_object *bo,
struct ttm_placement *placement)
{
- int i;
+ BUG_ON((placement->fpfn || placement->lpfn) &&
+ (bo->mem.num_pages > (placement->lpfn - placement->fpfn)));
- if (placement->fpfn || placement->lpfn) {
- if (bo->mem.num_pages > (placement->lpfn - placement->fpfn)) {
- printk(KERN_ERR TTM_PFX "Page number range to small "
- "Need %lu pages, range is [%u, %u]\n",
- bo->mem.num_pages, placement->fpfn,
- placement->lpfn);
- return -EINVAL;
- }
- }
- for (i = 0; i < placement->num_placement; i++) {
- if (!capable(CAP_SYS_ADMIN)) {
- if (placement->placement[i] & TTM_PL_FLAG_NO_EVICT) {
- printk(KERN_ERR TTM_PFX "Need to be root to "
- "modify NO_EVICT status.\n");
- return -EINVAL;
- }
- }
- }
- for (i = 0; i < placement->num_busy_placement; i++) {
- if (!capable(CAP_SYS_ADMIN)) {
- if (placement->busy_placement[i] & TTM_PL_FLAG_NO_EVICT) {
- printk(KERN_ERR TTM_PFX "Need to be root to "
- "modify NO_EVICT status.\n");
- return -EINVAL;
- }
- }
- }
return 0;
}
num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
if (num_pages == 0) {
printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n");
+ if (destroy)
+ (*destroy)(bo);
+ else
+ kfree(bo);
return -EINVAL;
}
bo->destroy = destroy;
int ret = -EINVAL;
struct ttm_mem_type_manager *man;
- if (type >= TTM_NUM_MEM_TYPES) {
- printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type);
- return ret;
- }
-
+ BUG_ON(type >= TTM_NUM_MEM_TYPES);
man = &bdev->man[type];
- if (man->has_type) {
- printk(KERN_ERR TTM_PFX
- "Memory manager already initialized for type %d\n",
- type);
- return ret;
- }
+ BUG_ON(man->has_type);
ret = bdev->driver->init_mem_type(bdev, type, man);
if (ret)
ret = 0;
if (type != TTM_PL_SYSTEM) {
- if (!p_size) {
- printk(KERN_ERR TTM_PFX
- "Zero size memory manager type %d\n",
- type);
- return ret;
- }
-
ret = (*man->func->init)(man, p_size);
if (ret)
return ret;
/**************************************************************************
*
- * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * Copyright (c) 2007-2010 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_placement.h"
-#include <linux/jiffies.h>
+#include "drm_mm.h"
#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/file.h>
+#include <linux/spinlock.h>
#include <linux/module.h>
+/**
+ * Currently we use a spinlock for the lock, but a mutex *may* be
+ * more appropriate to reduce scheduling latency if the range manager
+ * ends up with very fragmented allocation patterns.
+ */
+
+struct ttm_range_manager {
+ struct drm_mm mm;
+ spinlock_t lock;
+};
+
static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
struct ttm_buffer_object *bo,
struct ttm_placement *placement,
struct ttm_mem_reg *mem)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+ struct drm_mm *mm = &rman->mm;
struct drm_mm_node *node = NULL;
unsigned long lpfn;
int ret;
if (unlikely(ret))
return ret;
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
node = drm_mm_search_free_in_range(mm,
mem->num_pages, mem->page_alignment,
placement->fpfn, lpfn, 1);
if (unlikely(node == NULL)) {
- spin_unlock(&glob->lru_lock);
+ spin_unlock(&rman->lock);
return 0;
}
node = drm_mm_get_block_atomic_range(node, mem->num_pages,
- mem->page_alignment,
- placement->fpfn,
- lpfn);
- spin_unlock(&glob->lru_lock);
+ mem->page_alignment,
+ placement->fpfn,
+ lpfn);
+ spin_unlock(&rman->lock);
} while (node == NULL);
mem->mm_node = node;
static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
struct ttm_mem_reg *mem)
{
- struct ttm_bo_global *glob = man->bdev->glob;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
if (mem->mm_node) {
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
drm_mm_put_block(mem->mm_node);
- spin_unlock(&glob->lru_lock);
+ spin_unlock(&rman->lock);
mem->mm_node = NULL;
}
}
static int ttm_bo_man_init(struct ttm_mem_type_manager *man,
unsigned long p_size)
{
- struct drm_mm *mm;
+ struct ttm_range_manager *rman;
int ret;
- mm = kzalloc(sizeof(*mm), GFP_KERNEL);
- if (!mm)
+ rman = kzalloc(sizeof(*rman), GFP_KERNEL);
+ if (!rman)
return -ENOMEM;
- ret = drm_mm_init(mm, 0, p_size);
+ ret = drm_mm_init(&rman->mm, 0, p_size);
if (ret) {
- kfree(mm);
+ kfree(rman);
return ret;
}
- man->priv = mm;
+ spin_lock_init(&rman->lock);
+ man->priv = rman;
return 0;
}
static int ttm_bo_man_takedown(struct ttm_mem_type_manager *man)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
- int ret = 0;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+ struct drm_mm *mm = &rman->mm;
- spin_lock(&glob->lru_lock);
+ spin_lock(&rman->lock);
if (drm_mm_clean(mm)) {
drm_mm_takedown(mm);
- kfree(mm);
+ spin_unlock(&rman->lock);
+ kfree(rman);
man->priv = NULL;
- } else
- ret = -EBUSY;
- spin_unlock(&glob->lru_lock);
- return ret;
+ return 0;
+ }
+ spin_unlock(&rman->lock);
+ return -EBUSY;
}
static void ttm_bo_man_debug(struct ttm_mem_type_manager *man,
const char *prefix)
{
- struct ttm_bo_global *glob = man->bdev->glob;
- struct drm_mm *mm = man->priv;
+ struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
- spin_lock(&glob->lru_lock);
- drm_mm_debug_table(mm, prefix);
- spin_unlock(&glob->lru_lock);
+ spin_lock(&rman->lock);
+ drm_mm_debug_table(&rman->mm, prefix);
+ spin_unlock(&rman->lock);
}
const struct ttm_mem_type_manager_func ttm_bo_manager_func = {
return ret;
ret = be->func->bind(be, bo_mem);
- if (ret) {
- printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n");
+ if (unlikely(ret != 0))
return ret;
- }
ttm->state = tt_bound;
vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
first_pfn + 1;
- if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
+ vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages);
+ if (NULL == vsg->pages)
return -ENOMEM;
- memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
down_read(¤t->mm->mmap_sem);
ret = get_user_pages(current, current->mm,
(unsigned long)xfer->mem_addr,
fence_rep.error = ret;
fence_rep.fence_seq = (uint64_t) sequence;
+ fence_rep.pad64 = 0;
user_fence_rep = (struct drm_vmw_fence_rep __user *)
(unsigned long)arg->fence_rep;
&vmw_vram_ne_placement,
false, &vmw_dmabuf_bo_free);
vmw_overlay_resume_all(dev_priv);
+ if (unlikely(ret != 0))
+ vfbs->buffer = NULL;
return ret;
}
struct vmw_framebuffer_surface *vfbs =
vmw_framebuffer_to_vfbs(&vfb->base);
+ if (unlikely(vfbs->buffer == NULL))
+ return 0;
+
bo = &vfbs->buffer->base;
ttm_bo_unref(&bo);
vfbs->buffer = NULL;
return -EINVAL;
}
- dev_priv->ldu_priv = kmalloc(GFP_KERNEL, sizeof(*dev_priv->ldu_priv));
+ dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL);
if (!dev_priv->ldu_priv)
return -ENOMEM;
return -ENOSYS;
}
- overlay = kmalloc(GFP_KERNEL, sizeof(*overlay));
+ overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
if (!overlay)
return -ENOMEM;
depends on PCI
# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel GMA500
if NEW_LEDS
config LEDS_CLASS
- tristate "LED Class Support"
+ bool "LED Class Support"
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called leds-lp3944.
+config LEDS_LP5521
+ tristate "LED Support for N.S. LP5521 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5521 LED driver. It is 3 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
+config LEDS_LP5523
+ tristate "LED Support for N.S. LP5523 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5523 LED driver. It is 9 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
depends on X86 && SERIO_I8042 && DMI
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
+obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
+obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
__ATTR_NULL,
};
+static void led_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (void *)data;
+ unsigned long brightness;
+ unsigned long delay;
+
+ if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
+ brightness = led_get_brightness(led_cdev);
+ if (!brightness) {
+ /* Time to switch the LED on. */
+ brightness = led_cdev->blink_brightness;
+ delay = led_cdev->blink_delay_on;
+ } else {
+ /* Store the current brightness value to be able
+ * to restore it when the delay_off period is over.
+ */
+ led_cdev->blink_brightness = brightness;
+ brightness = LED_OFF;
+ delay = led_cdev->blink_delay_off;
+ }
+
+ led_set_brightness(led_cdev, brightness);
+
+ mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void led_stop_software_blink(struct led_classdev *led_cdev)
+{
+ /* deactivate previous settings */
+ del_timer_sync(&led_cdev->blink_timer);
+ led_cdev->blink_delay_on = 0;
+ led_cdev->blink_delay_off = 0;
+}
+
+static void led_set_software_blink(struct led_classdev *led_cdev,
+ unsigned long delay_on,
+ unsigned long delay_off)
+{
+ int current_brightness;
+
+ current_brightness = led_get_brightness(led_cdev);
+ if (current_brightness)
+ led_cdev->blink_brightness = current_brightness;
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+
+ if (delay_on == led_cdev->blink_delay_on &&
+ delay_off == led_cdev->blink_delay_off)
+ return;
+
+ led_stop_software_blink(led_cdev);
+
+ led_cdev->blink_delay_on = delay_on;
+ led_cdev->blink_delay_off = delay_off;
+
+ /* never on - don't blink */
+ if (!delay_on)
+ return;
+
+ /* never off - just set to brightness */
+ if (!delay_off) {
+ led_set_brightness(led_cdev, led_cdev->blink_brightness);
+ return;
+ }
+
+ mod_timer(&led_cdev->blink_timer, jiffies + 1);
+}
+
+
/**
* led_classdev_suspend - suspend an led_classdev.
* @led_cdev: the led_classdev to suspend.
led_update_brightness(led_cdev);
+ init_timer(&led_cdev->blink_timer);
+ led_cdev->blink_timer.function = led_timer_function;
+ led_cdev->blink_timer.data = (unsigned long)led_cdev;
+
#ifdef CONFIG_LEDS_TRIGGERS
led_trigger_set_default(led_cdev);
#endif
return 0;
}
-
EXPORT_SYMBOL_GPL(led_classdev_register);
/**
up_write(&led_cdev->trigger_lock);
#endif
+ /* Stop blinking */
+ led_brightness_set(led_cdev, LED_OFF);
+
device_unregister(led_cdev->dev);
down_write(&leds_list_lock);
}
EXPORT_SYMBOL_GPL(led_classdev_unregister);
+void led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ if (led_cdev->blink_set &&
+ led_cdev->blink_set(led_cdev, delay_on, delay_off))
+ return;
+
+ /* blink with 1 Hz as default if nothing specified */
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ led_set_software_blink(led_cdev, *delay_on, *delay_off);
+}
+EXPORT_SYMBOL(led_blink_set);
+
+void led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ led_stop_software_blink(led_cdev);
+ led_cdev->brightness_set(led_cdev, brightness);
+}
+EXPORT_SYMBOL(led_brightness_set);
+
static int __init leds_init(void)
{
leds_class = class_create(THIS_MODULE, "leds");
if (led_cdev->trigger->deactivate)
led_cdev->trigger->deactivate(led_cdev);
led_cdev->trigger = NULL;
- led_set_brightness(led_cdev, LED_OFF);
+ led_brightness_set(led_cdev, LED_OFF);
}
if (trigger) {
write_lock_irqsave(&trigger->leddev_list_lock, flags);
static int __init gpio_led_init(void)
{
- int ret;
+ int ret = 0;
#ifdef CONFIG_LEDS_GPIO_PLATFORM
ret = platform_driver_register(&gpio_led_driver);
--- /dev/null
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5521.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5521_PROGRAM_LENGTH 32 /* in bytes */
+
+#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */
+#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */
+
+#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */
+#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */
+
+#define LP5521_CMD_LOAD 0x15 /* 00010101 */
+#define LP5521_CMD_RUN 0x2a /* 00101010 */
+#define LP5521_CMD_DIRECT 0x3f /* 00111111 */
+#define LP5521_CMD_DISABLED 0x00 /* 00000000 */
+
+/* Registers */
+#define LP5521_REG_ENABLE 0x00
+#define LP5521_REG_OP_MODE 0x01
+#define LP5521_REG_R_PWM 0x02
+#define LP5521_REG_G_PWM 0x03
+#define LP5521_REG_B_PWM 0x04
+#define LP5521_REG_R_CURRENT 0x05
+#define LP5521_REG_G_CURRENT 0x06
+#define LP5521_REG_B_CURRENT 0x07
+#define LP5521_REG_CONFIG 0x08
+#define LP5521_REG_R_CHANNEL_PC 0x09
+#define LP5521_REG_G_CHANNEL_PC 0x0A
+#define LP5521_REG_B_CHANNEL_PC 0x0B
+#define LP5521_REG_STATUS 0x0C
+#define LP5521_REG_RESET 0x0D
+#define LP5521_REG_GPO 0x0E
+#define LP5521_REG_R_PROG_MEM 0x10
+#define LP5521_REG_G_PROG_MEM 0x30
+#define LP5521_REG_B_PROG_MEM 0x50
+
+#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM
+#define LP5521_PROG_MEM_SIZE 0x20
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT
+
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN 0x2A
+
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */
+#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT 1 /* Internal clock */
+#define LP5521_CLK_AUTO 2 /* Automatic clock selection */
+
+/* Status */
+#define LP5521_EXT_CLK_USED 0x08
+
+struct lp5521_engine {
+ const struct attribute_group *attributes;
+ int id;
+ u8 mode;
+ u8 prog_page;
+ u8 engine_mask;
+};
+
+struct lp5521_led {
+ int id;
+ u8 chan_nr;
+ u8 led_current;
+ u8 max_current;
+ struct led_classdev cdev;
+ struct work_struct brightness_work;
+ u8 brightness;
+};
+
+struct lp5521_chip {
+ struct lp5521_platform_data *pdata;
+ struct mutex lock; /* Serialize control */
+ struct i2c_client *client;
+ struct lp5521_engine engines[LP5521_MAX_ENGINES];
+ struct lp5521_led leds[LP5521_MAX_LEDS];
+ u8 num_channels;
+ u8 num_leds;
+};
+
+#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev)
+#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \
+ engines[(eng)->id - 1])
+#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \
+ leds[(led)->id])
+
+static void lp5521_led_brightness_work(struct work_struct *work);
+
+static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0)
+ return -EIO;
+
+ *buf = ret;
+ return 0;
+}
+
+static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 engine_state;
+
+ /* Only transition between RUN and DIRECT mode are handled here */
+ if (mode == LP5521_CMD_LOAD)
+ return 0;
+
+ if (mode == LP5521_CMD_DISABLED)
+ mode = LP5521_CMD_DIRECT;
+
+ ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+
+ /* set mode only for this engine */
+ engine_state &= ~(engine->engine_mask);
+ mode &= engine->engine_mask;
+ engine_state |= mode;
+ ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+
+ return ret;
+}
+
+static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(eng);
+ struct i2c_client *client = chip->client;
+ int ret;
+ int addr;
+ u8 mode;
+
+ /* move current engine to direct mode and remember the state */
+ ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+ usleep_range(1000, 10000);
+ ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+
+ /* For loading, all the engines to load mode */
+ lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ usleep_range(1000, 10000);
+ lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+ usleep_range(1000, 10000);
+
+ addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
+ i2c_smbus_write_i2c_block_data(client,
+ addr,
+ LP5521_PROG_MEM_SIZE,
+ pattern);
+
+ ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
+ return ret;
+}
+
+static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
+{
+ return lp5521_write(chip->client,
+ LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+ curr);
+}
+
+static void lp5521_init_engine(struct lp5521_chip *chip,
+ const struct attribute_group *attr_group)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ chip->engines[i].id = i + 1;
+ chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
+ chip->engines[i].prog_page = i;
+ chip->engines[i].attributes = &attr_group[i];
+ }
+}
+
+static int lp5521_configure(struct i2c_client *client,
+ const struct attribute_group *attr_group)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int ret;
+
+ lp5521_init_engine(chip, attr_group);
+
+ lp5521_write(client, LP5521_REG_RESET, 0xff);
+
+ usleep_range(10000, 20000);
+
+ /* Set all PWMs to direct control mode */
+ ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
+
+ /* Enable auto-powersave, set charge pump to auto, red to battery */
+ ret |= lp5521_write(client, LP5521_REG_CONFIG,
+ LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+
+ /* Initialize all channels PWM to zero -> leds off */
+ ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
+ ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
+ ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
+
+ /* Set engines are set to run state when OP_MODE enables engines */
+ ret |= lp5521_write(client, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+ LP5521_EXEC_RUN);
+ /* enable takes 500us */
+ usleep_range(500, 20000);
+
+ return ret;
+}
+
+static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
+{
+ int ret;
+ u8 status;
+
+ ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ /* Check that ext clock is really in use if requested */
+ if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
+ if ((status & LP5521_EXT_CLK_USED) == 0)
+ return -EIO;
+ return 0;
+}
+
+static void lp5521_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp5521_led *led = cdev_to_led(cdev);
+ led->brightness = (u8)brightness;
+ schedule_work(&led->brightness_work);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+ struct lp5521_led *led = container_of(work,
+ struct lp5521_led,
+ brightness_work);
+ struct lp5521_chip *chip = led_to_lp5521(led);
+ struct i2c_client *client = chip->client;
+
+ mutex_lock(&chip->lock);
+ lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+/* Detect the chip by setting its ENABLE register and reading it back. */
+static int lp5521_detect(struct i2c_client *client)
+{
+ int ret;
+ u8 buf;
+
+ ret = lp5521_write(client, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+ if (ret)
+ return ret;
+ usleep_range(1000, 10000);
+ ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
+ if (ret)
+ return ret;
+ if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+ return -ENODEV;
+
+ return 0;
+}
+
+/* Set engine mode and create appropriate sysfs attributes, if required. */
+static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ struct device *dev = &client->dev;
+ int ret = 0;
+
+ /* if in that mode already do nothing, except for run */
+ if (mode == engine->mode && mode != LP5521_CMD_RUN)
+ return 0;
+
+ if (mode == LP5521_CMD_RUN) {
+ ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
+ } else if (mode == LP5521_CMD_LOAD) {
+ lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+ lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
+
+ ret = sysfs_create_group(&dev->kobj, engine->attributes);
+ if (ret)
+ return ret;
+ } else if (mode == LP5521_CMD_DISABLED) {
+ lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+ }
+
+ /* remove load attribute from sysfs if not in load mode */
+ if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, engine->attributes);
+
+ engine->mode = mode;
+
+ return ret;
+}
+
+static int lp5521_do_store_load(struct lp5521_engine *engine,
+ const char *buf, size_t len)
+{
+ struct lp5521_chip *chip = engine_to_lp5521(engine);
+ struct i2c_client *client = chip->client;
+ int ret, nrchars, offset = 0, i = 0;
+ char c[3];
+ unsigned cmd;
+ u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+
+ while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto fail;
+ pattern[i] = (u8)cmd;
+
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto fail;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_load_program(engine, pattern);
+ mutex_unlock(&chip->lock);
+
+ if (ret) {
+ dev_err(&client->dev, "failed loading pattern\n");
+ return ret;
+ }
+
+ return len;
+fail:
+ dev_err(&client->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ switch (chip->engines[nr - 1].mode) {
+ case LP5521_CMD_RUN:
+ return sprintf(buf, "run\n");
+ case LP5521_CMD_LOAD:
+ return sprintf(buf, "load\n");
+ case LP5521_CMD_DISABLED:
+ return sprintf(buf, "disabled\n");
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ struct lp5521_engine *engine = &chip->engines[nr - 1];
+ mutex_lock(&chip->lock);
+
+ if (!strncmp(buf, "run", 3))
+ lp5521_set_mode(engine, LP5521_CMD_RUN);
+ else if (!strncmp(buf, "load", 4))
+ lp5521_set_mode(engine, LP5521_CMD_LOAD);
+ else if (!strncmp(buf, "disabled", 8))
+ lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+
+ mutex_unlock(&chip->lock);
+ return len;
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+ struct lp5521_chip *chip = led_to_lp5521(led);
+ ssize_t ret;
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_set_led_current(chip, led->id, curr);
+ mutex_unlock(&chip->lock);
+
+ if (ret < 0)
+ return ret;
+
+ led->led_current = (u8)curr;
+
+ return len;
+}
+
+static ssize_t lp5521_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int ret;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_run_selftest(chip, buf);
+ mutex_unlock(&chip->lock);
+ return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5521_led_attributes[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+
+static struct attribute_group lp5521_led_attribute_group = {
+ .attrs = lp5521_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+ show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+ show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+ show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+
+static struct attribute *lp5521_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine1_attributes[] = {
+ &dev_attr_engine1_load.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine2_attributes[] = {
+ &dev_attr_engine2_load.attr,
+ NULL
+};
+
+static struct attribute *lp5521_engine3_attributes[] = {
+ &dev_attr_engine3_load.attr,
+ NULL
+};
+
+static const struct attribute_group lp5521_group = {
+ .attrs = lp5521_attributes,
+};
+
+static const struct attribute_group lp5521_engine_group[] = {
+ {.attrs = lp5521_engine1_attributes },
+ {.attrs = lp5521_engine2_attributes },
+ {.attrs = lp5521_engine3_attributes },
+};
+
+static int lp5521_register_sysfs(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ return sysfs_create_group(&dev->kobj, &lp5521_group);
+}
+
+static void lp5521_unregister_sysfs(struct i2c_client *client)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &lp5521_group);
+
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ if (chip->engines[i].mode == LP5521_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj,
+ chip->engines[i].attributes);
+ }
+
+ for (i = 0; i < chip->num_leds; i++)
+ sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+ &lp5521_led_attribute_group);
+}
+
+static int __init lp5521_init_led(struct lp5521_led *led,
+ struct i2c_client *client,
+ int chan, struct lp5521_platform_data *pdata)
+{
+ struct device *dev = &client->dev;
+ char name[32];
+ int res;
+
+ if (chan >= LP5521_MAX_LEDS)
+ return -EINVAL;
+
+ if (pdata->led_config[chan].led_current == 0)
+ return 0;
+
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+
+ if (led->chan_nr >= LP5521_MAX_LEDS) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ LP5521_MAX_LEDS - 1);
+ return -EINVAL;
+ }
+
+ snprintf(name, sizeof(name), "%s:channel%d", client->name, chan);
+ led->cdev.brightness_set = lp5521_set_brightness;
+ led->cdev.name = name;
+ res = led_classdev_register(dev, &led->cdev);
+ if (res < 0) {
+ dev_err(dev, "couldn't register led on channel %d\n", chan);
+ return res;
+ }
+
+ res = sysfs_create_group(&led->cdev.dev->kobj,
+ &lp5521_led_attribute_group);
+ if (res < 0) {
+ dev_err(dev, "couldn't register current attribute\n");
+ led_classdev_unregister(&led->cdev);
+ return res;
+ }
+ return 0;
+}
+
+static int lp5521_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp5521_chip *chip;
+ struct lp5521_platform_data *pdata;
+ int ret, i, led;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ ret = -EINVAL;
+ goto fail1;
+ }
+
+ mutex_init(&chip->lock);
+
+ chip->pdata = pdata;
+
+ if (pdata->setup_resources) {
+ ret = pdata->setup_resources();
+ if (ret < 0)
+ goto fail1;
+ }
+
+ if (pdata->enable) {
+ pdata->enable(0);
+ usleep_range(1000, 10000);
+ pdata->enable(1);
+ usleep_range(1000, 10000); /* Spec says min 500us */
+ }
+
+ ret = lp5521_detect(client);
+
+ if (ret) {
+ dev_err(&client->dev, "Chip not found\n");
+ goto fail2;
+ }
+
+ dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+ ret = lp5521_configure(client, lp5521_engine_group);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring chip\n");
+ goto fail2;
+ }
+
+ /* Initialize leds */
+ chip->num_channels = pdata->num_channels;
+ chip->num_leds = 0;
+ led = 0;
+ for (i = 0; i < pdata->num_channels; i++) {
+ /* Do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
+ if (ret) {
+ dev_err(&client->dev, "error initializing leds\n");
+ goto fail3;
+ }
+ chip->num_leds++;
+
+ chip->leds[led].id = led;
+ /* Set initial LED current */
+ lp5521_set_led_current(chip, led,
+ chip->leds[led].led_current);
+
+ INIT_WORK(&(chip->leds[led].brightness_work),
+ lp5521_led_brightness_work);
+
+ led++;
+ }
+
+ ret = lp5521_register_sysfs(client);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto fail3;
+ }
+ return ret;
+fail3:
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+fail2:
+ if (pdata->enable)
+ pdata->enable(0);
+ if (pdata->release_resources)
+ pdata->release_resources();
+fail1:
+ kfree(chip);
+ return ret;
+}
+
+static int lp5521_remove(struct i2c_client *client)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(client);
+ int i;
+
+ lp5521_unregister_sysfs(client);
+
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+
+ if (chip->pdata->enable)
+ chip->pdata->enable(0);
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+ kfree(chip);
+ return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+ { "lp5521", 0 }, /* Three channel chip */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+static struct i2c_driver lp5521_driver = {
+ .driver = {
+ .name = "lp5521",
+ },
+ .probe = lp5521_probe,
+ .remove = lp5521_remove,
+ .id_table = lp5521_id,
+};
+
+static int __init lp5521_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&lp5521_driver);
+
+ if (ret < 0)
+ printk(KERN_ALERT "Adding lp5521 driver failed\n");
+
+ return ret;
+}
+
+static void __exit lp5521_exit(void)
+{
+ i2c_del_driver(&lp5521_driver);
+}
+
+module_init(lp5521_init);
+module_exit(lp5521_exit);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE 0x00
+#define LP5523_REG_OP_MODE 0x01
+#define LP5523_REG_RATIOMETRIC_MSB 0x02
+#define LP5523_REG_RATIOMETRIC_LSB 0x03
+#define LP5523_REG_ENABLE_LEDS_MSB 0x04
+#define LP5523_REG_ENABLE_LEDS_LSB 0x05
+#define LP5523_REG_LED_CNTRL_BASE 0x06
+#define LP5523_REG_LED_PWM_BASE 0x16
+#define LP5523_REG_LED_CURRENT_BASE 0x26
+#define LP5523_REG_CONFIG 0x36
+#define LP5523_REG_CHANNEL1_PC 0x37
+#define LP5523_REG_CHANNEL2_PC 0x38
+#define LP5523_REG_CHANNEL3_PC 0x39
+#define LP5523_REG_STATUS 0x3a
+#define LP5523_REG_GPO 0x3b
+#define LP5523_REG_VARIABLE 0x3c
+#define LP5523_REG_RESET 0x3d
+#define LP5523_REG_TEMP_CTRL 0x3e
+#define LP5523_REG_TEMP_READ 0x3f
+#define LP5523_REG_TEMP_WRITE 0x40
+#define LP5523_REG_LED_TEST_CTRL 0x41
+#define LP5523_REG_LED_TEST_ADC 0x42
+#define LP5523_REG_ENG1_VARIABLE 0x45
+#define LP5523_REG_ENG2_VARIABLE 0x46
+#define LP5523_REG_ENG3_VARIABLE 0x47
+#define LP5523_REG_MASTER_FADER1 0x48
+#define LP5523_REG_MASTER_FADER2 0x49
+#define LP5523_REG_MASTER_FADER3 0x4a
+#define LP5523_REG_CH1_PROG_START 0x4c
+#define LP5523_REG_CH2_PROG_START 0x4d
+#define LP5523_REG_CH3_PROG_START 0x4e
+#define LP5523_REG_PROG_PAGE_SEL 0x4f
+#define LP5523_REG_PROG_MEM 0x50
+
+#define LP5523_CMD_LOAD 0x15 /* 00010101 */
+#define LP5523_CMD_RUN 0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED 0x00 /* 00000000 */
+
+#define LP5523_ENABLE 0x40
+#define LP5523_AUTO_INC 0x40
+#define LP5523_PWR_SAVE 0x20
+#define LP5523_PWM_PWR_SAVE 0x04
+#define LP5523_CP_1 0x08
+#define LP5523_CP_1_5 0x10
+#define LP5523_CP_AUTO 0x18
+#define LP5523_INT_CLK 0x01
+#define LP5523_AUTO_CLK 0x02
+#define LP5523_EN_LEDTEST 0x80
+#define LP5523_LEDTEST_DONE 0x80
+
+#define LP5523_DEFAULT_CURRENT 50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH 32 /* in bytes */
+#define LP5523_PROGRAM_PAGES 6
+#define LP5523_ADC_SHORTCIRC_LIM 80
+
+#define LP5523_LEDS 9
+#define LP5523_ENGINES 3
+
+#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED 0x08
+
+#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id) (((id) - 1) * 2)
+
+struct lp5523_engine {
+ const struct attribute_group *attributes;
+ int id;
+ u8 mode;
+ u8 prog_page;
+ u8 mux_page;
+ u16 led_mux;
+ u8 engine_mask;
+};
+
+struct lp5523_led {
+ int id;
+ u8 chan_nr;
+ u8 led_current;
+ u8 max_current;
+ struct led_classdev cdev;
+ struct work_struct brightness_work;
+ u8 brightness;
+};
+
+struct lp5523_chip {
+ struct mutex lock; /* Serialize control */
+ struct i2c_client *client;
+ struct lp5523_engine engines[LP5523_ENGINES];
+ struct lp5523_led leds[LP5523_LEDS];
+ struct lp5523_platform_data *pdata;
+ u8 num_channels;
+ u8 num_leds;
+};
+
+#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev)
+
+static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+ return container_of(engine, struct lp5523_chip,
+ engines[engine->id - 1]);
+}
+
+static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+ return container_of(led, struct lp5523_chip,
+ leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+ s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ return -EIO;
+
+ *buf = ret;
+ return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+ int ret;
+ u8 buf;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+ if (ret)
+ return ret;
+ ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+ if (ret)
+ return ret;
+ if (buf == 0x40)
+ return 0;
+ else
+ return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int ret = 0;
+ u8 status;
+
+ /* one pattern per engine setting led mux start and stop addresses */
+ u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ };
+
+ lp5523_write(client, LP5523_REG_RESET, 0xff);
+
+ usleep_range(10000, 100000);
+
+ ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+ /* Chip startup time after reset is 500 us */
+ usleep_range(1000, 10000);
+
+ ret |= lp5523_write(client, LP5523_REG_CONFIG,
+ LP5523_AUTO_INC | LP5523_PWR_SAVE |
+ LP5523_CP_AUTO | LP5523_AUTO_CLK |
+ LP5523_PWM_PWR_SAVE);
+
+ /* turn on all leds */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+ /* hardcode 32 bytes of memory for each engine from program memory */
+ ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+ ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+ ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+ /* write led mux address space for each channel */
+ ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+ ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+ ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+ if (ret) {
+ dev_err(&client->dev, "could not load mux programs\n");
+ return -1;
+ }
+
+ /* set all engines exec state and mode to run 00101010 */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE,
+ (LP5523_CMD_RUN | LP5523_ENABLE));
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+ if (ret) {
+ dev_err(&client->dev, "could not start mux programs\n");
+ return -1;
+ }
+
+ /* Wait 3ms and check the engine status */
+ usleep_range(3000, 20000);
+ lp5523_read(client, LP5523_REG_STATUS, &status);
+ status &= LP5523_ENG_STATUS_MASK;
+
+ if (status == LP5523_ENG_STATUS_MASK) {
+ dev_dbg(&client->dev, "all engines configured\n");
+ } else {
+ dev_info(&client->dev, "status == %x\n", status);
+ dev_err(&client->dev, "cound not configure LED engine\n");
+ return -1;
+ }
+
+ dev_info(&client->dev, "disabling engines\n");
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+ return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 engine_state;
+
+ ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+ if (ret)
+ goto fail;
+
+ engine_state &= ~(engine->engine_mask);
+
+ /* set mode only for this engine */
+ mode &= engine->engine_mask;
+
+ engine_state |= mode;
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+ return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+ (u8)(mux >> 8));
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+ engine->led_mux = mux;
+
+ return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+ engine->prog_page);
+ ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+ LP5523_PROGRAM_LENGTH, pattern);
+
+ return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE,
+ LP5523_CMD_RUN | LP5523_ENABLE);
+ if (ret)
+ goto fail;
+
+ ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+ return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+ int i;
+ u16 tmp_mux = 0;
+ len = len < LP5523_LEDS ? len : LP5523_LEDS;
+ for (i = 0; i < len; i++) {
+ switch (buf[i]) {
+ case '1':
+ tmp_mux |= (1 << i);
+ break;
+ case '0':
+ break;
+ case '\n':
+ i = len;
+ break;
+ default:
+ return -1;
+ }
+ }
+ *mux = tmp_mux;
+
+ return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+ int i, pos = 0;
+ for (i = 0; i < LP5523_LEDS; i++)
+ pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+ array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/* Sysfs interface */
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ char mux[LP5523_LEDS + 1];
+
+ lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+ return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr) \
+static ssize_t show_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_leds(dev, attr, buf, nr); \
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ u16 mux = 0;
+
+ if (lp5523_mux_parse(buf, &mux, len))
+ return -EINVAL;
+
+ if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+ return -EINVAL;
+
+ return len;
+}
+
+#define store_leds(nr) \
+static ssize_t store_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_leds(dev, attr, buf, len, nr); \
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i, ret, pos = 0;
+ int led = 0;
+ u8 status, adc, vdd;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ /* Check that ext clock is really in use if requested */
+ if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+ if ((status & LP5523_EXT_CLK_USED) == 0)
+ goto fail;
+
+ /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+ lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | 16);
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+ vdd--; /* There may be some fluctuation in measurement */
+
+ for (i = 0; i < LP5523_LEDS; i++) {
+ /* Skip non-existing channels */
+ if (chip->pdata->led_config[i].led_current == 0)
+ continue;
+
+ /* Set default current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->pdata->led_config[i].led_current);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+ /* let current stabilize 2ms before measurements start */
+ usleep_range(2000, 10000);
+ lp5523_write(chip->client,
+ LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | i);
+ /* ledtest takes 2.7ms */
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+ if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+ pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+ /* Restore current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->leds[led].led_current);
+ led++;
+ }
+ if (pos == 0)
+ pos = sprintf(buf, "OK\n");
+ goto release_lock;
+fail:
+ pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+ mutex_unlock(&chip->lock);
+
+ return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp5523_led *led = cdev_to_led(cdev);
+
+ led->brightness = (u8)brightness;
+
+ schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+ struct lp5523_led *led = container_of(work,
+ struct lp5523_led,
+ brightness_work);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ struct i2c_client *client = chip->client;
+
+ mutex_lock(&chip->lock);
+
+ lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+
+ mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+ const char *buf, size_t len)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret, nrchars, offset = 0, i = 0;
+ char c[3];
+ unsigned cmd;
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+ while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto fail;
+ pattern[i] = (u8)cmd;
+
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto fail;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_load_program(engine, pattern);
+ mutex_unlock(&chip->lock);
+
+ if (ret) {
+ dev_err(&client->dev, "failed loading pattern\n");
+ return ret;
+ }
+
+ return len;
+fail:
+ dev_err(&client->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ switch (chip->engines[nr - 1].mode) {
+ case LP5523_CMD_RUN:
+ return sprintf(buf, "run\n");
+ case LP5523_CMD_LOAD:
+ return sprintf(buf, "load\n");
+ case LP5523_CMD_DISABLED:
+ return sprintf(buf, "disabled\n");
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct lp5523_engine *engine = &chip->engines[nr - 1];
+ mutex_lock(&chip->lock);
+
+ if (!strncmp(buf, "run", 3))
+ lp5523_set_mode(engine, LP5523_CMD_RUN);
+ else if (!strncmp(buf, "load", 4))
+ lp5523_set_mode(engine, LP5523_CMD_LOAD);
+ else if (!strncmp(buf, "disabled", 8))
+ lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+ mutex_unlock(&chip->lock);
+ return len;
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ ssize_t ret;
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+ (u8)curr);
+ mutex_unlock(&chip->lock);
+
+ if (ret < 0)
+ return ret;
+
+ led->led_current = (u8)curr;
+
+ return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+ .attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+ show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+ show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+ show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+ show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+ show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+ show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine1_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine2_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+ &dev_attr_engine3_load.attr,
+ &dev_attr_engine3_leds.attr,
+ NULL
+};
+
+static const struct attribute_group lp5523_group = {
+ .attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+ {.attrs = lp5523_engine1_attributes },
+ {.attrs = lp5523_engine2_attributes },
+ {.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ int ret;
+
+ ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+ if (chip->engines[i].mode == LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+ for (i = 0; i < chip->num_leds; i++)
+ sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/* Set chip operating mode */
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+ /* engine to chip */
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ struct device *dev = &client->dev;
+ int ret = 0;
+
+ /* if in that mode already do nothing, except for run */
+ if (mode == engine->mode && mode != LP5523_CMD_RUN)
+ return 0;
+
+ if (mode == LP5523_CMD_RUN) {
+ ret = lp5523_run_program(engine);
+ } else if (mode == LP5523_CMD_LOAD) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret = sysfs_create_group(&dev->kobj, engine->attributes);
+ if (ret)
+ return ret;
+ } else if (mode == LP5523_CMD_DISABLED) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ }
+
+ /* remove load attribute from sysfs if not in load mode */
+ if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, engine->attributes);
+
+ engine->mode = mode;
+
+ return ret;
+}
+
+/*--------------------------------------------------------------*/
+/* Probe, Attach, Remove */
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+ if (id < 1 || id > LP5523_ENGINES)
+ return -1;
+ engine->id = id;
+ engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+ engine->prog_page = id - 1;
+ engine->mux_page = id + 2;
+ engine->attributes = &lp5523_engine_group[id - 1];
+
+ return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+ int chan, struct lp5523_platform_data *pdata)
+{
+ char name[32];
+ int res;
+
+ if (chan >= LP5523_LEDS)
+ return -EINVAL;
+
+ if (pdata->led_config[chan].led_current) {
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+
+ if (led->chan_nr >= LP5523_LEDS) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ LP5523_LEDS - 1);
+ return -EINVAL;
+ }
+
+ snprintf(name, 32, "lp5523:channel%d", chan);
+
+ led->cdev.name = name;
+ led->cdev.brightness_set = lp5523_set_brightness;
+ res = led_classdev_register(dev, &led->cdev);
+ if (res < 0) {
+ dev_err(dev, "couldn't register led on channel %d\n",
+ chan);
+ return res;
+ }
+ res = sysfs_create_group(&led->cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+ if (res < 0) {
+ dev_err(dev, "couldn't register current attribute\n");
+ led_classdev_unregister(&led->cdev);
+ return res;
+ }
+ } else {
+ led->led_current = 0;
+ }
+ return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp5523_chip *chip;
+ struct lp5523_platform_data *pdata;
+ int ret, i, led;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ ret = -EINVAL;
+ goto fail1;
+ }
+
+ mutex_init(&chip->lock);
+
+ chip->pdata = pdata;
+
+ if (pdata->setup_resources) {
+ ret = pdata->setup_resources();
+ if (ret < 0)
+ goto fail1;
+ }
+
+ if (pdata->enable) {
+ pdata->enable(0);
+ usleep_range(1000, 10000);
+ pdata->enable(1);
+ usleep_range(1000, 10000); /* Spec says min 500us */
+ }
+
+ ret = lp5523_detect(client);
+ if (ret)
+ goto fail2;
+
+ dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+ /* Initialize engines */
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ ret = lp5523_init_engine(&chip->engines[i], i + 1);
+ if (ret) {
+ dev_err(&client->dev, "error initializing engine\n");
+ goto fail2;
+ }
+ }
+ ret = lp5523_configure(client);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring chip\n");
+ goto fail2;
+ }
+
+ /* Initialize leds */
+ chip->num_channels = pdata->num_channels;
+ chip->num_leds = 0;
+ led = 0;
+ for (i = 0; i < pdata->num_channels; i++) {
+ /* Do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+ if (ret) {
+ dev_err(&client->dev, "error initializing leds\n");
+ goto fail3;
+ }
+ chip->num_leds++;
+
+ chip->leds[led].id = led;
+ /* Set LED current */
+ lp5523_write(client,
+ LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+ chip->leds[led].led_current);
+
+ INIT_WORK(&(chip->leds[led].brightness_work),
+ lp5523_led_brightness_work);
+
+ led++;
+ }
+
+ ret = lp5523_register_sysfs(client);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto fail3;
+ }
+ return ret;
+fail3:
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+fail2:
+ if (pdata->enable)
+ pdata->enable(0);
+ if (pdata->release_resources)
+ pdata->release_resources();
+fail1:
+ kfree(chip);
+ return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i;
+
+ lp5523_unregister_sysfs(client);
+
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+
+ if (chip->pdata->enable)
+ chip->pdata->enable(0);
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+ kfree(chip);
+ return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+ { "lp5523", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+ .driver = {
+ .name = "lp5523",
+ },
+ .probe = lp5523_probe,
+ .remove = lp5523_remove,
+ .id_table = lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&lp5523_driver);
+
+ if (ret < 0)
+ printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+ return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+ i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
*/
#include <linux/module.h>
-#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/leds.h>
-#include <linux/slab.h>
#include "leds.h"
-struct timer_trig_data {
- int brightness_on; /* LED brightness during "on" period.
- * (LED_OFF < brightness_on <= LED_FULL)
- */
- unsigned long delay_on; /* milliseconds on */
- unsigned long delay_off; /* milliseconds off */
- struct timer_list timer;
-};
-
-static void led_timer_function(unsigned long data)
-{
- struct led_classdev *led_cdev = (struct led_classdev *) data;
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- unsigned long brightness;
- unsigned long delay;
-
- if (!timer_data->delay_on || !timer_data->delay_off) {
- led_set_brightness(led_cdev, LED_OFF);
- return;
- }
-
- brightness = led_get_brightness(led_cdev);
- if (!brightness) {
- /* Time to switch the LED on. */
- brightness = timer_data->brightness_on;
- delay = timer_data->delay_on;
- } else {
- /* Store the current brightness value to be able
- * to restore it when the delay_off period is over.
- */
- timer_data->brightness_on = brightness;
- brightness = LED_OFF;
- delay = timer_data->delay_off;
- }
-
- led_set_brightness(led_cdev, brightness);
-
- mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
-}
-
static ssize_t led_delay_on_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- return sprintf(buf, "%lu\n", timer_data->delay_on);
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
}
static ssize_t led_delay_on_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
count++;
if (count == size) {
- if (timer_data->delay_on != state) {
- /* the new value differs from the previous */
- timer_data->delay_on = state;
-
- /* deactivate previous settings */
- del_timer_sync(&timer_data->timer);
-
- /* try to activate hardware acceleration, if any */
- if (!led_cdev->blink_set ||
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off)) {
- /* no hardware acceleration, blink via timer */
- mod_timer(&timer_data->timer, jiffies + 1);
- }
- }
+ led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
ret = count;
}
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- return sprintf(buf, "%lu\n", timer_data->delay_off);
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
}
static ssize_t led_delay_off_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
count++;
if (count == size) {
- if (timer_data->delay_off != state) {
- /* the new value differs from the previous */
- timer_data->delay_off = state;
-
- /* deactivate previous settings */
- del_timer_sync(&timer_data->timer);
-
- /* try to activate hardware acceleration, if any */
- if (!led_cdev->blink_set ||
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off)) {
- /* no hardware acceleration, blink via timer */
- mod_timer(&timer_data->timer, jiffies + 1);
- }
- }
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
ret = count;
}
static void timer_trig_activate(struct led_classdev *led_cdev)
{
- struct timer_trig_data *timer_data;
int rc;
- timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
- if (!timer_data)
- return;
-
- timer_data->brightness_on = led_get_brightness(led_cdev);
- if (timer_data->brightness_on == LED_OFF)
- timer_data->brightness_on = led_cdev->max_brightness;
- led_cdev->trigger_data = timer_data;
-
- init_timer(&timer_data->timer);
- timer_data->timer.function = led_timer_function;
- timer_data->timer.data = (unsigned long) led_cdev;
+ led_cdev->trigger_data = NULL;
rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
if (rc)
- goto err_out;
+ return;
rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
if (rc)
goto err_out_delayon;
- /* If there is hardware support for blinking, start one
- * user friendly blink rate chosen by the driver.
- */
- if (led_cdev->blink_set)
- led_cdev->blink_set(led_cdev,
- &timer_data->delay_on, &timer_data->delay_off);
+ led_cdev->trigger_data = (void *)1;
return;
err_out_delayon:
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
-err_out:
- led_cdev->trigger_data = NULL;
- kfree(timer_data);
}
static void timer_trig_deactivate(struct led_classdev *led_cdev)
{
- struct timer_trig_data *timer_data = led_cdev->trigger_data;
- unsigned long on = 0, off = 0;
-
- if (timer_data) {
+ if (led_cdev->trigger_data) {
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
device_remove_file(led_cdev->dev, &dev_attr_delay_off);
- del_timer_sync(&timer_data->timer);
- kfree(timer_data);
}
- /* If there is hardware support for blinking, stop it */
- if (led_cdev->blink_set)
- led_cdev->blink_set(led_cdev, &on, &off);
+ /* Stop blinking */
+ led_brightness_set(led_cdev, LED_OFF);
}
static struct led_trigger timer_led_trigger = {
static void adb_iop_complete(struct iop_msg *msg)
{
struct adb_request *req;
- uint flags;
+ unsigned long flags;
local_irq_save(flags);
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message;
struct adb_request *req;
- uint flags;
+ unsigned long flags;
#ifdef DEBUG_ADB_IOP
int i;
#endif
{
struct i2c_client *client = to_i2c_client(dev);
struct als_data *data = i2c_get_clientdata(client);
- unsigned int ret_val;
+ int ret_val;
unsigned long val;
if (strict_strtoul(buf, 10, &val))
{
struct bh1770_chip *chip = dev_get_drvdata(dev);
unsigned long value;
- size_t ret;
+ ssize_t ret;
if (strict_strtoul(buf, 0, &value))
return -EINVAL;
pm_runtime_get_sync(dev);
ret = bh1770_lux_rate(chip, chip->lux_rate_index);
- ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+ if (ret < 0) {
+ pm_runtime_put(dev);
+ goto leave;
+ }
+ ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
if (ret < 0) {
pm_runtime_put(dev);
goto leave;
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
- unsigned int ret_val;
+ int ret_val;
unsigned long val;
if (strict_strtoul(buf, 10, &val))
val = 4;
ret_val = i2c_smbus_read_byte_data(client, 0x00);
+ if (ret_val < 0)
+ return ret_val;
ret_val &= 0xFC; /*reset the bit before setting them */
ret_val |= val - 1;
boolean
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
-comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
- depends on RT2X00_LIB=y && LEDS_CLASS=m
-
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
list_for_each_entry(port, &rio_mports, node) {
if (!request_mem_region(port->iores.start,
- port->iores.end - port->iores.start,
+ resource_size(&port->iores),
port->name)) {
printk(KERN_ERR
"RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
- (u64)port->iores.start, (u64)port->iores.end - 1);
+ (u64)port->iores.start, (u64)port->iores.end);
rc = -ENOMEM;
goto out;
}
struct device_attribute *attr, const char *buf, size_t count)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
- strict_strtoul(buf, 10, &data->cached_daylight_max);
return adp8860_store(dev, buf, count, ADP8860_BLMX1);
}
static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
if (val == 0) {
/* Enable automatic ambient light sensing */
adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
- } else if ((val > 0) && (val < 6)) {
+ } else if ((val > 0) && (val <= 3)) {
/* Disable automatic ambient light sensing */
adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
mutex_lock(&data->lock);
adp8860_read(data->client, ADP8860_CFGR, ®_val);
reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
- reg_val |= val << CFGR_BLV_SHIFT;
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
adp8860_write(data->client, ADP8860_CFGR, reg_val);
mutex_unlock(&data->lock);
}
const u16 slpin = 0x10;
const u16 disoff = 0x28;
- if (power) {
+ if (power <= FB_BLANK_NORMAL) {
if (priv->lcd_on)
return 0;
struct spi_device *spi = st->spi;
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
- if (power) {
+ if (power <= FB_BLANK_NORMAL) {
if (pdata)
lms283gf05_reset(pdata->reset_gpio,
pdata->reset_inverted);
},
.driver_data = (void *)&nvidia_chipset_data,
},
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookAir 3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookAir 3,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
{ }
};
struct pwm_device *pwm;
struct device *dev;
unsigned int period;
+ unsigned int lth_brightness;
int (*notify)(struct device *,
int brightness);
};
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
} else {
- pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+ brightness = pb->lth_brightness +
+ (brightness * (pb->period - pb->lth_brightness) / max);
+ pwm_config(pb->pwm, brightness, pb->period);
pwm_enable(pb->pwm);
}
return 0;
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
+ pb->lth_brightness = data->lth_brightness *
+ (data->pwm_period_ns / data->max_brightness);
pb->dev = &pdev->dev;
pb->pwm = pwm_request(data->pwm_id, "backlight");
return strlen(buf);
}
-static DEVICE_ATTR(gamma_table, 0644,
+static DEVICE_ATTR(gamma_table, 0444,
s6e63m0_sysfs_show_gamma_table, NULL);
-static int __init s6e63m0_probe(struct spi_device *spi)
+static int __devinit s6e63m0_probe(struct spi_device *spi)
{
int ret = 0;
struct s6e63m0 *lcd = NULL;
struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+ device_remove_file(&spi->dev, &dev_attr_gamma_table);
+ device_remove_file(&spi->dev, &dev_attr_gamma_mode);
+ backlight_device_unregister(lcd->bd);
lcd_device_unregister(lcd->ld);
kfree(lcd);
if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
*user = current_user();
if (user_shm_lock(size, *user)) {
- WARN_ONCE(1,
- "Using mlock ulimits for SHM_HUGETLB deprecated\n");
+ printk_once(KERN_WARNING "Using mlock ulimits for SHM_HUGETLB is deprecated\n");
} else {
*user = NULL;
return ERR_PTR(-EPERM);
static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
{
- struct file_lock *fl;
+ struct file_lock *fl, *ret;
struct fasync_struct *new;
- struct inode *inode = filp->f_path.dentry->d_inode;
int error;
fl = lease_alloc(filp, arg);
locks_free_lock(fl);
return -ENOMEM;
}
+ ret = fl;
lock_flocks();
- error = __vfs_setlease(filp, arg, &fl);
+ error = __vfs_setlease(filp, arg, &ret);
if (error) {
unlock_flocks();
locks_free_lock(fl);
goto out_free_fasync;
}
+ if (ret != fl)
+ locks_free_lock(fl);
/*
* fasync_insert_entry() returns the old entry if any.
* inserted it into the fasync list. Clear new so that
* we don't release it here.
*/
- if (!fasync_insert_entry(fd, filp, &fl->fl_fasync, new))
+ if (!fasync_insert_entry(fd, filp, &ret->fl_fasync, new))
new = NULL;
- if (error < 0) {
- /* remove lease just inserted by setlease */
- fl->fl_type = F_UNLCK | F_INPROGRESS;
- fl->fl_break_time = jiffies - 10;
- time_out_leases(inode);
- } else {
- error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
- }
+ error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
unlock_flocks();
out_free_fasync:
spin_unlock(&clp->cl_lock);
}
-static void nfsd4_register_conn(struct nfsd4_conn *conn)
+static int nfsd4_register_conn(struct nfsd4_conn *conn)
{
conn->cn_xpt_user.callback = nfsd4_conn_lost;
- register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
+ return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
}
static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
{
struct nfsd4_conn *conn;
u32 flags = NFS4_CDFC4_FORE;
+ int ret;
if (ses->se_flags & SESSION4_BACK_CHAN)
flags |= NFS4_CDFC4_BACK;
if (!conn)
return nfserr_jukebox;
nfsd4_hash_conn(conn, ses);
- nfsd4_register_conn(conn);
+ ret = nfsd4_register_conn(conn);
+ if (ret)
+ /* oops; xprt is already down: */
+ nfsd4_conn_lost(&conn->cn_xpt_user);
return nfs_ok;
}
{
struct nfs4_client *clp = ses->se_client;
struct nfsd4_conn *c;
+ int ret;
spin_lock(&clp->cl_lock);
c = __nfsd4_find_conn(new->cn_xprt, ses);
}
__nfsd4_hash_conn(new, ses);
spin_unlock(&clp->cl_lock);
- nfsd4_register_conn(new);
+ ret = nfsd4_register_conn(new);
+ if (ret)
+ /* oops; xprt is already down: */
+ nfsd4_conn_lost(&new->cn_xpt_user);
return;
}
uptodate = 0;
/*
- * A hole may still be marked uptodate because discard_buffer
- * leaves the flag set.
+ * set_page_dirty dirties all buffers in a page, independent
+ * of their state. The dirty state however is entirely
+ * meaningless for holes (!mapped && uptodate), so skip
+ * buffers covering holes here.
*/
if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
- ASSERT(!buffer_dirty(bh));
imap_valid = 0;
continue;
}
INIT_LIST_HEAD(list);
spin_lock(dwlk);
list_for_each_entry_safe(bp, n, dwq, b_list) {
- trace_xfs_buf_delwri_split(bp, _RET_IP_);
ASSERT(bp->b_flags & XBF_DELWRI);
if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
_XBF_RUN_QUEUES);
bp->b_flags |= XBF_WRITE;
list_move_tail(&bp->b_list, list);
+ trace_xfs_buf_delwri_split(bp, _RET_IP_);
} else
skipped++;
}
if (IS_ERR(dentry))
return PTR_ERR(dentry);
- kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
+ kbuf = kzalloc(al_hreq.buflen, GFP_KERNEL);
if (!kbuf)
goto out_dput;
inode->i_state = I_NEW;
inode_sb_list_add(inode);
- insert_inode_hash(inode);
+ /* make the inode look hashed for the writeback code */
+ hlist_add_fake(&inode->i_hash);
inode->i_mode = ip->i_d.di_mode;
inode->i_nlink = ip->i_d.di_nlink;
mp->m_qflags &= ~XFS_OQUOTA_ENFD;
} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
mp->m_flags |= XFS_MOUNT_DELAYLOG;
- cmn_err(CE_WARN,
- "Enabling EXPERIMENTAL delayed logging feature "
- "- use at your own risk.\n");
} else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) {
mp->m_flags &= ~XFS_MOUNT_DELAYLOG;
} else if (!strcmp(this_char, "ihashsize")) {
if (trylock) {
if (!mutex_trylock(&pag->pag_ici_reclaim_lock)) {
skipped++;
+ xfs_perag_put(pag);
continue;
}
first_index = pag->pag_ici_reclaim_cursor;
* If the file's parent directory is known, take its iolock in exclusive
* mode to prevent two sibling files from racing each other to migrate
* themselves and their parent to different AGs.
+ *
+ * Note that we lock the parent directory iolock inside the child
+ * iolock here. That's fine as we never hold both parent and child
+ * iolock in any other place. This is different from the ilock,
+ * which requires locking of the child after the parent for namespace
+ * operations.
*/
if (pip)
- xfs_ilock(pip, XFS_IOLOCK_EXCL);
+ xfs_ilock(pip, XFS_IOLOCK_EXCL | XFS_IOLOCK_PARENT);
/*
* A new AG needs to be found for the file. If the file's parent
pag = radix_tree_delete(&mp->m_perag_tree, agno);
spin_unlock(&mp->m_perag_lock);
ASSERT(pag);
+ ASSERT(atomic_read(&pag->pag_ref) == 0);
call_rcu(&pag->rcu_head, __xfs_free_perag);
}
}
#define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
#define xfs_trans_apply_dquot_deltas(tp)
#define xfs_trans_unreserve_and_mod_dquots(tp)
-#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags) (0)
-#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl) (0)
+static inline int xfs_trans_reserve_quota_nblks(struct xfs_trans *tp,
+ struct xfs_inode *ip, long nblks, long ninos, uint flags)
+{
+ return 0;
+}
+static inline int xfs_trans_reserve_quota_bydquots(struct xfs_trans *tp,
+ struct xfs_mount *mp, struct xfs_dquot *udqp,
+ struct xfs_dquot *gdqp, long nblks, long nions, uint flags)
+{
+ return 0;
+}
#define xfs_qm_vop_create_dqattach(tp, ip, u, g)
#define xfs_qm_vop_rename_dqattach(it) (0)
#define xfs_qm_vop_chown(tp, ip, old, new) (NULL)
#define xfs_qm_dqdetach(ip)
#define xfs_qm_dqrele(d)
#define xfs_qm_statvfs(ip, s)
-#define xfs_qm_sync(mp, fl) (0)
+static inline int xfs_qm_sync(struct xfs_mount *mp, int flags)
+{
+ return 0;
+}
#define xfs_qm_newmount(mp, a, b) (0)
#define xfs_qm_mount_quotas(mp)
#define xfs_qm_unmount(mp)
-#define xfs_qm_unmount_quotas(mp) (0)
+#define xfs_qm_unmount_quotas(mp)
#endif /* CONFIG_XFS_QUOTA */
#define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \
* together with the @destroy function,
* enables driver-specific objects derived from a ttm_buffer_object.
* On successful return, the object kref and list_kref are set to 1.
+ * If a failure occurs, the function will call the @destroy function, or
+ * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is
+ * illegal and will likely cause memory corruption.
+ *
* Returns
* -ENOMEM: Out of memory.
* -EINVAL: Invalid placement flags.
struct ttm_mem_type_manager;
struct ttm_mem_type_manager_func {
+ /**
+ * struct ttm_mem_type_manager member init
+ *
+ * @man: Pointer to a memory type manager.
+ * @p_size: Implementation dependent, but typically the size of the
+ * range to be managed in pages.
+ *
+ * Called to initialize a private range manager. The function is
+ * expected to initialize the man::priv member.
+ * Returns 0 on success, negative error code on failure.
+ */
int (*init)(struct ttm_mem_type_manager *man, unsigned long p_size);
+
+ /**
+ * struct ttm_mem_type_manager member takedown
+ *
+ * @man: Pointer to a memory type manager.
+ *
+ * Called to undo the setup done in init. All allocated resources
+ * should be freed.
+ */
int (*takedown)(struct ttm_mem_type_manager *man);
+
+ /**
+ * struct ttm_mem_type_manager member get_node
+ *
+ * @man: Pointer to a memory type manager.
+ * @bo: Pointer to the buffer object we're allocating space for.
+ * @placement: Placement details.
+ * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+ *
+ * This function should allocate space in the memory type managed
+ * by @man. Placement details if
+ * applicable are given by @placement. If successful,
+ * @mem::mm_node should be set to a non-null value, and
+ * @mem::start should be set to a value identifying the beginning
+ * of the range allocated, and the function should return zero.
+ * If the memory region accomodate the buffer object, @mem::mm_node
+ * should be set to NULL, and the function should return 0.
+ * If a system error occured, preventing the request to be fulfilled,
+ * the function should return a negative error code.
+ *
+ * Note that @mem::mm_node will only be dereferenced by
+ * struct ttm_mem_type_manager functions and optionally by the driver,
+ * which has knowledge of the underlying type.
+ *
+ * This function may not be called from within atomic context, so
+ * an implementation can and must use either a mutex or a spinlock to
+ * protect any data structures managing the space.
+ */
int (*get_node)(struct ttm_mem_type_manager *man,
struct ttm_buffer_object *bo,
struct ttm_placement *placement,
struct ttm_mem_reg *mem);
+
+ /**
+ * struct ttm_mem_type_manager member put_node
+ *
+ * @man: Pointer to a memory type manager.
+ * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+ *
+ * This function frees memory type resources previously allocated
+ * and that are identified by @mem::mm_node and @mem::start. May not
+ * be called from within atomic context.
+ */
void (*put_node)(struct ttm_mem_type_manager *man,
struct ttm_mem_reg *mem);
+
+ /**
+ * struct ttm_mem_type_manager member debug
+ *
+ * @man: Pointer to a memory type manager.
+ * @prefix: Prefix to be used in printout to identify the caller.
+ *
+ * This function is called to print out the state of the memory
+ * type manager to aid debugging of out-of-memory conditions.
+ * It may not be called from within atomic context.
+ */
void (*debug)(struct ttm_mem_type_manager *man, const char *prefix);
};
uint64_t size;
uint32_t available_caching;
uint32_t default_caching;
+ const struct ttm_mem_type_manager_func *func;
+ void *priv;
/*
- * Protected by the bdev->lru_lock.
- * TODO: Consider one lru_lock per ttm_mem_type_manager.
- * Plays ill with list removal, though.
+ * Protected by the global->lru_lock.
*/
- const struct ttm_mem_type_manager_func *func;
- void *priv;
+
struct list_head lru;
};
--- /dev/null
+#ifndef _LINUX_ATOMIC_H
+#define _LINUX_ATOMIC_H
+#include <asm/atomic.h>
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+ int val, c = hint;
+
+ /* sanity test, should be removed by compiler if hint is a constant */
+ if (!hint)
+ return atomic_inc_not_zero(v);
+
+ do {
+ val = atomic_cmpxchg(v, c, c + 1);
+ if (val == c)
+ return 1;
+ c = val;
+ } while (c);
+
+ return 0;
+}
+#endif
+
+#endif /* _LINUX_ATOMIC_H */
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/hardirq.h>
#include <asm/cacheflush.h>
unsigned int interval_msec);
extern int printk_delay_msec;
+extern int dmesg_restrict;
/*
* Print a one-time message (analogous to WARN_ONCE() et al):
--- /dev/null
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5521_H
+#define __LINUX_LP5521_H
+
+/* See Documentation/leds/leds-lp5521.txt */
+
+struct lp5521_led_config {
+ u8 chan_nr;
+ u8 led_current; /* mA x10, 0 if led is not connected */
+ u8 max_current;
+};
+
+#define LP5521_CLOCK_AUTO 0
+#define LP5521_CLOCK_INT 1
+#define LP5521_CLOCK_EXT 2
+
+struct lp5521_platform_data {
+ struct lp5521_led_config *led_config;
+ u8 num_channels;
+ u8 clock_mode;
+ int (*setup_resources)(void);
+ void (*release_resources)(void);
+ void (*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5521_H */
--- /dev/null
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+ u8 chan_nr;
+ u8 led_current; /* mA x10, 0 if led is not connected */
+ u8 max_current;
+};
+
+#define LP5523_CLOCK_AUTO 0
+#define LP5523_CLOCK_INT 1
+#define LP5523_CLOCK_EXT 2
+
+struct lp5523_platform_data {
+ struct lp5523_led_config *led_config;
+ u8 num_channels;
+ u8 clock_mode;
+ int (*setup_resources)(void);
+ void (*release_resources)(void);
+ void (*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5523_H */
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>
+#include <linux/timer.h>
struct device;
/*
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
- /* Activate hardware accelerated blink, delays are in
- * miliseconds and if none is provided then a sensible default
- * should be chosen. The call can adjust the timings if it can't
- * match the values specified exactly. */
+ /*
+ * Activate hardware accelerated blink, delays are in milliseconds
+ * and if both are zero then a sensible default should be chosen.
+ * The call should adjust the timings in that case and if it can't
+ * match the values specified exactly.
+ * Deactivate blinking again when the brightness is set to a fixed
+ * value via the brightness_set() callback.
+ */
int (*blink_set)(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off);
struct list_head node; /* LED Device list */
const char *default_trigger; /* Trigger to use */
+ unsigned long blink_delay_on, blink_delay_off;
+ struct timer_list blink_timer;
+ int blink_brightness;
+
#ifdef CONFIG_LEDS_TRIGGERS
/* Protects the trigger data below */
struct rw_semaphore trigger_lock;
extern void led_classdev_suspend(struct led_classdev *led_cdev);
extern void led_classdev_resume(struct led_classdev *led_cdev);
+/**
+ * led_blink_set - set blinking with software fallback
+ * @led_cdev: the LED to start blinking
+ * @delay_on: the time it should be on (in ms)
+ * @delay_off: the time it should ble off (in ms)
+ *
+ * This function makes the LED blink, attempting to use the
+ * hardware acceleration if possible, but falling back to
+ * software blinking if there is no hardware blinking or if
+ * the LED refuses the passed values.
+ *
+ * Note that if software blinking is active, simply calling
+ * led_cdev->brightness_set() will not stop the blinking,
+ * use led_classdev_brightness_set() instead.
+ */
+extern void led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+/**
+ * led_brightness_set - set LED brightness
+ * @led_cdev: the LED to set
+ * @brightness: the brightness to set it to
+ *
+ * Set an LED's brightness, and, if necessary, cancel the
+ * software blink timer that implements blinking when the
+ * hardware doesn't.
+ */
+extern void led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+
/*
* LED Triggers
*/
int pwm_id;
unsigned int max_brightness;
unsigned int dft_brightness;
+ unsigned int lth_brightness;
unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
* needed for RCU lookups (because root->height is unreliable). The only
* time callers need worry about this is when doing a lookup_slot under
* RCU.
+ *
+ * Indirect pointer in fact is also used to tag the last pointer of a node
+ * when it is shrunk, before we rcu free the node. See shrink code for
+ * details.
*/
#define RADIX_TREE_INDIRECT_PTR 1
-#define RADIX_TREE_RETRY ((void *)-1UL)
-
-static inline void *radix_tree_ptr_to_indirect(void *ptr)
-{
- return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
-}
-static inline void *radix_tree_indirect_to_ptr(void *ptr)
-{
- return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
-}
#define radix_tree_indirect_to_ptr(ptr) \
radix_tree_indirect_to_ptr((void __force *)(ptr))
* removed.
*
* For use with radix_tree_lookup_slot(). Caller must hold tree at least read
- * locked across slot lookup and dereference. More likely, will be used with
- * radix_tree_replace_slot(), as well, so caller will hold tree write locked.
+ * locked across slot lookup and dereference. Not required if write lock is
+ * held (ie. items cannot be concurrently inserted).
+ *
+ * radix_tree_deref_retry must be used to confirm validity of the pointer if
+ * only the read lock is held.
*/
static inline void *radix_tree_deref_slot(void **pslot)
{
- void *ret = rcu_dereference(*pslot);
- if (unlikely(radix_tree_is_indirect_ptr(ret)))
- ret = RADIX_TREE_RETRY;
- return ret;
+ return rcu_dereference(*pslot);
}
+
+/**
+ * radix_tree_deref_retry - check radix_tree_deref_slot
+ * @arg: pointer returned by radix_tree_deref_slot
+ * Returns: 0 if retry is not required, otherwise retry is required
+ *
+ * radix_tree_deref_retry must be used with radix_tree_deref_slot.
+ */
+static inline int radix_tree_deref_retry(void *arg)
+{
+ return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
+}
+
/**
* radix_tree_replace_slot - replace item in a slot
* @pslot: pointer to slot, returned by radix_tree_lookup_slot
#define _LINUX_RESOURCE_H
#include <linux/time.h>
+#include <linux/types.h>
/*
* Resource control/accounting header file for linux
struct net *xpt_net;
};
-static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
{
spin_lock(&xpt->xpt_lock);
- list_add(&u->list, &xpt->xpt_users);
+ list_del_init(&u->list);
spin_unlock(&xpt->xpt_lock);
}
-static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
{
spin_lock(&xpt->xpt_lock);
- list_del_init(&u->list);
+ if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
+ /*
+ * The connection is about to be deleted soon (or,
+ * worse, may already be deleted--in which case we've
+ * already notified the xpt_users).
+ */
+ spin_unlock(&xpt->xpt_lock);
+ return -ENOTCONN;
+ }
+ list_add(&u->list, &xpt->xpt_users);
spin_unlock(&xpt->xpt_lock);
+ return 0;
}
int svc_reg_xprt_class(struct svc_xprt_class *);
account_global_scheduler_latency(tsk, &lat);
- /*
- * short term hack; if we're > 32 we stop; future we recycle:
- */
- tsk->latency_record_count++;
- if (tsk->latency_record_count >= LT_SAVECOUNT)
- goto out_unlock;
-
- for (i = 0; i < LT_SAVECOUNT; i++) {
+ for (i = 0; i < tsk->latency_record_count; i++) {
struct latency_record *mylat;
int same = 1;
}
}
+ /*
+ * short term hack; if we're > 32 we stop; future we recycle:
+ */
+ if (tsk->latency_record_count >= LT_SAVECOUNT)
+ goto out_unlock;
+
/* Allocated a new one: */
- i = tsk->latency_record_count;
+ i = tsk->latency_record_count++;
memcpy(&tsk->latency_record[i], &lat, sizeof(struct latency_record));
out_unlock:
}
#endif
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
int do_syslog(int type, char __user *buf, int len, bool from_file)
{
unsigned i, j, limit, count;
int clean_sort_range(struct range *range, int az)
{
- int i, j, k = az - 1, nr_range = 0;
+ int i, j, k = az - 1, nr_range = az;
for (i = 0; i < k; i++) {
if (range[i].end)
.extra2 = &ten_thousand,
},
#endif
+ {
+ .procname = "dmesg_restrict",
+ .data = &dmesg_restrict,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
{
.procname = "ngroups_max",
.data = &ngroups_max,
};
static DEFINE_PER_CPU(struct radix_tree_preload, radix_tree_preloads) = { 0, };
+static inline void *ptr_to_indirect(void *ptr)
+{
+ return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
+}
+
+static inline void *indirect_to_ptr(void *ptr)
+{
+ return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
+}
+
static inline gfp_t root_gfp_mask(struct radix_tree_root *root)
{
return root->gfp_mask & __GFP_BITS_MASK;
return -ENOMEM;
/* Increase the height. */
- node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
+ node->slots[0] = indirect_to_ptr(root->rnode);
/* Propagate the aggregated tag info into the new root */
for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
newheight = root->height+1;
node->height = newheight;
node->count = 1;
- node = radix_tree_ptr_to_indirect(node);
+ node = ptr_to_indirect(node);
rcu_assign_pointer(root->rnode, node);
root->height = newheight;
} while (height > root->height);
return error;
}
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
height = root->height;
shift = (height-1) * RADIX_TREE_MAP_SHIFT;
rcu_assign_pointer(node->slots[offset], slot);
node->count++;
} else
- rcu_assign_pointer(root->rnode,
- radix_tree_ptr_to_indirect(slot));
+ rcu_assign_pointer(root->rnode, ptr_to_indirect(slot));
}
/* Go a level down */
return NULL;
return is_slot ? (void *)&root->rnode : node;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
height = node->height;
if (index > radix_tree_maxindex(height))
height--;
} while (height > 0);
- return is_slot ? (void *)slot:node;
+ return is_slot ? (void *)slot : indirect_to_ptr(node);
}
/**
height = root->height;
BUG_ON(index > radix_tree_maxindex(height));
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
while (height > 0) {
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
pathp->node = NULL;
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
while (height > 0) {
int offset;
if (!radix_tree_is_indirect_ptr(node))
return (index == 0);
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
height = node->height;
if (index > radix_tree_maxindex(height))
}
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
- slot = radix_tree_indirect_to_ptr(root->rnode);
+ slot = indirect_to_ptr(root->rnode);
/*
* we fill the path from (root->height - 2) to 0, leaving the index at
results[0] = node;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
slot = *(((void ***)results)[ret + i]);
if (!slot)
continue;
- results[ret + nr_found] = rcu_dereference_raw(slot);
+ results[ret + nr_found] =
+ indirect_to_ptr(rcu_dereference_raw(slot));
nr_found++;
}
ret += nr_found;
results[0] = (void **)&root->rnode;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
results[0] = node;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
slot = *(((void ***)results)[ret + i]);
if (!slot)
continue;
- results[ret + nr_found] = rcu_dereference_raw(slot);
+ results[ret + nr_found] =
+ indirect_to_ptr(rcu_dereference_raw(slot));
nr_found++;
}
ret += nr_found;
results[0] = (void **)&root->rnode;
return 1;
}
- node = radix_tree_indirect_to_ptr(node);
+ node = indirect_to_ptr(node);
max_index = radix_tree_maxindex(node->height);
void *newptr;
BUG_ON(!radix_tree_is_indirect_ptr(to_free));
- to_free = radix_tree_indirect_to_ptr(to_free);
+ to_free = indirect_to_ptr(to_free);
/*
* The candidate node has more than one child, or its child
/*
* We don't need rcu_assign_pointer(), since we are simply
- * moving the node from one part of the tree to another. If
- * it was safe to dereference the old pointer to it
+ * moving the node from one part of the tree to another: if it
+ * was safe to dereference the old pointer to it
* (to_free->slots[0]), it will be safe to dereference the new
- * one (root->rnode).
+ * one (root->rnode) as far as dependent read barriers go.
*/
newptr = to_free->slots[0];
if (root->height > 1)
- newptr = radix_tree_ptr_to_indirect(newptr);
+ newptr = ptr_to_indirect(newptr);
root->rnode = newptr;
root->height--;
+
+ /*
+ * We have a dilemma here. The node's slot[0] must not be
+ * NULLed in case there are concurrent lookups expecting to
+ * find the item. However if this was a bottom-level node,
+ * then it may be subject to the slot pointer being visible
+ * to callers dereferencing it. If item corresponding to
+ * slot[0] is subsequently deleted, these callers would expect
+ * their slot to become empty sooner or later.
+ *
+ * For example, lockless pagecache will look up a slot, deref
+ * the page pointer, and if the page is 0 refcount it means it
+ * was concurrently deleted from pagecache so try the deref
+ * again. Fortunately there is already a requirement for logic
+ * to retry the entire slot lookup -- the indirect pointer
+ * problem (replacing direct root node with an indirect pointer
+ * also results in a stale slot). So tag the slot as indirect
+ * to force callers to retry.
+ */
+ if (root->height == 0)
+ *((unsigned long *)&to_free->slots[0]) |=
+ RADIX_TREE_INDIRECT_PTR;
+
radix_tree_node_free(to_free);
}
}
root->rnode = NULL;
goto out;
}
- slot = radix_tree_indirect_to_ptr(slot);
+ slot = indirect_to_ptr(slot);
shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
pathp->node = NULL;
radix_tree_node_free(to_free);
if (pathp->node->count) {
- if (pathp->node ==
- radix_tree_indirect_to_ptr(root->rnode))
+ if (pathp->node == indirect_to_ptr(root->rnode))
radix_tree_shrink(root);
goto out;
}
pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
if (pagep) {
page = radix_tree_deref_slot(pagep);
- if (unlikely(!page || page == RADIX_TREE_RETRY))
+ if (unlikely(!page))
+ goto out;
+ if (radix_tree_deref_retry(page))
goto repeat;
if (!page_cache_get_speculative(page))
goto repeat;
}
}
+out:
rcu_read_unlock();
return page;
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page)) {
+ if (ret)
+ start = pages[ret-1]->index;
goto restart;
+ }
if (!page_cache_get_speculative(page))
goto repeat;
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page))
goto restart;
if (page->mapping == NULL || page->index != index)
page = radix_tree_deref_slot((void **)pages[i]);
if (unlikely(!page))
continue;
- /*
- * this can only trigger if nr_found == 1, making livelock
- * a non issue.
- */
- if (unlikely(page == RADIX_TREE_RETRY))
+ if (radix_tree_deref_retry(page))
goto restart;
if (!page_cache_get_speculative(page))
goto page_not_up_to_date;
if (!trylock_page(page))
goto page_not_up_to_date;
+ /* Did it get truncated before we got the lock? */
+ if (!page->mapping)
+ goto page_not_up_to_date_locked;
if (!mapping->a_ops->is_partially_uptodate(page,
desc, offset))
goto page_not_up_to_date_locked;
memset(mem, 0, size);
mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
- if (!mem->stat) {
- if (size < PAGE_SIZE)
- kfree(mem);
- else
- vfree(mem);
- mem = NULL;
- }
+ if (!mem->stat)
+ goto out_free;
spin_lock_init(&mem->pcp_counter_lock);
return mem;
+
+out_free:
+ if (size < PAGE_SIZE)
+ kfree(mem);
+ else
+ vfree(mem);
+ return NULL;
}
/*
* back off and wait for congestion to clear because further reclaim
* will encounter the same problem
*/
- if (nr_dirty == nr_congested)
+ if (nr_dirty == nr_congested && nr_dirty != 0)
zone_set_flag(zone, ZONE_CONGESTED);
free_page_list(&free_pages);
If you are unsure as to whether this is required, answer N.
+config SECURITY_DMESG_RESTRICT
+ bool "Restrict unprivileged access to the kernel syslog"
+ default n
+ help
+ This enforces restrictions on unprivileged users reading the kernel
+ syslog via dmesg(8).
+
+ If this option is not selected, no restrictions will be enforced
+ unless the dmesg_restrict sysctl is explicitly set to (1).
+
+ If you are unsure how to answer this question, answer N.
+
config SECURITY
bool "Enable different security models"
depends on SYSFS
error = register_security(&apparmor_ops);
if (error) {
AA_ERROR("Unable to register AppArmor\n");
- goto register_security_out;
+ goto set_init_cxt_out;
}
/* Report that AppArmor successfully initialized */
return error;
+set_init_cxt_out:
+ aa_free_task_context(current->real_cred->security);
+
register_security_out:
aa_free_root_ns();
apparmor_enabled = 0;
return error;
-
}
security_initcall(apparmor_init);
return ns;
fail_unconfined:
- kzfree(ns->base.name);
+ kzfree(ns->base.hname);
fail_ns:
kzfree(ns);
return NULL;
{
if (type != SYSLOG_ACTION_OPEN && from_file)
return 0;
+ if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
if ((type != SYSLOG_ACTION_READ_ALL &&
type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
return -EPERM;
projects / linux-2.6-microblaze.git / commitdiff