[ALSA] wavefront: add request_firmware()

Load the YSS225 register initialization data using request_firmware(),
if possible, instead of using the built-in data blob.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 565ed2a..4e3a972 100644 (file)
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -391,6 +391,7 @@ config SND_SSCAPE
 config SND_WAVEFRONT
        tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
        depends on SND
+       select FW_LOADER
        select SND_OPL3_LIB
        select SND_MPU401_UART
        select SND_CS4231_LIB

diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index 2e03dc5..15331ed 100644 (file)
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/wait.h>
+#include <linux/firmware.h>
 #include <sound/core.h>
 #include <sound/snd_wavefront.h>
 #include <sound/initval.h>
@@ -34,7 +35,15 @@
 
 #define WAIT_IDLE      0xff
 
+#define FIRMWARE_IN_THE_KERNEL
+
+#ifdef FIRMWARE_IN_THE_KERNEL
 #include "yss225.c"
+static const struct firmware yss225_registers_firmware = {
+       .data = (u8 *)yss225_registers,
+       .size = sizeof yss225_registers
+};
+#endif
 
 static int
 wavefront_fx_idle (snd_wavefront_t *dev)
@@ -248,25 +257,47 @@ int __devinit
 snd_wavefront_fx_start (snd_wavefront_t *dev)
 {
        unsigned int i;
+       int err;
+       const struct firmware *firmware;
 
        if (dev->fx_initialized)
                return 0;
 
-       for (i = 0; i < ARRAY_SIZE(yss225_registers); ++i) {
-               if (yss225_registers[i].addr >= 8 &&
-                   yss225_registers[i].addr < 16) {
-                       outb(yss225_registers[i].data,
-                            yss225_registers[i].addr + dev->base);
-               } else if (yss225_registers[i].addr == WAIT_IDLE) {
-                       if (!wavefront_fx_idle(dev))
-                               return -1;
+       err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
+                              dev->card->dev);
+       if (err < 0) {
+#ifdef FIRMWARE_IN_THE_KERNEL
+               firmware = &yss225_registers_firmware;
+#else
+               err = -1;
+               goto out;
+#endif
+       }
+
+       for (i = 0; i + 1 < firmware->size; i += 2) {
+               if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
+                       outb(firmware->data[i + 1],
+                            dev->base + firmware->data[i]);
+               } else if (firmware->data[i] == WAIT_IDLE) {
+                       if (!wavefront_fx_idle(dev)) {
+                               err = -1;
+                               goto out;
+                       }
                } else {
                        snd_printk(KERN_ERR "invalid address"
                                   " in register data\n");
-                       return -1;
+                       err = -1;
+                       goto out;
                }
        }
 
        dev->fx_initialized = 1;
-       return (0);
+       err = 0;
+
+out:
+#ifdef FIRMWARE_IN_THE_KERNEL
+       if (firmware != &yss225_registers_firmware)
+#endif
+               release_firmware(firmware);
+       return err;
 }