--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager MDIO Device
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: FMan MDIO Node.
+ The MDIO is a bus to which the PHY devices are connected.
+
+properties:
+ compatible:
+ enum:
+ - fsl,fman-mdio
+ - fsl,fman-xmdio
+ - fsl,fman-memac-mdio
+ description:
+ Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+ Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+ FMan v3.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: A reference to the input clock of the controller
+ from which the MDC frequency is derived.
+
+ interrupts:
+ maxItems: 1
+
+ fsl,fman-internal-mdio:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Fman has internal MDIO for internal PCS(Physical
+ Coding Sublayer) PHYs and external MDIO for external PHYs.
+ The settings and programming routines for internal/external
+ MDIO are different. Must be included for internal MDIO.
+
+ fsl,erratum-a009885:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Indicates the presence of the A009885
+ erratum describing that the contents of MDIO_DATA may
+ become corrupt unless it is read within 16 MDC cycles
+ of MDIO_CFG[BSY] being cleared, when performing an
+ MDIO read operation.
+
+ fsl,erratum-a011043:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates the presence of the A011043 erratum
+ describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
+ set when reading internal PCS registers. MDIO reads to
+ internal PCS registers may result in having the
+ MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
+ read data (MDIO_DATA[MDIO_DATA]) is correct.
+ Software may get false read error when reading internal
+ PCS registers through MDIO. As a workaround, all internal
+ MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
+
+ For internal PHY device on internal mdio bus, a PHY node should be created.
+ See the definition of the PHY node in booting-without-of.txt for an
+ example of how to define a PHY (Internal PHY has no interrupt line).
+ - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+ - For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+ The PCS PHY address should correspond to the value of the appropriate
+ MDEV_PORT.
+
+ little-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ IP block is little-endian mode. The default endian mode is big-endian.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 2 0 0>;
+ };
+
+ - |
+ mdio@e3120 {
+ compatible = "fsl,fman-mdio";
+ reg = <0xe3120 0xee0>;
+ fsl,fman-internal-mdio;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ - |
+ mdio@f1000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0xf1000 0x1000>;
+ fsl,fman-internal-mdio;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Device
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+ etc.) the FMan node will have child nodes for each of them.
+
+properties:
+ compatible:
+ enum:
+ - fsl,fman
+ description:
+ FMan version can be determined via FM_IP_REV_1 register in the
+ FMan block. The offset is 0xc4 from the beginning of the
+ Frame Processing Manager memory map (0xc3000 from the
+ beginning of the FMan node).
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the index of the FMan unit.
+
+ The cell-index value may be used by the SoC, to identify the
+ FMan unit in the SoC memory map. In the table below,
+ there's a description of the cell-index use in each SoC:
+
+ - P1023:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DEVDISR[1] 1 0
+
+ - P2041, P3041, P4080 P5020, P5040:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DCFG_DEVDISR2[6] 1 0
+ DCFG_DEVDISR2[14] 2 1
+ (Second FM available only in P4080 and P5040)
+
+ - B4860, T1040, T2080, T4240:
+ register[bit] FMan unit cell-index
+ ============================================================
+ DCFG_CCSR_DEVDISR2[24] 1 0
+ DCFG_CCSR_DEVDISR2[25] 2 1
+ (Second FM available only in T4240)
+
+ DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+ the specific SoC "Device Configuration/Pin Control" Memory
+ Map.
+
+ reg:
+ items:
+ - description: BMI configuration registers.
+ - description: QMI configuration registers.
+ - description: DMA configuration registers.
+ - description: FPM configuration registers.
+ - description: FMan controller configuration registers.
+ minItems: 1
+
+ ranges: true
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: fmanclk
+
+ interrupts:
+ items:
+ - description: The first element is associated with the event interrupts.
+ - description: the second element is associated with the error interrupts.
+
+ fsl,qman-channel-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Specifies the range of the available dedicated
+ channels in the FMan. The first cell specifies the beginning
+ of the range and the second cell specifies the number of
+ channels
+ items:
+ - description: The first cell specifies the beginning of the range.
+ - description: |
+ The second cell specifies the number of channels.
+ Further information available at:
+ "Work Queue (WQ) Channel Assignments in the QMan" section
+ in DPAA Reference Manual.
+
+ fsl,qman:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: See soc/fsl/qman.txt
+
+ fsl,bman:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: See soc/fsl/bman.txt
+
+ fsl,erratum-a050385:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: A boolean property. Indicates the presence of the
+ erratum A050385 which indicates that DMA transactions that are
+ split can result in a FMan lock.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+patternProperties:
+ '^muram@[a-f0-9]+$':
+ $ref: fsl,fman-muram.yaml
+
+ '^port@[a-f0-9]+$':
+ $ref: fsl,fman-port.yaml
+
+ '^ethernet@[a-f0-9]+$':
+ $ref: fsl,fman-dtsec.yaml
+
+ '^mdio@[a-f0-9]+$':
+ $ref: fsl,fman-mdio.yaml
+
+ '^phc@[a-f0-9]+$':
+ $ref: /schemas/ptp/fsl,ptp.yaml
+
+required:
+ - compatible
+ - cell-index
+ - reg
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+ - fsl,qman-channel-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ fman@400000 {
+ compatible = "fsl,fman";
+ reg = <0x400000 0x100000>;
+ ranges = <0 0x400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ clocks = <&fman_clk>;
+ clock-names = "fmanclk";
+ interrupts = <96 IRQ_TYPE_EDGE_FALLING>,
+ <16 IRQ_TYPE_EDGE_FALLING>;
+ fsl,qman-channel-range = <0x40 0xc>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x28000>;
+ };
+
+ port@81000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-v2-port-oh";
+ reg = <0x81000 0x1000>;
+ };
+
+ fman1_rx_0x8: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v2-port-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman1_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v2-port-tx";
+ reg = <0xa8000 0x1000>;
+ };
+
+ ethernet@e0000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <0>;
+ reg = <0xe0000 0x1000>;
+ ptp-timer = <&ptp_timer>;
+ fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+ tbi-handle = <&tbi5>;
+ };
+
+ ptp_timer: phc@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ mdio@f1000 {
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <101 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+++ /dev/null
-=============================================================================
-Freescale Frame Manager Device Bindings
-
-CONTENTS
- - FMan Node
- - FMan Port Node
- - FMan MURAM Node
- - FMan dTSEC/XGEC/mEMAC Node
- - FMan IEEE 1588 Node
- - FMan MDIO Node
- - Example
-
-=============================================================================
-FMan Node
-
-DESCRIPTION
-
-Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
-etc.) the FMan node will have child nodes for each of them.
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: Must include "fsl,fman"
- FMan version can be determined via FM_IP_REV_1 register in the
- FMan block. The offset is 0xc4 from the beginning of the
- Frame Processing Manager memory map (0xc3000 from the
- beginning of the FMan node).
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the index of the FMan unit.
-
- The cell-index value may be used by the SoC, to identify the
- FMan unit in the SoC memory map. In the table below,
- there's a description of the cell-index use in each SoC:
-
- - P1023:
- register[bit] FMan unit cell-index
- ============================================================
- DEVDISR[1] 1 0
-
- - P2041, P3041, P4080 P5020, P5040:
- register[bit] FMan unit cell-index
- ============================================================
- DCFG_DEVDISR2[6] 1 0
- DCFG_DEVDISR2[14] 2 1
- (Second FM available only in P4080 and P5040)
-
- - B4860, T1040, T2080, T4240:
- register[bit] FMan unit cell-index
- ============================================================
- DCFG_CCSR_DEVDISR2[24] 1 0
- DCFG_CCSR_DEVDISR2[25] 2 1
- (Second FM available only in T4240)
-
- DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
- the specific SoC "Device Configuration/Pin Control" Memory
- Map.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the offset of the
- following configuration registers:
- - BMI configuration registers.
- - QMI configuration registers.
- - DMA configuration registers.
- - FPM configuration registers.
- - FMan controller configuration registers.
-
-- ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- clocks
- Usage: required
- Value type: <prop-encoded-array>
- Definition: phandle for the fman input clock.
-
-- clock-names
- usage: required
- Value type: <stringlist>
- Definition: "fmanclk" for the fman input clock.
-
-- interrupts
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A pair of IRQs are specified in this property.
- The first element is associated with the event interrupts and
- the second element is associated with the error interrupts.
-
-- fsl,qman-channel-range
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Specifies the range of the available dedicated
- channels in the FMan. The first cell specifies the beginning
- of the range and the second cell specifies the number of
- channels.
- Further information available at:
- "Work Queue (WQ) Channel Assignments in the QMan" section
- in DPAA Reference Manual.
-
-- fsl,qman
-- fsl,bman
- Usage: required
- Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
-
-- fsl,erratum-a050385
- Usage: optional
- Value type: boolean
- Definition: A boolean property. Indicates the presence of the
- erratum A050385 which indicates that DMA transactions that are
- split can result in a FMan lock.
-
-=============================================================================
-FMan MURAM Node
-
-DESCRIPTION
-
-FMan Internal memory - shared between all the FMan modules.
-It contains data structures that are common and written to or read by
-the modules.
-FMan internal memory is split into the following parts:
- Packet buffering (Tx/Rx FIFOs)
- Frames internal context
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: Must include "fsl,fman-muram"
-
-- ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
- Specifies the multi-user memory offset and the size within
- the FMan.
-
-EXAMPLE
-
-muram@0 {
- compatible = "fsl,fman-muram";
- ranges = <0 0x000000 0x28000>;
-};
-
-=============================================================================
-FMan Port Node
-
-DESCRIPTION
-
-The Frame Manager (FMan) supports several types of hardware ports:
- Ethernet receiver (RX)
- Ethernet transmitter (TX)
- Offline/Host command (O/H)
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include one of the following:
- - "fsl,fman-v2-port-oh" for FManV2 OH ports
- - "fsl,fman-v2-port-rx" for FManV2 RX ports
- - "fsl,fman-v2-port-tx" for FManV2 TX ports
- - "fsl,fman-v3-port-oh" for FManV3 OH ports
- - "fsl,fman-v3-port-rx" for FManV3 RX ports
- - "fsl,fman-v3-port-tx" for FManV3 TX ports
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the hardware port id.
- Each hardware port on the FMan has its own hardware PortID.
- Super set of all hardware Port IDs available at FMan Reference
- Manual under "FMan Hardware Ports in Freescale Devices" table.
-
- Each hardware port is assigned a 4KB, port-specific page in
- the FMan hardware port memory region (which is part of the
- FMan memory map). The first 4 KB in the FMan hardware ports
- memory region is used for what are called common registers.
- The subsequent 63 4KB pages are allocated to the hardware
- ports.
- The page of a specific port is determined by the cell-index.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: There is one reg region describing the port
- configuration registers.
-
-- fsl,fman-10g-port
- Usage: optional
- Value type: boolean
- Definition: The default port rate is 1G.
- If this property exists, the port is s 10G port.
-
-- fsl,fman-best-effort-port
- Usage: optional
- Value type: boolean
- Definition: Can be defined only if 10G-support is set.
- This property marks a best-effort 10G port (10G port that
- may not be capable of line rate).
-
-EXAMPLE
-
-port@a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
-};
-
-port@88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
-};
-
-port@81000 {
- cell-index = <0x1>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x81000 0x1000>;
-};
-
-=============================================================================
-FMan dTSEC/XGEC/mEMAC Node
-
-Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
-
-============================================================================
-FMan IEEE 1588 Node
-
-Refer to Documentation/devicetree/bindings/ptp/fsl,ptp.yaml
-
-=============================================================================
-FMan MDIO Node
-
-DESCRIPTION
-
-The MDIO is a bus to which the PHY devices are connected.
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
- Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
- Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
- FMan v3.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- clocks
- Usage: optional
- Value type: <phandle>
- Definition: A reference to the input clock of the controller
- from which the MDC frequency is derived.
-
-- clock-frequency
- Usage: optional
- Value type: <u32>
- Definition: Specifies the external MDC frequency, in Hertz, to
- be used. Requires that the input clock is specified in the
- "clocks" property. See also: mdio.yaml.
-
-- suppress-preamble
- Usage: optional
- Value type: <boolean>
- Definition: Disable generation of preamble bits. See also:
- mdio.yaml.
-
-- interrupts
- Usage: required for external MDIO
- Value type: <prop-encoded-array>
- Definition: Event interrupt of external MDIO controller.
-
-- fsl,fman-internal-mdio
- Usage: required for internal MDIO
- Value type: boolean
- Definition: Fman has internal MDIO for internal PCS(Physical
- Coding Sublayer) PHYs and external MDIO for external PHYs.
- The settings and programming routines for internal/external
- MDIO are different. Must be included for internal MDIO.
-
-- fsl,erratum-a009885
- Usage: optional
- Value type: <boolean>
- Definition: Indicates the presence of the A009885
- erratum describing that the contents of MDIO_DATA may
- become corrupt unless it is read within 16 MDC cycles
- of MDIO_CFG[BSY] being cleared, when performing an
- MDIO read operation.
-
-- fsl,erratum-a011043
- Usage: optional
- Value type: <boolean>
- Definition: Indicates the presence of the A011043 erratum
- describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
- set when reading internal PCS registers. MDIO reads to
- internal PCS registers may result in having the
- MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
- read data (MDIO_DATA[MDIO_DATA]) is correct.
- Software may get false read error when reading internal
- PCS registers through MDIO. As a workaround, all internal
- MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
-
-For internal PHY device on internal mdio bus, a PHY node should be created.
-See the definition of the PHY node in booting-without-of.txt for an
-example of how to define a PHY (Internal PHY has no interrupt line).
-- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
-- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
- The PCS PHY address should correspond to the value of the appropriate
- MDEV_PORT.
-
-EXAMPLE
-
-Example for FMan v2 external MDIO:
-
-mdio@f1000 {
- compatible = "fsl,fman-xmdio";
- reg = <0xf1000 0x1000>;
- interrupts = <101 2 0 0>;
-};
-
-Example for FMan v2 internal MDIO:
-
-mdio@e3120 {
- compatible = "fsl,fman-mdio";
- reg = <0xe3120 0xee0>;
- fsl,fman-internal-mdio;
-
- tbi1: tbi-phy@8 {
- reg = <0x8>;
- device_type = "tbi-phy";
- };
-};
-
-Example for FMan v3 internal MDIO:
-
-mdio@f1000 {
- compatible = "fsl,fman-memac-mdio";
- reg = <0xf1000 0x1000>;
- fsl,fman-internal-mdio;
-
- pcsphy6: ethernet-phy@0 {
- reg = <0x0>;
- };
-};
-
-=============================================================================
-Example
-
-fman@400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- compatible = "fsl,fman"
- ranges = <0 0x400000 0x100000>;
- reg = <0x400000 0x100000>;
- clocks = <&fman_clk>;
- clock-names = "fmanclk";
- interrupts = <
- 96 2 0 0
- 16 2 1 1>;
- fsl,qman-channel-range = <0x40 0xc>;
-
- muram@0 {
- compatible = "fsl,fman-muram";
- reg = <0x0 0x28000>;
- };
-
- port@81000 {
- cell-index = <1>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x81000 0x1000>;
- };
-
- port@82000 {
- cell-index = <2>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x82000 0x1000>;
- };
-
- port@83000 {
- cell-index = <3>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x83000 0x1000>;
- };
-
- port@84000 {
- cell-index = <4>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x84000 0x1000>;
- };
-
- port@85000 {
- cell-index = <5>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x85000 0x1000>;
- };
-
- port@86000 {
- cell-index = <6>;
- compatible = "fsl,fman-v2-port-oh";
- reg = <0x86000 0x1000>;
- };
-
- fman1_rx_0x8: port@88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
- };
-
- fman1_rx_0x9: port@89000 {
- cell-index = <0x9>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x89000 0x1000>;
- };
-
- fman1_rx_0xa: port@8a000 {
- cell-index = <0xa>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8a000 0x1000>;
- };
-
- fman1_rx_0xb: port@8b000 {
- cell-index = <0xb>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8b000 0x1000>;
- };
-
- fman1_rx_0xc: port@8c000 {
- cell-index = <0xc>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x8c000 0x1000>;
- };
-
- fman1_rx_0x10: port@90000 {
- cell-index = <0x10>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x90000 0x1000>;
- };
-
- fman1_tx_0x28: port@a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
- };
-
- fman1_tx_0x29: port@a9000 {
- cell-index = <0x29>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa9000 0x1000>;
- };
-
- fman1_tx_0x2a: port@aa000 {
- cell-index = <0x2a>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xaa000 0x1000>;
- };
-
- fman1_tx_0x2b: port@ab000 {
- cell-index = <0x2b>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xab000 0x1000>;
- };
-
- fman1_tx_0x2c: port@ac0000 {
- cell-index = <0x2c>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xac000 0x1000>;
- };
-
- fman1_tx_0x30: port@b0000 {
- cell-index = <0x30>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xb0000 0x1000>;
- };
-
- ethernet@e0000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <0>;
- reg = <0xe0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
- tbi-handle = <&tbi5>;
- };
-
- ethernet@e2000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <1>;
- reg = <0xe2000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
- tbi-handle = <&tbi6>;
- };
-
- ethernet@e4000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <2>;
- reg = <0xe4000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
- tbi-handle = <&tbi7>;
- };
-
- ethernet@e6000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <3>;
- reg = <0xe6000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
- tbi-handle = <&tbi8>;
- };
-
- ethernet@e8000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <4>;
- reg = <0xf0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
- tbi-handle = <&tbi9>;
-
- ethernet@f0000 {
- cell-index = <8>;
- compatible = "fsl,fman-xgec";
- reg = <0xf0000 0x1000>;
- fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
- };
-
- ptp-timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
- };
-
- mdio@f1000 {
- compatible = "fsl,fman-xmdio";
- reg = <0xf1000 0x1000>;
- interrupts = <101 2 0 0>;
- };
-};
projects / linux-2.6-microblaze.git / commitdiff