drm/i915/dsi: Remove readback of panel orientation on BYT / CHT
authorHans de Goede <hdegoede@redhat.com>
Fri, 28 Feb 2020 11:41:09 +0000 (12:41 +0100)
committerHans de Goede <hdegoede@redhat.com>
Mon, 2 Mar 2020 13:01:42 +0000 (14:01 +0100)
Commit 82daca297506 ("drm/i915: Add "panel orientation" property to the
panel connector, v6.") uses hardware state readback to determine if the
GOP is rotating the image by 180 degrees to compensate for upside-down
mounted panels.

When I wrote that commit I tried to find the VBT bits the GOP used to
decide to rotate the image, but I could not find them. Back then I only
looked at the rotation bits in struct mipi_config and these read 0 on
the 1 BYT device I have with an upside-down mounted panel
(a GP-electronic T701 tablet). While working on a similar problem on a
BYT device with an eDP panel I noticed that the new
intel_dsi_get_panel_orientation() helper which gets used on newer
SoCs (Apollo-Lake, etc.) checks the rotate_180 bit in the
BDB_GENERAL_FEATURES VBT block.

I've checked and this bit indeed is set on the GP-electronic T701 tablet,
so using the generic intel_dsi_get_panel_orientation() helper there does
the right thing without needing any extra readback of hw state.

This commit removes the special handling of the panel orientation for
DSI panels on BYT/CHT devices, bringing the handling in line with the
handling of DSI panels on other devices.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-2-hdegoede@redhat.com
drivers/gpu/drm/i915/display/vlv_dsi.c

index d07cfad..f4c362d 100644 (file)
@@ -1591,59 +1591,6 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
        .atomic_duplicate_state = intel_digital_connector_duplicate_state,
 };
 
-static enum drm_panel_orientation
-vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
-{
-       struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
-       struct intel_encoder *encoder = intel_attached_encoder(connector);
-       enum intel_display_power_domain power_domain;
-       enum drm_panel_orientation orientation;
-       struct intel_plane *plane;
-       struct intel_crtc *crtc;
-       intel_wakeref_t wakeref;
-       enum pipe pipe;
-       u32 val;
-
-       if (!encoder->get_hw_state(encoder, &pipe))
-               return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
-
-       crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
-       plane = to_intel_plane(crtc->base.primary);
-
-       power_domain = POWER_DOMAIN_PIPE(pipe);
-       wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
-       if (!wakeref)
-               return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
-
-       val = intel_de_read(dev_priv, DSPCNTR(plane->i9xx_plane));
-
-       if (!(val & DISPLAY_PLANE_ENABLE))
-               orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
-       else if (val & DISPPLANE_ROTATE_180)
-               orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
-       else
-               orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
-
-       intel_display_power_put(dev_priv, power_domain, wakeref);
-
-       return orientation;
-}
-
-static enum drm_panel_orientation
-vlv_dsi_get_panel_orientation(struct intel_connector *connector)
-{
-       struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
-       enum drm_panel_orientation orientation;
-
-       if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
-               orientation = vlv_dsi_get_hw_panel_orientation(connector);
-               if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
-                       return orientation;
-       }
-
-       return intel_dsi_get_panel_orientation(connector);
-}
-
 static void vlv_dsi_add_properties(struct intel_connector *connector)
 {
        struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
@@ -1662,7 +1609,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
                drm_connector_set_panel_orientation_with_quirk(
                                &connector->base,
-                               vlv_dsi_get_panel_orientation(connector),
+                               intel_dsi_get_panel_orientation(connector),
                                connector->panel.fixed_mode->hdisplay,
                                connector->panel.fixed_mode->vdisplay);
        }