L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
-F: drivers/phy/hisilicon/phy-kirin970-usb3.c
+F: drivers/phy/hisilicon/phy-hi3670-usb3.c
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
status = "okay";
extcon = <&usb2_id>;
- usb@7600000 {
+ dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
status = "okay";
extcon = <&usb3_id>;
- usb@6a00000 {
+ dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
- dwc_0: usb@8a00000 {
+ dwc_0: dwc3@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
- dwc_1: usb@8c00000 {
+ dwc_1: dwc3@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- usb@6a00000 {
+ dwc3@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
- usb@7600000 {
+ dwc3@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
resets = <&gcc GCC_USB_30_BCR>;
- usb3_dwc3: usb@a800000 {
+ usb3_dwc3: dwc3@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
&usb3 {
status = "okay";
- usb@7580000 {
+ dwc3@7580000 {
dr_mode = "host";
};
};
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
- usb@7580000 {
+ dwc3@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
- usb@78c0000 {
+ dwc3@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: usb@a600000 {
+ usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: usb@a600000 {
+ usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: usb@a800000 {
+ usb_2_dwc3: dwc3@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: usb@a600000 {
+ usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
};
/* --- WWAN framework integration --- */
-#ifdef CONFIG_WWAN
+#ifdef CONFIG_WWAN_CORE
static int wdm_wwan_port_start(struct wwan_port *port)
{
struct wdm_device *desc = wwan_port_get_drvdata(port);
/* inbuf has been copied, it is safe to check for outstanding data */
schedule_work(&desc->service_outs_intr);
}
-#else /* CONFIG_WWAN */
+#else /* CONFIG_WWAN_CORE */
static void wdm_wwan_init(struct wdm_device *desc) {}
static void wdm_wwan_deinit(struct wdm_device *desc) {}
static void wdm_wwan_rx(struct wdm_device *desc, int length) {}
-#endif /* CONFIG_WWAN */
+#endif /* CONFIG_WWAN_CORE */
/* --- error handling --- */
static void wdm_rxwork(struct work_struct *work)
"wIndex=%04x wLength=%04x\n",
ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
ctrl->wIndex, ctrl->wLength);
- if (ctrl->bRequestType & 0x80) {
+ if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
pipe = usb_rcvctrlpipe(dev, 0);
snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
+#define USB_PING_RESPONSE_TIME 400 /* ns */
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
}
/*
- * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
- * either U1 or U2.
+ * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * U1/U2, send a PING to the device and receive a PING_RESPONSE.
+ * See USB 3.1 section C.1.5.2
*/
static void usb_set_lpm_mel(struct usb_device *udev,
struct usb3_lpm_parameters *udev_lpm_params,
unsigned int hub_exit_latency)
{
unsigned int total_mel;
- unsigned int device_mel;
- unsigned int hub_mel;
/*
- * Calculate the time it takes to transition all links from the roothub
- * to the parent hub into U0. The parent hub must then decode the
- * packet (hub header decode latency) to figure out which port it was
- * bound for.
- *
- * The Hub Header decode latency is expressed in 0.1us intervals (0x1
- * means 0.1us). Multiply that by 100 to get nanoseconds.
+ * tMEL1. time to transition path from host to device into U0.
+ * MEL for parent already contains the delay up to parent, so only add
+ * the exit latency for the last link (pick the slower exit latency),
+ * and the hub header decode latency. See USB 3.1 section C 2.2.1
+ * Store MEL in nanoseconds
*/
total_mel = hub_lpm_params->mel +
- (hub->descriptor->u.ss.bHubHdrDecLat * 100);
+ max(udev_exit_latency, hub_exit_latency) * 1000 +
+ hub->descriptor->u.ss.bHubHdrDecLat * 100;
/*
- * How long will it take to transition the downstream hub's port into
- * U0? The greater of either the hub exit latency or the device exit
- * latency.
- *
- * The BOS U1/U2 exit latencies are expressed in 1us intervals.
- * Multiply that by 1000 to get nanoseconds.
+ * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for
+ * each link + wHubDelay for each hub. Add only for last link.
+ * tMEL4, the time for PING_RESPONSE to traverse upstream is similar.
+ * Multiply by 2 to include it as well.
*/
- device_mel = udev_exit_latency * 1000;
- hub_mel = hub_exit_latency * 1000;
- if (device_mel > hub_mel)
- total_mel += device_mel;
- else
- total_mel += hub_mel;
+ total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) +
+ USB_TP_TRANSMISSION_DELAY) * 2;
+
+ /*
+ * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE
+ * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4
+ * to cover the delay if the PING_RESPONSE is queued behind a Max Packet
+ * Size DP.
+ * Note these delays should be added only once for the entire path, so
+ * add them to the MEL of the device connected to the roothub.
+ */
+ if (!hub->hdev->parent)
+ total_mel += USB_PING_RESPONSE_TIME + 2100;
udev_lpm_params->mel = total_mel;
}
return 0;
}
+/*
+ * Don't allow device intiated U1/U2 if the system exit latency + one bus
+ * interval is greater than the minimum service interval of any active
+ * periodic endpoint. See USB 3.2 section 9.4.9
+ */
+static bool usb_device_may_initiate_lpm(struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ unsigned int sel; /* us */
+ int i, j;
+
+ if (state == USB3_LPM_U1)
+ sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+ else if (state == USB3_LPM_U2)
+ sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+ else
+ return false;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_endpoint_descriptor *desc;
+ unsigned int interval;
+
+ intf = udev->actconfig->interface[i];
+ if (!intf)
+ continue;
+
+ for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) {
+ desc = &intf->cur_altsetting->endpoint[j].desc;
+
+ if (usb_endpoint_xfer_int(desc) ||
+ usb_endpoint_xfer_isoc(desc)) {
+ interval = (1 << (desc->bInterval - 1)) * 125;
+ if (sel + 125 > interval)
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
/*
* Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
* U1/U2 entry.
* U1/U2_ENABLE
*/
if (udev->actconfig &&
- usb_set_device_initiated_lpm(udev, state, true) == 0) {
- if (state == USB3_LPM_U1)
- udev->usb3_lpm_u1_enabled = 1;
- else if (state == USB3_LPM_U2)
- udev->usb3_lpm_u2_enabled = 1;
- } else {
- /* Don't request U1/U2 entry if the device
- * cannot transition to U1/U2.
- */
- usb_set_lpm_timeout(udev, state, 0);
- hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ usb_device_may_initiate_lpm(udev, state)) {
+ if (usb_set_device_initiated_lpm(udev, state, true)) {
+ /*
+ * Request to enable device initiated U1/U2 failed,
+ * better to turn off lpm in this case.
+ */
+ usb_set_lpm_timeout(udev, state, 0);
+ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ return;
+ }
}
-}
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 1;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 1;
+}
/*
* Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
* U1/U2 entry.
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
- /* Fibocom L850-GL LTE Modem */
- { USB_DEVICE(0x2cb7, 0x0007), .driver_info =
- USB_QUIRK_IGNORE_REMOTE_WAKEUP },
-
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
* 0 - No (default)
* 1 - Partial power down
* 2 - Hibernation
+ * @no_clock_gating: Specifies whether to avoid clock gating feature.
+ * 0 - No (use clock gating)
+ * 1 - Yes (avoid it)
* @lpm: Enable LPM support.
* 0 - No
* 1 - Yes
#define DWC2_POWER_DOWN_PARAM_NONE 0
#define DWC2_POWER_DOWN_PARAM_PARTIAL 1
#define DWC2_POWER_DOWN_PARAM_HIBERNATION 2
+ bool no_clock_gating;
bool lpm;
bool lpm_clock_gating;
* If neither hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- dwc2_gadget_enter_clock_gating(hsotg);
+ if (!hsotg->params.no_clock_gating)
+ dwc2_gadget_enter_clock_gating(hsotg);
}
/*
return;
}
- /* Zlp for all endpoints, for ep0 only in DATA IN stage */
+ /* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */
if (hs_ep->send_zlp) {
- dwc2_hsotg_program_zlp(hsotg, hs_ep);
hs_ep->send_zlp = 0;
- /* transfer will be completed on next complete interrupt */
- return;
+ if (!using_desc_dma(hsotg)) {
+ dwc2_hsotg_program_zlp(hsotg, hs_ep);
+ /* transfer will be completed on next complete interrupt */
+ return;
+ }
}
if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {
__func__);
}
} else {
+ /* Mask GINTSTS_GOUTNAKEFF interrupt */
+ dwc2_hsotg_disable_gsint(hsotg, GINTSTS_GOUTNAKEFF);
+
if (!(dwc2_readl(hsotg, GINTSTS) & GINTSTS_GOUTNAKEFF))
dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK);
+ if (!using_dma(hsotg)) {
+ /* Wait for GINTSTS_RXFLVL interrupt */
+ if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
+ GINTSTS_RXFLVL, 100)) {
+ dev_warn(hsotg->dev, "%s: timeout GINTSTS.RXFLVL\n",
+ __func__);
+ } else {
+ /*
+ * Pop GLOBAL OUT NAK status packet from RxFIFO
+ * to assert GOUTNAKEFF interrupt
+ */
+ dwc2_readl(hsotg, GRXSTSP);
+ }
+ }
+
/* Wait for global nak to take effect */
if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
GINTSTS_GOUTNAKEFF, 100))
epctl = dwc2_readl(hs, epreg);
if (value) {
+ /* Unmask GOUTNAKEFF interrupt */
+ dwc2_hsotg_en_gsint(hs, GINTSTS_GOUTNAKEFF);
+
if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF))
dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK);
// STALL bit will be set in GOUTNAKEFF interrupt handler
* If not hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- dwc2_host_enter_clock_gating(hsotg);
+ if (!hsotg->params.no_clock_gating)
+ dwc2_host_enter_clock_gating(hsotg);
break;
}
* If not hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- dwc2_host_enter_clock_gating(hsotg);
+ if (!hsotg->params.no_clock_gating)
+ dwc2_host_enter_clock_gating(hsotg);
/* After entering suspend, hardware is not accessible */
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
struct dwc2_core_params *p = &hsotg->params;
p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+ p->no_clock_gating = true;
p->phy_utmi_width = 8;
}
unsigned dis_metastability_quirk:1;
unsigned dis_split_quirk:1;
+ unsigned async_callbacks:1;
u16 imod_interval;
};
static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
- int ret;
+ int ret = -EINVAL;
- spin_unlock(&dwc->lock);
- ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
- spin_lock(&dwc->lock);
+ if (dwc->async_callbacks) {
+ spin_unlock(&dwc->lock);
+ ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
+ spin_lock(&dwc->lock);
+ }
return ret;
}
return ret;
}
+static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc->async_callbacks = enable;
+ spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
.udc_set_ssp_rate = dwc3_gadget_set_ssp_rate,
.get_config_params = dwc3_gadget_config_params,
.vbus_draw = dwc3_gadget_vbus_draw,
+ .udc_async_callbacks = dwc3_gadget_async_callbacks,
};
/* -------------------------------------------------------------------------- */
static void dwc3_disconnect_gadget(struct dwc3 *dwc)
{
- if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
+ if (dwc->async_callbacks && dwc->gadget_driver->disconnect) {
spin_unlock(&dwc->lock);
dwc->gadget_driver->disconnect(dwc->gadget);
spin_lock(&dwc->lock);
static void dwc3_suspend_gadget(struct dwc3 *dwc)
{
- if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
+ if (dwc->async_callbacks && dwc->gadget_driver->suspend) {
spin_unlock(&dwc->lock);
dwc->gadget_driver->suspend(dwc->gadget);
spin_lock(&dwc->lock);
static void dwc3_resume_gadget(struct dwc3 *dwc)
{
- if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ if (dwc->async_callbacks && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
if (!dwc->gadget_driver)
return;
- if (dwc->gadget->speed != USB_SPEED_UNKNOWN) {
+ if (dwc->async_callbacks && dwc->gadget->speed != USB_SPEED_UNKNOWN) {
spin_unlock(&dwc->lock);
usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver);
spin_lock(&dwc->lock);
* implemented.
*/
- if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ if (dwc->async_callbacks && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
struct gs_port *port;
mutex_lock(&ports[port_num].lock);
- if (WARN_ON(!ports[port_num].port)) {
+ if (!ports[port_num].port) {
mutex_unlock(&ports[port_num].lock);
return;
}
return 0;
free_eps:
+ pm_runtime_disable(&pdev->dev);
tegra_xudc_free_eps(xudc);
free_event_ring:
tegra_xudc_free_event_ring(xudc);
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 status, masked_status, pcd_status = 0, cmd;
+ u32 status, current_status, masked_status, pcd_status = 0;
+ u32 cmd;
int bh;
spin_lock(&ehci->lock);
- status = ehci_readl(ehci, &ehci->regs->status);
+ status = 0;
+ current_status = ehci_readl(ehci, &ehci->regs->status);
+restart:
/* e.g. cardbus physical eject */
- if (status == ~(u32) 0) {
+ if (current_status == ~(u32) 0) {
ehci_dbg (ehci, "device removed\n");
goto dead;
}
+ status |= current_status;
/*
* We don't use STS_FLR, but some controllers don't like it to
* remain on, so mask it out along with the other status bits.
*/
- masked_status = status & (INTR_MASK | STS_FLR);
+ masked_status = current_status & (INTR_MASK | STS_FLR);
/* Shared IRQ? */
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
/* clear (just) interrupts */
ehci_writel(ehci, masked_status, &ehci->regs->status);
+
+ /* For edge interrupts, don't race with an interrupt bit being raised */
+ current_status = ehci_readl(ehci, &ehci->regs->status);
+ if (current_status & INTR_MASK)
+ goto restart;
+
cmd = ehci_readl(ehci, &ehci->regs->command);
bh = 0;
*/
struct urb *curr_urb;
enum scheduling_pass sched_pass;
- struct usb_device *loaded_dev; /* dev that's loaded into the chip */
- int loaded_epnum; /* epnum whose toggles are loaded */
int urb_done; /* > 0 -> no errors, < 0: errno */
size_t curr_len;
u8 hien;
* Caller must NOT hold HCD spinlock.
*/
static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
- int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
{
- struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
- int old_epnum, same_ep, rcvtog, sndtog;
- struct usb_device *old_dev;
+ int rcvtog, sndtog;
u8 hctl;
- old_dev = max3421_hcd->loaded_dev;
- old_epnum = max3421_hcd->loaded_epnum;
-
- same_ep = (dev == old_dev && epnum == old_epnum);
- if (same_ep && !force_toggles)
- return;
-
- if (old_dev && !same_ep) {
- /* save the old end-points toggles: */
- u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
- rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
- sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
- /* no locking: HCD (i.e., we) own toggles, don't we? */
- usb_settoggle(old_dev, old_epnum, 0, rcvtog);
- usb_settoggle(old_dev, old_epnum, 1, sndtog);
- }
/* setup new endpoint's toggle bits: */
rcvtog = usb_gettoggle(dev, epnum, 0);
sndtog = usb_gettoggle(dev, epnum, 1);
hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
- max3421_hcd->loaded_epnum = epnum;
spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
/*
* address-assignment so it's best to just always load the
* address whenever the end-point changed/was forced.
*/
- max3421_hcd->loaded_dev = dev;
spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
}
struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
struct urb *urb, *curr_urb = NULL;
struct max3421_ep *max3421_ep;
- int epnum, force_toggles = 0;
+ int epnum;
struct usb_host_endpoint *ep;
struct list_head *pos;
unsigned long flags;
usb_settoggle(urb->dev, epnum, 0, 1);
usb_settoggle(urb->dev, epnum, 1, 1);
max3421_ep->pkt_state = PKT_STATE_SETUP;
- force_toggles = 1;
} else
max3421_ep->pkt_state = PKT_STATE_TRANSFER;
}
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
max3421_ep->last_active = max3421_hcd->frame_number;
- max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+ max3421_set_address(hcd, urb->dev, epnum);
max3421_set_speed(hcd, urb->dev);
max3421_next_transfer(hcd, 0);
return 1;
status = 0;
urb = max3421_hcd->curr_urb;
if (urb) {
+ /* save the old end-points toggles: */
+ u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+ int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+ int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+ int epnum = usb_endpoint_num(&urb->ep->desc);
+
+ /* no locking: HCD (i.e., we) own toggles, don't we? */
+ usb_settoggle(urb->dev, epnum, 0, rcvtog);
+ usb_settoggle(urb->dev, epnum, 1, sndtog);
+
max3421_hcd->curr_urb = NULL;
spin_lock_irqsave(&max3421_hcd->lock, flags);
usb_hcd_unlink_urb_from_ep(hcd, urb);
* Inform the usbcore about resume-in-progress by returning
* a non-zero value even if there are no status changes.
*/
+ spin_lock_irqsave(&xhci->lock, flags);
+
status = bus_state->resuming_ports;
mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
- spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
temp = readl(ports[i]->addr);
return 0;
case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */
- dev_dbg(&pdev->dev, "Unknown ROM status ...\n");
- break;
+ return 0;
case RENESAS_ROM_STATUS_ERROR: /* Error State */
default: /* All other states are marked as "Reserved states" */
u8 fw_state;
int err;
- /*
- * Only if device has ROM and loaded FW we can skip loading and
- * return success. Otherwise (even unknown state), attempt to load FW.
- */
- if (renesas_check_rom(pdev) && !renesas_check_rom_state(pdev))
- return 0;
+ /* Check if device has ROM and loaded, if so skip everything */
+ err = renesas_check_rom(pdev);
+ if (err) { /* we have rom */
+ err = renesas_check_rom_state(pdev);
+ if (!err)
+ return err;
+ }
/*
* Test if the device is actually needing the firmware. As most
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/*
+ * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
+ * load firmware, so don't encumber the xhci-pci driver with it.
+ */
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
MODULE_FIRMWARE("renesas_usb_fw.mem");
+#endif
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
list_for_each_entry(usb_phy, &phy_list, head) {
if (usb_phy->dev == dev)
- break;
+ return usb_phy;
}
- return usb_phy;
+ return NULL;
}
static void usb_phy_set_default_current(struct usb_phy *usb_phy)
struct usb_phy *usb_phy;
char uchger_state[50] = { 0 };
char uchger_type[50] = { 0 };
+ unsigned long flags;
+ spin_lock_irqsave(&phy_lock, flags);
usb_phy = __device_to_usb_phy(dev);
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ if (!usb_phy)
+ return -ENODEV;
snprintf(uchger_state, ARRAY_SIZE(uchger_state),
"USB_CHARGER_STATE=%s", usb_chger_state[usb_phy->chg_state]);
#define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1)
#define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0)
static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
{
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
if (chan) {
dmaengine_terminate_all(chan);
usbhsf_dma_unmap(pkt);
+ } else {
+ if (usbhs_pipe_is_dir_in(pipe))
+ usbhsf_rx_irq_ctrl(pipe, 0);
+ else
+ usbhsf_tx_irq_ctrl(pipe, 0);
}
usbhs_pipe_clear_without_sequence(pipe, 0, 0);
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+/* Reported-by: Julian Sikorski <belegdol@gmail.com> */
+UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
+ "LaCie",
+ "Rugged USB3-FW",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/*
* Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
* commands in UAS mode. Observed with the 1.28 firmware; are there others?
if (!fwnode)
return -ENODEV;
+ /*
+ * This fwnode has a "compatible" property, but is never populated as a
+ * struct device. Instead we simply parse it to read the properties.
+ * This it breaks fw_devlink=on. To maintain backward compatibility
+ * with existing DT files, we work around this by deleting any
+ * fwnode_links to/from this fwnode.
+ */
+ fw_devlink_purge_absent_suppliers(fwnode);
+
/*
* When both VDD and VSYS power supplies are present, the low power
* supply VSYS is selected when VSYS voltage is above 3.1 V.
typec_set_pwr_opmode(chip->port, chip->pwr_opmode);
if (client->irq) {
- ret = stusb160x_irq_init(chip, client->irq);
- if (ret)
- goto port_unregister;
-
chip->role_sw = fwnode_usb_role_switch_get(fwnode);
if (IS_ERR(chip->role_sw)) {
ret = PTR_ERR(chip->role_sw);
ret);
goto port_unregister;
}
+
+ ret = stusb160x_irq_init(chip, client->irq);
+ if (ret)
+ goto role_sw_put;
} else {
/*
* If Source or Dual power role, need to enable VDD supply
return 0;
+role_sw_put:
+ if (chip->role_sw)
+ usb_role_switch_put(chip->role_sw);
port_unregister:
typec_unregister_port(chip->port);
all_reg_disable:
if (!fwnode)
return -ENODEV;
+ /*
+ * This fwnode has a "compatible" property, but is never populated as a
+ * struct device. Instead we simply parse it to read the properties.
+ * This breaks fw_devlink=on. To maintain backward compatibility
+ * with existing DT files, we work around this by deleting any
+ * fwnode_links to/from this fwnode.
+ */
+ fw_devlink_purge_absent_suppliers(fwnode);
+
tps->role_sw = fwnode_usb_role_switch_get(fwnode);
if (IS_ERR(tps->role_sw)) {
ret = PTR_ERR(tps->role_sw);
projects / linux-2.6-microblaze.git / commitdiff