* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
  ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
  ARM: gic, local timers: use the request_percpu_irq() interface
  ARM: gic: consolidate PPI handling
  ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
  ARM: mach-s5p64x0: remove mach/memory.h
  ARM: mach-s3c64xx: remove mach/memory.h
  ARM: plat-mxc: remove mach/memory.h
  ARM: mach-prima2: remove mach/memory.h
  ARM: mach-zynq: remove mach/memory.h
  ARM: mach-bcmring: remove mach/memory.h
  ARM: mach-davinci: remove mach/memory.h
  ARM: mach-pxa: remove mach/memory.h
  ARM: mach-ixp4xx: remove mach/memory.h
  ARM: mach-h720x: remove mach/memory.h
  ARM: mach-vt8500: remove mach/memory.h
  ARM: mach-s5pc100: remove mach/memory.h
  ARM: mach-tegra: remove mach/memory.h
  ARM: plat-tcc: remove mach/memory.h
  ARM: mach-mmp: remove mach/memory.h
  ARM: mach-cns3xxx: remove mach/memory.h
  ...
Fix up mostly pretty trivial conflicts in:
 - arch/arm/Kconfig
 - arch/arm/include/asm/localtimer.h
 - arch/arm/kernel/Makefile
 - arch/arm/mach-shmobile/board-ap4evb.c
 - arch/arm/mach-u300/core.c
 - arch/arm/mm/dma-mapping.c
 - arch/arm/mm/proc-v7.S
 - arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
          this feature (eg, building a kernel for a single machine) and
          you need to shrink the kernel to the minimal size.
  
+ config NEED_MACH_MEMORY_H
+       bool
+       help
+         Select this when mach/memory.h is required to provide special
+         definitions for this platform.  The need for mach/memory.h should
+         be avoided when possible.
+ 
+ config PHYS_OFFSET
+       hex "Physical address of main memory"
+       depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+       help
+         Please provide the physical address corresponding to the
+         location of main memory in your system.
  
 +config GENERIC_BUG
 +      def_bool y
 +      depends on BUG
 +
  source "init/Kconfig"
  
  source "kernel/Kconfig.freezer"
        select CPU_SA110
        select FOOTBRIDGE
        select GENERIC_CLOCKEVENTS
 +      select HAVE_IDE
+       select NEED_MACH_MEMORY_H
        help
          Support for systems based on the DC21285 companion chip
          ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
        select NO_IOPORT
        select ARCH_SPARSEMEM_ENABLE
        select ARCH_USES_GETTIMEOFFSET
 +      select HAVE_IDE
+       select NEED_MACH_MEMORY_H
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
        select HAVE_SCHED_CLOCK
        select TICK_ONESHOT
        select ARCH_REQUIRE_GPIOLIB
 +      select HAVE_IDE
+       select NEED_MACH_MEMORY_H
        help
          Support for StrongARM 11x0 based boards.
  
        select CLKDEV_LOOKUP
        select HAVE_MACH_CLKDEV
        select GENERIC_GPIO
 +      select ARCH_REQUIRE_GPIOLIB
+       select NEED_MACH_MEMORY_H
        help
          Support for ST-Ericsson U300 series mobile platforms.
  
 
  #ifndef __ASM_ARM_LOCALTIMER_H
  #define __ASM_ARM_LOCALTIMER_H
  
 +#include <linux/errno.h>
+ #include <linux/interrupt.h>
  
  struct clock_event_device;
  
 
  obj-$(CONFIG_ARTHUR)          += arthur.o
  obj-$(CONFIG_ISA_DMA)         += dma-isa.o
  obj-$(CONFIG_PCI)             += bios32.o isa.o
- obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o
 -obj-$(CONFIG_PM_SLEEP)                += sleep.o suspend.o
++obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
  obj-$(CONFIG_HAVE_SCHED_CLOCK)        += sched_clock.o
  obj-$(CONFIG_SMP)             += smp.o smp_tlb.o
  obj-$(CONFIG_HAVE_ARM_SCU)    += smp_scu.o
 
         * This allows debug messages to be output
         * via a serial console before paging_init.
         */
-       addruart r7, r3
+       addruart r7, r3, r0
  
 -      mov     r3, r3, lsr #20
 -      mov     r3, r3, lsl #2
 +      mov     r3, r3, lsr #SECTION_SHIFT
 +      mov     r3, r3, lsl #PMD_ORDER
  
        add     r0, r4, r3
        rsb     r3, r3, #0x4000                 @ PTRS_PER_PGD*sizeof(long)
 
  }
  
  /* Setup the local clock events for a CPU */
 -void __cpuinit local_timer_setup(struct clock_event_device *evt)
 +int __cpuinit local_timer_setup(struct clock_event_device *evt)
  {
        exynos4_mct_tick_init(evt);
 +
 +      return 0;
  }
  
- int local_timer_ack(void)
+ void local_timer_stop(struct clock_event_device *evt)
  {
-       return 0;
+       evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+       disable_irq(evt->irq);
  }
  
  #endif /* CONFIG_LOCAL_TIMERS */
 
  #include <linux/leds.h>
  #include <linux/input/sh_keysc.h>
  #include <linux/usb/r8a66597.h>
 +#include <linux/pm_clock.h>
+ #include <linux/dma-mapping.h>
  
  #include <media/sh_mobile_ceu.h>
  #include <media/sh_mobile_csi2.h>
 
  #include <linux/err.h>
  #include <linux/mtd/nand.h>
  #include <linux/mtd/fsmc.h>
 +#include <linux/pinctrl/machine.h>
 +#include <linux/pinctrl/pinmux.h>
+ #include <linux/dma-mapping.h>
  
  #include <asm/types.h>
  #include <asm/setup.h>
 
  }
  
  #ifdef CONFIG_MMU
- /* Sanity check size */
- #if (CONSISTENT_DMA_SIZE % SZ_2M)
- #error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
- #endif
  
- #define CONSISTENT_OFFSET(x)  (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
- #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT)
- #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT)
 -
+ #define CONSISTENT_OFFSET(x)  (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
 -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT)
++#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
  
  /*
   * These are the page tables (2MB each) covering uncached, DMA consistent allocations
 
  
  /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
  .globl        cpu_v7_suspend_size
- .equ  cpu_v7_suspend_size, 4 * 9
+ .equ  cpu_v7_suspend_size, 4 * 7
 -#ifdef CONFIG_PM_SLEEP
 +#ifdef CONFIG_ARM_CPU_SUSPEND
  ENTRY(cpu_v7_do_suspend)
-       stmfd   sp!, {r4 - r11, lr}
+       stmfd   sp!, {r4 - r10, lr}
        mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
-       mrc     p15, 0, r5, c13, c0, 1  @ Context ID
-       mrc     p15, 0, r6, c13, c0, 3  @ User r/o thread ID
-       stmia   r0!, {r4 - r6}
+       mrc     p15, 0, r5, c13, c0, 3  @ User r/o thread ID
+       stmia   r0!, {r4 - r5}
        mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
-       mrc     p15, 0, r7, c2, c0, 0   @ TTB 0
-       mrc     p15, 0, r8, c2, c0, 1   @ TTB 1
-       mrc     p15, 0, r9, c1, c0, 0   @ Control register
-       mrc     p15, 0, r10, c1, c0, 1  @ Auxiliary control register
-       mrc     p15, 0, r11, c1, c0, 2  @ Co-processor access control
-       stmia   r0, {r6 - r11}
-       ldmfd   sp!, {r4 - r11, pc}
+       mrc     p15, 0, r7, c2, c0, 1   @ TTB 1
+       mrc     p15, 0, r8, c1, c0, 0   @ Control register
+       mrc     p15, 0, r9, c1, c0, 1   @ Auxiliary control register
+       mrc     p15, 0, r10, c1, c0, 2  @ Co-processor access control
+       stmia   r0, {r6 - r10}
+       ldmfd   sp!, {r4 - r10, pc}
  ENDPROC(cpu_v7_do_suspend)
  
  ENTRY(cpu_v7_do_resume)
 
        select CLKDEV_LOOKUP
        select CLKSRC_MMIO
        select GENERIC_IRQ_CHIP
 +      select HAVE_IDE
+       select NEED_MACH_MEMORY_H
        help
          "Systems based on omap7xx, omap15xx or omap16xx"