arm64: dts: rockchip: fix rk3368-lion gmac reset gpio

The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.

While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.

So bring this in line and make both properties match, similar to the
other Rockchip board.

Fixes: d99a02bcfa81 ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index e17311e..216aafd 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -156,7 +156,7 @@
        pinctrl-0 = <&rgmii_pins>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 50000>;
-       snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+       snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
        tx_delay = <0x10>;
        rx_delay = <0x10>;
        status = "okay";