pm8001_ha->dev);
if (ret) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk(
- "Failed to load firmware image file %s, error %d\n",
- filename_ptr, ret));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Failed to load firmware image file %s, error %d\n",
+ filename_ptr, ret);
pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE;
goto out;
}
} while ((regVal != shiftValue) && time_before(jiffies, start));
if (regVal != shiftValue) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
- " = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT,
+ "TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW = 0x%x\n",
+ regVal);
return -1;
}
return 0;
value = pm8001_cr32(pm8001_ha, 0, 0x44);
offset = value & 0x03FFFFFF;
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 Offset: %x\n", offset));
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 Offset: %x\n", offset);
pcilogic = (value & 0xFC000000) >> 26;
pcibar = get_pci_bar_index(pcilogic);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
pm8001_ha->general_stat_tbl_addr =
* as this is shared with BIOS data */
if (deviceid == 0x8081 || deviceid == 0x0042) {
if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- GSM_SM_BASE));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE);
return -1;
}
}
/* check the firmware status */
if (-1 == check_fw_ready(pm8001_ha)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Firmware is not ready!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
return -EBUSY;
}
}
/* notify firmware update finished and check initialization status */
if (0 == mpi_init_check(pm8001_ha)) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MPI initialize successful!\n"));
+ pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
} else
return -EBUSY;
/*This register is a 16-bit timer with a resolution of 1us. This is the
pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
if (deviceid == 0x8081 || deviceid == 0x0042) {
if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- GSM_SM_BASE));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE);
return -1;
}
}
} while ((value != 0) && (--max_wait_count));
if (!max_wait_count) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=0x%x\n",
+ value);
return -1;
}
break;
} while (--max_wait_count);
if (!max_wait_count) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk(" TIME OUT MPI State = 0x%x\n",
- gst_len_mpistate & GST_MPI_STATE_MASK));
+ pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK);
return -1;
}
return 0;
{
u32 regVal, regVal1, regVal2;
if (mpi_uninit_check(pm8001_ha) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MPI state is not ready\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "MPI state is not ready\n");
return -1;
}
/* read the scratch pad 2 register bit 2 */
regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
& SCRATCH_PAD2_FWRDY_RST;
if (regVal == SCRATCH_PAD2_FWRDY_RST) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Firmware is ready for reset .\n"));
+ pm8001_dbg(pm8001_ha, INIT, "Firmware is ready for reset.\n");
} else {
unsigned long flags;
/* Trigger NMI twice via RB6 */
spin_lock_irqsave(&pm8001_ha->lock, flags);
if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- RB6_ACCESS_REG));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ RB6_ACCESS_REG);
return -1;
}
pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
if (regVal != SCRATCH_PAD2_FWRDY_RST) {
regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
- "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
- regVal1, regVal2));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MSGU_SCRATCH_PAD1=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
+ regVal1, regVal2);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
/* step1: Check FW is ready for soft reset */
if (soft_reset_ready_check(pm8001_ha) != 0) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "FW is not ready\n");
return -1;
}
spin_lock_irqsave(&pm8001_ha->lock, flags);
if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- MBIC_AAP1_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ MBIC_AAP1_ADDR_BASE);
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (IOP)= 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
/* map 0x70000 to BAR4(0x20), BAR2(win) */
if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- MBIC_IOP_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ MBIC_IOP_ADDR_BASE);
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "PCIE -Event Interrupt Enable = 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCIE - Event Interrupt = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "PCIE - Event Interrupt = 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "PCIE -Error Interrupt Enable = 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "PCIE - Error Interrupt = 0x%x\n", regVal);
pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
/* read the scratch pad 1 register bit 2 */
/* map 0x0700000 to BAR4(0x20), BAR2(win) */
if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- GSM_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE);
return -1;
}
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
- " Reset = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0(0x00007b88)-GSM Configuration and Reset = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
/* step 3: host read GSM Configuration and Reset register */
regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
regVal &= ~(0x00003b00);
/* host write GSM Configuration and Reset register */
pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
- "Configuration and Reset is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
/* step 4: */
/* disable GSM - Read Address Parity Check */
regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700038 - Read Address Parity Check "
- "Enable = 0x%x\n", regVal1));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
+ regVal1);
pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
- "is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
/* disable GSM - Write Address Parity Check */
regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700040 - Write Address Parity Check"
- " Enable = 0x%x\n", regVal2));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable = 0x%x\n",
+ regVal2);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700040 - Write Address Parity Check "
- "Enable is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
/* disable GSM - Write Data Parity Check */
regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x300048 - Write Data Parity Check"
- " Enable = 0x%x\n", regVal3));
+ pm8001_dbg(pm8001_ha, INIT, "GSM 0x300048 - Write Data Parity Check Enable = 0x%x\n",
+ regVal3);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
- "is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x300048 - Write Data Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
/* step 5: delay 10 usec */
udelay(10);
/* step 5-b: set GPIO-0 output control to tristate anyway */
if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- GPIO_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, INIT, "Shift Bar4 to 0x%x failed\n",
+ GPIO_ADDR_BASE);
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GPIO Output Control Register:"
- " = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "GPIO Output Control Register: = 0x%x\n",
+ regVal);
/* set GPIO-0 output control to tri-state */
regVal &= 0xFFFFFFFC;
pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
/* map 0x00000 to BAR4(0x20), BAR2(win) */
if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
- SPC_TOP_LEVEL_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE);
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Top Register before resetting IOP/AAP1"
- ":= 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting IOP/AAP1:= 0x%x\n",
+ regVal);
regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
/* step 7: Reset the BDMA/OSSP */
regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Top Register before resetting BDMA/OSSP"
- ": = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting BDMA/OSSP: = 0x%x\n",
+ regVal);
regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
/* step 9: bring the BDMA and OSSP out of reset */
regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Top Register before bringing up BDMA/OSSP"
- ":= 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Top Register before bringing up BDMA/OSSP:= 0x%x\n",
+ regVal);
regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
/* map 0x0700000 to BAR4(0x20), BAR2(win) */
if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
- GSM_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE);
return -1;
}
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
- "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0 (0x00007b88)-GSM Configuration and Reset = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
/* Put those bits to high */
/* GSM XCBI offset = 0x70 0000
*/
regVal |= (GSM_CONFIG_RESET_VALUE);
pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
- " Configuration and Reset is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+ pm8001_dbg(pm8001_ha, INIT, "GSM (0x00004088 ==> 0x00007b88) - GSM Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
/* step 12: Restore GSM - Read Address Parity Check */
regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
/* just for debugging */
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
- " = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
+ regVal);
pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700038 - Read Address Parity"
- " Check Enable is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT, "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
/* Restore GSM - Write Address Parity Check */
regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700040 - Write Address Parity Check"
- " Enable is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
/* Restore GSM - Write Data Parity Check */
regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
- "is set to = 0x%x\n",
- pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
/* step 13: bring the IOP and AAP1 out of reset */
/* map 0x00000 to BAR4(0x20), BAR2(win) */
if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Shift Bar4 to 0x%x failed\n",
- SPC_TOP_LEVEL_ADDR_BASE));
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE);
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
if (!max_wait_count) {
regVal = pm8001_cr32(pm8001_ha, 0,
MSGU_SCRATCH_PAD_1);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
- "MSGU_SCRATCH_PAD1 = 0x%x\n",
- toggleVal, regVal));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0,
- MSGU_SCRATCH_PAD_0)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0,
- MSGU_SCRATCH_PAD_2)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0,
- MSGU_SCRATCH_PAD_3)));
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT : ToggleVal 0x%x,MSGU_SCRATCH_PAD1 = 0x%x\n",
+ toggleVal, regVal);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD2 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3));
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
if (check_fw_ready(pm8001_ha) == -1) {
regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
/* return error if MPI Configuration Table not ready */
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("FW not ready SCRATCH_PAD1"
- " = 0x%x\n", regVal));
+ pm8001_dbg(pm8001_ha, INIT,
+ "FW not ready SCRATCH_PAD1 = 0x%x\n",
+ regVal);
regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
/* return error if MPI Configuration Table not ready */
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("FW not ready SCRATCH_PAD2"
- " = 0x%x\n", regVal));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0,
- MSGU_SCRATCH_PAD_0)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
- pm8001_cr32(pm8001_ha, 0,
- MSGU_SCRATCH_PAD_3)));
+ pm8001_dbg(pm8001_ha, INIT,
+ "FW not ready SCRATCH_PAD2 = 0x%x\n",
+ regVal);
+ pm8001_dbg(pm8001_ha, INIT,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, INIT,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3));
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
pm8001_bar4_shift(pm8001_ha, 0);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SPC soft reset Complete\n"));
+ pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
return 0;
}
{
u32 i;
u32 regVal;
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("chip reset start\n"));
+ pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
/* do SPC chip reset. */
regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
mdelay(1);
} while ((--i) != 0);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("chip reset finished\n"));
+ pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
}
/**
rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
&pMessage);
if (rv < 0) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("No free mpi buffer\n"));
+ pm8001_dbg(pm8001_ha, IO, "No free mpi buffer\n");
rv = -ENOMEM;
goto done;
}
/*Update the PI to the firmware*/
pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
circularQ->pi_offset, circularQ->producer_idx);
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
- responseQueue, opCode, circularQ->producer_idx,
- circularQ->consumer_index));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
+ responseQueue, opCode, circularQ->producer_idx,
+ circularQ->consumer_index);
done:
spin_unlock_irqrestore(&circularQ->iq_lock, flags);
return rv;
pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
circularQ->consumer_idx * pm8001_ha->iomb_size);
if (pOutBoundMsgHeader != msgHeader) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("consumer_idx = %d msgHeader = %p\n",
- circularQ->consumer_idx, msgHeader));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "consumer_idx = %d msgHeader = %p\n",
+ circularQ->consumer_idx, msgHeader);
/* Update the producer index from SPC */
producer_index = pm8001_read_32(circularQ->pi_virt);
circularQ->producer_index = cpu_to_le32(producer_index);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("consumer_idx = %d producer_index = %d"
- "msgHeader = %p\n", circularQ->consumer_idx,
- circularQ->producer_index, msgHeader));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "consumer_idx = %d producer_index = %dmsgHeader = %p\n",
+ circularQ->consumer_idx,
+ circularQ->producer_index, msgHeader);
return 0;
}
/* free the circular queue buffer elements associated with the message*/
/* Update the producer index from SPC*/
producer_index = pm8001_read_32(circularQ->pi_virt);
circularQ->producer_index = cpu_to_le32(producer_index);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
- circularQ->producer_index));
+ pm8001_dbg(pm8001_ha, IO, " CI=%d PI=%d\n",
+ circularQ->consumer_idx, circularQ->producer_index);
return 0;
}
/* read header */
header_tmp = pm8001_read_32(msgHeader);
msgHeader_tmp = cpu_to_le32(header_tmp);
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "outbound opcode msgheader:%x ci=%d pi=%d\n",
- msgHeader_tmp, circularQ->consumer_idx,
- circularQ->producer_index));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "outbound opcode msgheader:%x ci=%d pi=%d\n",
+ msgHeader_tmp, circularQ->consumer_idx,
+ circularQ->producer_index);
if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) {
if (OPC_OUB_SKIP_ENTRY !=
(le32_to_cpu(msgHeader_tmp) & 0xfff)) {
sizeof(struct mpi_msg_hdr);
*pBC = (u8)((le32_to_cpu(msgHeader_tmp)
>> 24) & 0x1f);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(": CI=%d PI=%d "
- "msgHeader=%x\n",
- circularQ->consumer_idx,
- circularQ->producer_index,
- msgHeader_tmp));
+ pm8001_dbg(pm8001_ha, IO,
+ ": CI=%d PI=%d msgHeader=%x\n",
+ circularQ->consumer_idx,
+ circularQ->producer_index,
+ msgHeader_tmp);
return MPI_IO_STATUS_SUCCESS;
} else {
circularQ->consumer_idx =
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags1);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p"
- " done with event 0x%x resp 0x%x stat 0x%x but"
- " aborted by upper layer!\n",
- t, pw->handler, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, pw->handler, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
} else {
unsigned long flags, flags1;
int i, ret = 0;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ret = pm8001_query_task(t);
- PM8001_IO_DBG(pm8001_ha,
- switch (ret) {
- case TMF_RESP_FUNC_SUCC:
- pm8001_printk("...Task on lu\n");
- break;
-
- case TMF_RESP_FUNC_COMPLETE:
- pm8001_printk("...Task NOT on lu\n");
- break;
-
- default:
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "...query task failed!!!\n"));
- break;
- });
+ if (ret == TMF_RESP_FUNC_SUCC)
+ pm8001_dbg(pm8001_ha, IO, "...Task on lu\n");
+ else if (ret == TMF_RESP_FUNC_COMPLETE)
+ pm8001_dbg(pm8001_ha, IO, "...Task NOT on lu\n");
+ else
+ pm8001_dbg(pm8001_ha, DEVIO, "...query task failed!!!\n");
spin_lock_irqsave(&pm8001_ha->lock, flags);
break;
default: /* device misbehavior */
ret = TMF_RESP_FUNC_FAILED;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("...Reset phy\n"));
+ pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
pm8001_I_T_nexus_reset(dev);
break;
}
default: /* device misbehavior */
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
ret = TMF_RESP_FUNC_FAILED;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("...Reset phy\n"));
+ pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
pm8001_I_T_nexus_reset(dev);
}
if (ret == TMF_RESP_FUNC_FAILED)
t = NULL;
pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev);
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n"));
+ pm8001_dbg(pm8001_ha, IO, "...Complete\n");
} break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
dev = pm8001_dev->sas_device;
int ret;
if (!pm8001_ha_dev) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "dev is null\n");
return;
}
task = sas_alloc_slow_task(GFP_ATOMIC);
if (!task) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
- "allocate task\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
return;
}
task = sas_alloc_slow_task(GFP_ATOMIC);
if (!task) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("cannot allocate task !!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
return;
}
task->task_done = pm8001_task_done;
res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
if (res) {
sas_free_task(task);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("cannot allocate tag !!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate tag !!!\n");
return;
}
if (!dev) {
sas_free_task(task);
pm8001_tag_free(pm8001_ha, ccb_tag);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Domain device cannot be allocated\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Domain device cannot be allocated\n");
return;
}
task->dev = dev;
t = ccb->task;
if (status && status != IO_UNDERFLOW)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sas IO status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
/* Print sas address of IO failed device */
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
(status != IO_UNDERFLOW))
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive:"
- "%016llx", SAS_ADDR(t->dev->sas_addr)));
+ pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
if (status)
- PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
- "status:0x%x, tag:0x%x, task:0x%p\n",
- status, tag, t));
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task:0x%p\n",
+ status, tag, t);
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
- ",param = %d\n", param));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS,param = %d\n",
+ param);
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
break;
case IO_UNDERFLOW:
/* SSP Completion with error */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
- ",param = %d\n", param));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW,param = %d\n",
+ param);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
/* Force the midlayer to retry */
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
- "NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_ERROR_DMA:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (!t->uldd_task)
IO_DS_NON_OPERATIONAL);
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_TM_TAG_NOT_FOUND:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
break;
}
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("scsi_status = %x\n ",
- psspPayload->ssp_resp_iu.status));
+ pm8001_dbg(pm8001_ha, IO, "scsi_status = %x\n",
+ psspPayload->ssp_resp_iu.status);
spin_lock_irqsave(&t->task_state_lock, flags);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
- " io_status 0x%x resp 0x%x "
- "stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
t = ccb->task;
pm8001_dev = ccb->device;
if (event)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sas IO status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("port_id = %x,device_id = %x\n",
- port_id, dev_id));
+ pm8001_dbg(pm8001_ha, DEVIO, "port_id = %x,device_id = %x\n",
+ port_id, dev_id);
switch (event) {
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
return;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
- "_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
- "NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
return;
case IO_XFER_ERROR_UNEXPECTED_PHASE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_RDY_OVERRUN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_CMD_FRAME_ISSUED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(" IO_XFER_CMD_FRAME_ISSUED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
return;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
- " event 0x%x resp 0x%x "
- "stat 0x%x but aborted by upper layer!\n",
- t, event, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
tag = le32_to_cpu(psataPayload->tag);
if (!tag) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("tag null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "tag null\n");
return;
}
ccb = &pm8001_ha->ccb_info[tag];
t = ccb->task;
pm8001_dev = ccb->device;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("ccb null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "ccb null\n");
return;
}
if (t->dev && (t->dev->lldd_dev))
pm8001_dev = t->dev->lldd_dev;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "task null\n");
return;
}
if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
&& unlikely(!t || !t->lldd_task || !t->dev)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task or dev null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
return;
}
ts = &t->task_status;
if (!ts) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("ts null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "ts null\n");
return;
}
if (status)
- PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
- "status:0x%x, tag:0x%x, task::0x%p\n",
- status, tag, t));
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task::0x%p\n",
+ status, tag, t);
/* Print sas address of IO failed device */
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
& 0xff000000)) +
pm8001_dev->attached_phy +
0x10);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive:"
- "%08x%08x", temp_sata_addr_hi,
- temp_sata_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%08x%08x\n",
+ temp_sata_addr_hi,
+ temp_sata_addr_low);
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive:"
- "%016llx", SAS_ADDR(t->dev->sas_addr)));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
}
}
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PROTO_RESPONSE;
ts->residual = param;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
- param));
+ pm8001_dbg(pm8001_ha, IO,
+ "SAS_PROTO_RESPONSE len = %d\n",
+ param);
sata_resp = &psataPayload->sata_resp[0];
resp = (struct ata_task_resp *)ts->buf;
if (t->ata_task.dma_xfer == 0 &&
t->data_dir == DMA_FROM_DEVICE) {
len = sizeof(struct pio_setup_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("PIO read len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO,
+ "PIO read len = %d\n", len);
} else if (t->ata_task.use_ncq) {
len = sizeof(struct set_dev_bits_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("FPDMA len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
+ len);
} else {
len = sizeof(struct dev_to_host_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("other len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
+ len);
}
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = len;
memcpy(&resp->ending_fis[0], sata_resp, len);
ts->buf_valid_size = sizeof(*resp);
} else
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("response to large\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "response too large\n");
}
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
/* following cases are to do cases */
case IO_UNDERFLOW:
/* SATA Completion with error */
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
- "_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
}
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
- "NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
- "_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(" IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, " IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_IN_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p done with io_status 0x%x"
- " resp 0x%x stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
t = ccb->task;
pm8001_dev = ccb->device;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("No CCB !!!. returning\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "No CCB !!!. returning\n");
}
if (event)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SATA EVENT 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
/* Check if this is NCQ error */
if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
t = ccb->task;
pm8001_dev = ccb->device;
if (event)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sata IO status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
- port_id, dev_id, tag, event));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, dev_id, tag, event);
switch (event) {
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
- "_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
- "NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_ERROR_PEER_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_UNEXPECTED_PHASE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_RDY_OVERRUN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_CMD_FRAME_ISSUED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
break;
case IO_XFER_PIO_SETUP_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p done with io_status 0x%x"
- " resp 0x%x stat 0x%x but aborted by upper layer!\n",
- t, event, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
ts = &t->task_status;
pm8001_dev = ccb->device;
if (status) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("smp IO status 0x%x\n", status));
- PM8001_IOERR_DBG(pm8001_ha,
- pm8001_printk("status:0x%x, tag:0x%x, task:0x%p\n",
- status, tag, t));
+ pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task:0x%p\n",
+ status, tag, t);
}
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PHY_DOWN;
break;
case IO_ERROR_HW_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
- "NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_RX_FRAME:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_ERROR_INTERNAL_SMP_RESOURCE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_QUEUE_FULL;
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
/* not allowed case. Therefore, return failed status */
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
- " io_status 0x%x resp 0x%x "
- "stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
u32 device_id = le32_to_cpu(pPayload->device_id);
u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS;
u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS;
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
- "from 0x%x to 0x%x status = 0x%x!\n",
- device_id, pds, nds, status));
+ pm8001_dbg(pm8001_ha, MSG, "Set device id = 0x%x state from 0x%x to 0x%x status = 0x%x!\n",
+ device_id, pds, nds, status);
complete(pm8001_dev->setds_completion);
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
complete(pm8001_ha->nvmd_completion);
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
if ((dlen_status & NVMD_STAT) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Set nvm data error!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Set nvm data error!\n");
return;
}
ccb->task = NULL;
void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
fw_control_context = ccb->fw_control_context;
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Get nvm data complete!\n");
if ((dlen_status & NVMD_STAT) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Get nvm data error!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Get nvm data error!\n");
complete(pm8001_ha->nvmd_completion);
return;
}
if (ir_tds_bn_dps_das_nvm & IPMode) {
/* indirect mode - IR bit set */
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Get NVMD success, IR=1\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Get NVMD success, IR=1\n");
if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
memcpy(pm8001_ha->sas_addr,
((u8 *)virt_addr + 4),
SAS_ADDR_SIZE);
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Get SAS address"
- " from VPD successfully!\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Get SAS address from VPD successfully!\n");
}
} else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
|| ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
;
} else {
/* Should not be happened*/
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
- ir_tds_bn_dps_das_nvm));
+ pm8001_dbg(pm8001_ha, MSG,
+ "(IR=1)Wrong Device type 0x%x\n",
+ ir_tds_bn_dps_das_nvm);
}
} else /* direct mode */{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
- (dlen_status & NVMD_LEN) >> 24));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Get NVMD success, IR=0, dataLen=%d\n",
+ (dlen_status & NVMD_LEN) >> 24);
}
/* Though fw_control_context is freed below, usrAddr still needs
* to be updated as this holds the response to the request function
* fw_control_context->usrAddr
*/
complete(pm8001_ha->nvmd_completion);
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
pm8001_tag_free(pm8001_ha, tag);
u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
tag = le32_to_cpu(pPayload->tag);
if (status != 0) {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op failed!\n",
- phy_id, phy_op));
+ pm8001_dbg(pm8001_ha, MSG,
+ "%x phy execute %x phy op failed!\n",
+ phy_id, phy_op);
} else {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op success!\n",
- phy_id, phy_op));
+ pm8001_dbg(pm8001_ha, MSG,
+ "%x phy execute %x phy op success!\n",
+ phy_id, phy_op);
pm8001_ha->phy[phy_id].reset_success = true;
}
if (pm8001_ha->phy[phy_id].enable_completion) {
} else if (phy->phy_type & PORT_TYPE_SATA) {
/*Nothing*/
}
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
+ pm8001_dbg(pm8001_ha, MSG, "phy %d byte dmaded.\n", i);
sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
phy->phy_state = PHY_STATE_LINK_UP_SPC;
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
- port_id, phy_id));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id);
switch (deviceType) {
case SAS_PHY_UNUSED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("device type no device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
break;
case SAS_END_DEVICE:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "end device.\n");
pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
PHY_NOTIFY_ENABLE_SPINUP);
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_EDGE_EXPANDER_DEVICE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("expander device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_FANOUT_EXPANDER_DEVICE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("fanout expander device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("unknown device type(%x)\n", deviceType));
+ pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
+ deviceType);
break;
}
phy->phy_type |= PORT_TYPE_SAS;
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
unsigned long flags;
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
- " phy id = %d\n", port_id, phy_id));
+ pm8001_dbg(pm8001_ha, DEVIO, "HW_EVENT_SATA_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id);
port->port_state = portstate;
phy->phy_state = PHY_STATE_LINK_UP_SPC;
port->port_attached = 1;
case PORT_VALID:
break;
case PORT_INVALID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" PortInvalid portID %d\n", port_id));
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n",
+ port_id);
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
port->port_attached = 0;
pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
port_id, phy_id, 0, 0);
break;
case PORT_IN_RESET:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Port In Reset portID %d\n", port_id));
+ pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n",
+ port_id);
break;
case PORT_NOT_ESTABLISHED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ " phy Down and PORT_NOT_ESTABLISHED\n");
port->port_attached = 0;
break;
case PORT_LOSTCOMM:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_dbg(pm8001_ha, MSG, " phy Down and PORT_LOSTCOMM\n");
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
port->port_attached = 0;
pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
port_id, phy_id, 0, 0);
break;
default:
port->port_attached = 0;
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk(" phy Down and(default) = %x\n",
- portstate));
+ pm8001_dbg(pm8001_ha, DEVIO, " phy Down and(default) = %x\n",
+ portstate);
break;
}
pm8001_dev = ccb->device;
status = le32_to_cpu(registerRespPayload->status);
device_id = le32_to_cpu(registerRespPayload->device_id);
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" register device is status = %d\n", status));
+ pm8001_dbg(pm8001_ha, MSG, " register device is status = %d\n",
+ status);
switch (status) {
case DEVREG_SUCCESS:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_SUCCESS\n");
pm8001_dev->device_id = device_id;
break;
case DEVREG_FAILURE_OUT_OF_RESOURCE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_OUT_OF_RESOURCE\n");
break;
case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n");
break;
case DEVREG_FAILURE_INVALID_PHY_ID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_INVALID_PHY_ID\n");
break;
case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n");
break;
case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n");
break;
case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PORT_NOT_VALID_STATE\n");
break;
case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n");
break;
default:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n");
break;
}
complete(pm8001_dev->dcompletion);
status = le32_to_cpu(registerRespPayload->status);
device_id = le32_to_cpu(registerRespPayload->device_id);
if (status != 0)
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" deregister device failed ,status = %x"
- ", device_id = %x\n", status, device_id));
+ pm8001_dbg(pm8001_ha, MSG,
+ " deregister device failed ,status = %x, device_id = %x\n",
+ status, device_id);
return 0;
}
status = le32_to_cpu(ppayload->status);
switch (status) {
case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ ": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n");
break;
case FLASH_UPDATE_IN_PROGRESS:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_IN_PROGRESS\n");
break;
case FLASH_UPDATE_HDR_ERR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HDR_ERR\n");
break;
case FLASH_UPDATE_OFFSET_ERR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_OFFSET_ERR\n");
break;
case FLASH_UPDATE_CRC_ERR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_CRC_ERR\n");
break;
case FLASH_UPDATE_LENGTH_ERR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_LENGTH_ERR\n");
break;
case FLASH_UPDATE_HW_ERR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HW_ERR\n");
break;
case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ ": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n");
break;
case FLASH_UPDATE_DISABLED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_DISABLED\n");
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("No matched status = %d\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "No matched status = %d\n",
+ status);
break;
}
kfree(ccb->fw_control_context);
struct general_event_resp *pPayload =
(struct general_event_resp *)(piomb + 4);
status = le32_to_cpu(pPayload->status);
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" status = 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, MSG, " status = 0x%x\n", status);
for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i,
- pPayload->inb_IOMB_payload[i]));
+ pm8001_dbg(pm8001_ha, MSG, "inb_IOMB_payload[0x%x] 0x%x,\n",
+ i,
+ pPayload->inb_IOMB_payload[i]);
return 0;
}
status = le32_to_cpu(pPayload->status);
tag = le32_to_cpu(pPayload->tag);
if (!tag) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk(" TAG NULL. RETURNING !!!"));
+ pm8001_dbg(pm8001_ha, FAIL, " TAG NULL. RETURNING !!!\n");
return -1;
}
pm8001_dev = ccb->device; /* retrieve device */
if (!t) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk(" TASK NULL. RETURNING !!!"));
+ pm8001_dbg(pm8001_ha, FAIL, " TASK NULL. RETURNING !!!\n");
return -1;
}
ts = &t->task_status;
if (status != 0)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task abort failed status 0x%x ,"
- "tag = 0x%x, scp= 0x%x\n", status, tag, scp));
+ pm8001_dbg(pm8001_ha, FAIL, "task abort failed status 0x%x ,tag = 0x%x, scp= 0x%x\n",
+ status, tag, scp);
switch (status) {
case IO_SUCCESS:
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
break;
case IO_NOT_VALID:
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
+ pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n");
ts->resp = TMF_RESP_FUNC_FAILED;
break;
}
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n",
- port_id, phy_id, eventType, status));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n",
+ port_id, phy_id, eventType, status);
switch (eventType) {
case HW_EVENT_PHY_START_STATUS:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_START_STATUS"
- " status = %x\n", status));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n",
+ status);
if (status == 0) {
phy->phy_state = 1;
if (pm8001_ha->flags == PM8001F_RUN_TIME &&
}
break;
case HW_EVENT_SAS_PHY_UP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n");
hw_event_sas_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_SATA_PHY_UP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n");
hw_event_sata_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_PHY_STOP_STATUS:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
- "status = %x\n", status));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_STOP_STATUS status = %x\n",
+ status);
if (status == 0)
phy->phy_state = 0;
break;
case HW_EVENT_SATA_SPINUP_HOLD:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n");
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
break;
case HW_EVENT_PHY_DOWN:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n");
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
phy->phy_attached = 0;
phy->phy_state = 0;
hw_event_phy_down(pm8001_ha, piomb);
break;
case HW_EVENT_PORT_INVALID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
/* the broadcast change primitive received, tell the LIBSAS this event
to revalidate the sas domain*/
case HW_EVENT_BROADCAST_CHANGE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
port_id, phy_id, 1, 0);
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_PHY_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n");
sas_phy_disconnected(&phy->sas_phy);
phy->phy_attached = 0;
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
break;
case HW_EVENT_BROADCAST_EXP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_LINK_ERR_INVALID_DWORD:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_INVALID_DWORD\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
sas_phy_disconnected(sas_phy);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_DISPARITY_ERROR,
port_id, phy_id, 0, 0);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_CODE_VIOLATION:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_CODE_VIOLATION\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_CODE_VIOLATION,
port_id, phy_id, 0, 0);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
port_id, phy_id, 0, 0);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_MALFUNCTION:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n");
break;
case HW_EVENT_BROADCAST_SES:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_INBOUND_CRC_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_INBOUND_CRC_ERROR,
port_id, phy_id, 0, 0);
break;
case HW_EVENT_HARD_RESET_RECEIVED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n");
sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
break;
case HW_EVENT_ID_FRAME_TIMEOUT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n");
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
port_id, phy_id, 0, 0);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RESET_TIMER_TMO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVER:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n");
break;
case HW_EVENT_PORT_RESET_COMPLETE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n");
break;
case EVENT_BROADCAST_ASYNCH_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown event type = %x\n", eventType));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type = %x\n",
+ eventType);
break;
}
return 0;
__le32 pHeader = *(__le32 *)piomb;
u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
+ pm8001_dbg(pm8001_ha, MSG, "process_one_iomb:\n");
switch (opc) {
case OPC_OUB_ECHO:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
break;
case OPC_OUB_HW_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_HW_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
mpi_hw_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
mpi_ssp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SMP_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
mpi_smp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_LOCAL_PHY_CNTRL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
break;
case OPC_OUB_DEV_REGIST:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
pm8001_mpi_reg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEREG_DEV:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unregister the device\n"));
+ pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
pm8001_mpi_dereg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEV_HANDLE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
break;
case OPC_OUB_SATA_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
mpi_sata_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
mpi_sata_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
mpi_ssp_event(pm8001_ha, piomb);
break;
case OPC_OUB_DEV_HANDLE_ARRIV:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
/*This is for target*/
break;
case OPC_OUB_SSP_RECV_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
/*This is for target*/
break;
case OPC_OUB_DEV_INFO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_INFO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_INFO\n");
break;
case OPC_OUB_FW_FLASH_UPDATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GPIO_RESPONSE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
break;
case OPC_OUB_GPIO_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
break;
case OPC_OUB_GENERAL_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
pm8001_mpi_general_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SAS_DIAG_MODE_START_END:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SAS_DIAG_MODE_START_END\n");
break;
case OPC_OUB_SAS_DIAG_EXECUTE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
break;
case OPC_OUB_GET_TIME_STAMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
break;
case OPC_OUB_SAS_HW_EVENT_ACK:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
break;
case OPC_OUB_PORT_CONTROL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
break;
case OPC_OUB_SMP_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_NVMD_DATA:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SET_NVMD_DATA:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEVICE_HANDLE_REMOVAL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
break;
case OPC_OUB_SET_DEVICE_STATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEVICE_STATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
break;
case OPC_OUB_SET_DEV_INFO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
break;
case OPC_OUB_SAS_RE_INITIALIZE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_RE_INITIALIZE\n");
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
- opc));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown outbound Queue IOMB OPC = %x\n",
+ opc);
break;
}
}
circularQ = &pm8001_ha->inbnd_q_tbl[0];
if (task->data_dir == DMA_NONE) {
ATAP = 0x04; /* no data*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+ pm8001_dbg(pm8001_ha, IO, "no data\n");
} else if (likely(!task->ata_task.device_control_reg_update)) {
if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "DMA\n");
} else {
ATAP = 0x05; /* PIO*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+ pm8001_dbg(pm8001_ha, IO, "PIO\n");
}
if (task->ata_task.use_ncq &&
dev->sata_dev.class != ATA_DEV_ATAPI) {
ATAP = 0x07; /* FPDMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
}
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&task->task_state_lock,
flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p resp 0x%x "
- " stat 0x%x but aborted by upper layer "
- "\n", task, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p resp 0x%x stat 0x%x but aborted by upper layer\n",
+ task, ts->resp,
+ ts->stat);
pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
} else {
spin_unlock_irqrestore(&task->task_state_lock,
memset(&payload, 0, sizeof(payload));
payload.tag = cpu_to_le32(1);
payload.device_id = cpu_to_le32(device_id);
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unregister device device_id = %d\n", device_id));
+ pm8001_dbg(pm8001_ha, MSG, "unregister device device_id = %d\n",
+ device_id);
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
sizeof(payload), 0);
return ret;
pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
pm8001_chip_interrupt_disable(pm8001_ha, vec);
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "irq vec %d, ODMR:0x%x\n",
- vec, pm8001_cr32(pm8001_ha, 0, 0x30)));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "irq vec %d, ODMR:0x%x\n",
+ vec, pm8001_cr32(pm8001_ha, 0, 0x30));
process_oq(pm8001_ha, vec);
pm8001_chip_interrupt_enable(pm8001_ha, vec);
return IRQ_HANDLED;
{
u32 opc, device_id;
int rc = TMF_RESP_FUNC_FAILED;
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
- cmd_tag, task_tag));
+ pm8001_dbg(pm8001_ha, EH, "cmd_tag = %x, abort task tag = 0x%x\n",
+ cmd_tag, task_tag);
if (pm8001_dev->dev_type == SAS_END_DEVICE)
opc = OPC_INB_SSP_ABORT;
else if (pm8001_dev->dev_type == SAS_SATA_DEV)
rc = send_task_abort(pm8001_ha, opc, device_id, flag,
task_tag, cmd_tag);
if (rc != TMF_RESP_FUNC_COMPLETE)
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
+ pm8001_dbg(pm8001_ha, EH, "rc= %d\n", rc);
return rc;
}
if (!fw_control_context)
return -ENOMEM;
fw_control = (struct fw_control_info *)&ioctl_payload->func_specific;
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "dma fw_control context input length :%x\n", fw_control->len));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "dma fw_control context input length :%x\n",
+ fw_control->len);
memcpy(buffer, fw_control->buffer, fw_control->len);
flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
spin_lock_init(&pm8001_ha->lock);
spin_lock_init(&pm8001_ha->bitmap_lock);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("pm8001_alloc: PHY:%x\n",
- pm8001_ha->chip->n_phy));
+ pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
+ pm8001_ha->chip->n_phy);
/* Setup Interrupt */
rc = pm8001_setup_irq(pm8001_ha);
if (rc) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "pm8001_setup_irq failed [ret: %d]\n", rc));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "pm8001_setup_irq failed [ret: %d]\n", rc);
goto err_out_shost;
}
/* Request Interrupt */
&pm8001_ha->memoryMap.region[i].phys_addr_lo,
pm8001_ha->memoryMap.region[i].total_len,
pm8001_ha->memoryMap.region[i].alignment) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Mem%d alloc failed\n",
- i));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Mem%d alloc failed\n",
+ i);
goto err_out;
}
}
pm8001_ha->io_mem[logicalBar].memvirtaddr =
ioremap(pm8001_ha->io_mem[logicalBar].membase,
pm8001_ha->io_mem[logicalBar].memsize);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCI: bar %d, logicalBar %d ",
- bar, logicalBar));
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "base addr %llx virt_addr=%llx len=%d\n",
- (u64)pm8001_ha->io_mem[logicalBar].membase,
- (u64)(unsigned long)
- pm8001_ha->io_mem[logicalBar].memvirtaddr,
- pm8001_ha->io_mem[logicalBar].memsize));
+ pm8001_dbg(pm8001_ha, INIT,
+ "PCI: bar %d, logicalBar %d\n",
+ bar, logicalBar);
+ pm8001_dbg(pm8001_ha, INIT,
+ "base addr %llx virt_addr=%llx len=%d\n",
+ (u64)pm8001_ha->io_mem[logicalBar].membase,
+ (u64)(unsigned long)
+ pm8001_ha->io_mem[logicalBar].memvirtaddr,
+ pm8001_ha->io_mem[logicalBar].memsize);
} else {
pm8001_ha->io_mem[logicalBar].membase = 0;
pm8001_ha->io_mem[logicalBar].memsize = 0;
else {
pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
LINKRATE_60 | LINKRATE_120;
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "Setting link rate to default value\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Setting link rate to default value\n");
}
sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
/* IOMB size is 128 for 8088/89 controllers */
payload.offset = 0;
payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
if (!payload.func_specific) {
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
+ pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n");
return;
}
rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
if (rc) {
kfree(payload.func_specific);
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
+ pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
return;
}
wait_for_completion(&completion);
sas_add[7] = sas_add[7] + 4;
memcpy(&pm8001_ha->phy[i].dev_sas_addr,
sas_add, SAS_ADDR_SIZE);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("phy %d sas_addr = %016llx\n", i,
- pm8001_ha->phy[i].dev_sas_addr));
+ pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
+ pm8001_ha->phy[i].dev_sas_addr);
}
kfree(payload.func_specific);
#else
rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
if (rc) {
kfree(payload.func_specific);
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
+ pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
return -ENOMEM;
}
wait_for_completion(&completion);
break;
default:
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Unknown subsystem device=0x%.04x",
- pm8001_ha->pdev->subsystem_device));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Unknown subsystem device=0x%.04x\n",
+ pm8001_ha->pdev->subsystem_device);
}
}
/* Maximum queue number updating in HBA structure */
pm8001_ha->max_q_num = number_of_intr;
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
- rc, pm8001_ha->number_of_intr));
+ pm8001_dbg(pm8001_ha, INIT,
+ "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
+ rc, pm8001_ha->number_of_intr);
return 0;
}
if (pm8001_ha->chip_id != chip_8001)
flag &= ~IRQF_SHARED;
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("pci_enable_msix request number of intr %d\n",
- pm8001_ha->number_of_intr));
+ pm8001_dbg(pm8001_ha, INIT,
+ "pci_enable_msix request number of intr %d\n",
+ pm8001_ha->number_of_intr);
for (i = 0; i < pm8001_ha->number_of_intr; i++) {
snprintf(pm8001_ha->intr_drvname[i],
#ifdef PM8001_USE_MSIX
if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
return pm8001_setup_msix(pm8001_ha);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MSIX not supported!!!\n"));
+ pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
#endif
return 0;
}
if (pdev->msix_cap && pci_msi_enabled())
return pm8001_request_msix(pm8001_ha);
else {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MSIX not supported!!!\n"));
+ pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
goto intx;
}
#endif
PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
if (rc) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "chip_init failed [ret: %d]\n", rc));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "chip_init failed [ret: %d]\n", rc);
goto err_out_ha_free;
}
pm8001_post_sas_ha_init(shost, chip);
rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
if (rc) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "sas_register_ha failed [ret: %d]\n", rc));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "sas_register_ha failed [ret: %d]\n", rc);
goto err_out_shost;
}
list_add_tail(&pm8001_ha->list, &hba_list);
pm8001_ha->ccb_info =
kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
if (!pm8001_ha->ccb_info) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
- ("Unable to allocate memory for ccb\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Unable to allocate memory for ccb\n");
goto err_out_noccb;
}
for (i = 0; i < ccb_count; i++) {
sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
&pm8001_ha->ccb_info[i].ccb_dma_handle);
if (!pm8001_ha->ccb_info[i].buf_prd) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
- ("pm80xx: ccb prd memory allocation error\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "pm80xx: ccb prd memory allocation error\n");
goto err_out;
}
pm8001_ha->ccb_info[i].task = NULL;
/* chip soft rst only for spc */
if (pm8001_ha->chip_id == chip_8001) {
PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("chip soft reset successful\n"));
+ pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
}
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
if (rc)
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return 0;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("func 0x%x\n", func));
+ pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func);
rc = -EOPNOTSUPP;
}
msleep(300);
t->task_done(t);
return 0;
}
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
+ pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n");
spin_lock_irqsave(&pm8001_ha->lock, flags);
do {
dev = t->dev;
}
if (rc) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("rc is %x\n", rc));
+ pm8001_dbg(pm8001_ha, IO, "rc is %x\n", rc);
atomic_dec(&pm8001_dev->running_req);
goto err_out_tag;
}
}
}
if (dev == PM8001_MAX_DEVICES) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("max support %d devices, ignore ..\n",
- PM8001_MAX_DEVICES));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "max support %d devices, ignore ..\n",
+ PM8001_MAX_DEVICES);
}
return NULL;
}
return &pm8001_ha->devices[dev];
}
if (dev == PM8001_MAX_DEVICES) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
- "DEVICE FOUND !!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n");
}
return NULL;
}
}
}
if (phy_id == parent_dev->ex_dev.num_phys) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Error: no attached dev:%016llx"
- " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
- SAS_ADDR(parent_dev->sas_addr)));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Error: no attached dev:%016llx at ex:%016llx.\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
res = -1;
}
} else {
flag = 1; /* directly sata */
}
} /*register this device to HBA*/
- PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
+ pm8001_dbg(pm8001_ha, DISC, "Found device\n");
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
wait_for_completion(&completion);
if (res) {
del_timer(&task->slow_task->timer);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Executing internal task "
- "failed\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n");
goto ex_err;
}
wait_for_completion(&task->slow_task->completion);
/* Even TMF timed out, return direct. */
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TMF task[%x]timeout.\n",
- tmf->tmf));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TMF task[%x]timeout.\n",
+ tmf->tmf);
goto ex_err;
}
}
if (task->task_status.resp == SAS_TASK_COMPLETE &&
task->task_status.stat == SAS_DATA_OVERRUN) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Blocked task error.\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Blocked task error.\n");
res = -EMSGSIZE;
break;
} else {
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk(" Task to dev %016llx response:"
- "0x%x status 0x%x\n",
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat));
+ pm8001_dbg(pm8001_ha, EH,
+ " Task to dev %016llx response:0x%x status 0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
sas_free_task(task);
task = NULL;
}
if (res) {
del_timer(&task->slow_task->timer);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Executing internal task "
- "failed\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n");
goto ex_err;
}
wait_for_completion(&task->slow_task->completion);
/* Even TMF timed out, return direct. */
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TMF task timeout.\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TMF task timeout.\n");
goto ex_err;
}
}
break;
} else {
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk(" Task to dev %016llx response: "
- "0x%x status 0x%x\n",
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat));
+ pm8001_dbg(pm8001_ha, EH,
+ " Task to dev %016llx response: 0x%x status 0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
sas_free_task(task);
task = NULL;
}
if (pm8001_dev) {
u32 device_id = pm8001_dev->device_id;
- PM8001_DISC_DBG(pm8001_ha,
- pm8001_printk("found dev[%d:%x] is gone.\n",
- pm8001_dev->device_id, pm8001_dev->dev_type));
+ pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n",
+ pm8001_dev->device_id, pm8001_dev->dev_type);
if (atomic_read(&pm8001_dev->running_req)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
pm8001_free_dev(pm8001_dev);
} else {
- PM8001_DISC_DBG(pm8001_ha,
- pm8001_printk("Found dev has gone.\n"));
+ pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
}
dev->lldd_dev = NULL;
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
}
rc = sas_phy_reset(phy, 1);
if (rc) {
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("phy reset failed for device %x\n"
- "with rc %d\n", pm8001_dev->device_id, rc));
+ pm8001_dbg(pm8001_ha, EH,
+ "phy reset failed for device %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc);
rc = TMF_RESP_FUNC_FAILED;
goto out;
}
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
if (rc) {
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("task abort failed %x\n"
- "with rc %d\n", pm8001_dev->device_id, rc));
+ pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc);
rc = TMF_RESP_FUNC_FAILED;
}
} else {
rc = sas_phy_reset(phy, 1);
msleep(2000);
}
- PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
- pm8001_dev->device_id, rc));
+ pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
out:
sas_put_local_phy(phy);
return rc;
pm8001_dev = dev->lldd_dev;
pm8001_ha = pm8001_find_ha_by_dev(dev);
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("I_T_Nexus handler invoked !!"));
+ pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n");
phy = sas_get_local_phy(dev);
rc = sas_phy_reset(phy, 1);
msleep(2000);
}
- PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
- pm8001_dev->device_id, rc));
+ pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
out:
sas_put_local_phy(phy);
rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
}
/* If failed, fall-through I_T_Nexus reset */
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
- pm8001_dev->device_id, rc));
+ pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
return rc;
}
int pm8001_query_task(struct sas_task *task)
{
u32 tag = 0xdeadbeef;
- int i = 0;
struct scsi_lun lun;
struct pm8001_tmf_task tmf_task;
int rc = TMF_RESP_FUNC_FAILED;
rc = TMF_RESP_FUNC_FAILED;
return rc;
}
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
- for (i = 0; i < 16; i++)
- printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
- printk(KERN_INFO "]\n");
+ pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd);
tmf_task.tmf = TMF_QUERY_TASK;
tmf_task.tag_of_task_to_be_managed = tag;
switch (rc) {
/* The task is still in Lun, release it then */
case TMF_RESP_FUNC_SUCC:
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("The task is still in Lun\n"));
+ pm8001_dbg(pm8001_ha, EH,
+ "The task is still in Lun\n");
break;
/* The task is not in Lun or failed, reset the phy */
case TMF_RESP_FUNC_FAILED:
case TMF_RESP_FUNC_COMPLETE:
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("The task is not in Lun or failed,"
- " reset the phy\n"));
+ pm8001_dbg(pm8001_ha, EH,
+ "The task is not in Lun or failed, reset the phy\n");
break;
}
}
* leaking the task in libsas or losing the race and
* getting a double free.
*/
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Waiting for local phy ctl\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Waiting for local phy ctl\n");
ret = wait_for_completion_timeout(&completion,
PM8001_TASK_TIMEOUT * HZ);
if (!ret || !phy->reset_success) {
/* 3. Wait for Port Reset complete or
* Port reset TMO
*/
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Waiting for Port reset\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Waiting for Port reset\n");
ret = wait_for_completion_timeout(
&completion_reset,
PM8001_TASK_TIMEOUT * HZ);
struct pm8001_device *pm8001_dev = dev->lldd_dev;
struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("I_T_L_Q clear task set[%x]\n",
- pm8001_dev->device_id));
+ pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n",
+ pm8001_dev->device_id);
tmf_task.tmf = TMF_CLEAR_TASK_SET;
return pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
}
#define PM8001_DEV_LOGGING 0x80 /* development message logging */
#define PM8001_DEVIO_LOGGING 0x100 /* development io message logging */
#define PM8001_IOERR_LOGGING 0x200 /* development io err message logging */
-#define pm8001_printk(format, arg...) pr_info("%s:: %s %d:" \
- format, pm8001_ha->name, __func__, __LINE__, ## arg)
-#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
-do { \
- if (unlikely(HBA->logging_level & LEVEL)) \
- do { \
- CMD; \
- } while (0); \
-} while (0);
-#define PM8001_EH_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
+#define pm8001_printk(fmt, ...) \
+ pr_info("%s:: %s %d:" fmt, \
+ pm8001_ha->name, __func__, __LINE__, ##__VA_ARGS__)
-#define PM8001_INIT_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
-
-#define PM8001_DISC_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
-
-#define PM8001_IO_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
-
-#define PM8001_FAIL_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
-
-#define PM8001_IOCTL_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
-
-#define PM8001_MSG_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
-
-#define PM8001_DEV_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_DEV_LOGGING, CMD)
-
-#define PM8001_DEVIO_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_DEVIO_LOGGING, CMD)
-
-#define PM8001_IOERR_DBG(HBA, CMD) \
- PM8001_CHECK_LOGGING(HBA, PM8001_IOERR_LOGGING, CMD)
+#define pm8001_dbg(HBA, level, fmt, ...) \
+do { \
+ if (unlikely((HBA)->logging_level & PM8001_##level##_LOGGING)) \
+ pm8001_printk(fmt, ##__VA_ARGS__); \
+} while (0)
#define PM8001_USE_TASKLET
#define PM8001_USE_MSIX
reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER);
} while ((reg_val != shift_value) && time_before(jiffies, start));
if (reg_val != shift_value) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
- " = 0x%x\n", reg_val));
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MEMBASE_II_SHIFT_REGISTER = 0x%x\n",
+ reg_val);
return -1;
}
return 0;
}
/* initialize variables for very first call from host application */
if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("forensic_info TYPE_NON_FATAL..............\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "forensic_info TYPE_NON_FATAL..............\n");
direct_data = (u8 *)fatal_error_data;
pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
MPI_FATAL_EDUMP_TABLE_SIGNATURE, 0x1234abcd);
pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("ossaHwCB: status1 %d\n", status));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("ossaHwCB: read_len 0x%x\n",
- pm8001_ha->forensic_info.data_buf.read_len));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("ossaHwCB: direct_len 0x%x\n",
- pm8001_ha->forensic_info.data_buf.direct_len));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("ossaHwCB: direct_offset 0x%x\n",
- pm8001_ha->forensic_info.data_buf.direct_offset));
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: status1 %d\n", status);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: read_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.read_len);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_len);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_offset 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_offset);
}
if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
/* start to get data */
*/
length_to_read =
accum_len - pm8001_ha->forensic_preserved_accumulated_transfer;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: accum_len 0x%x\n", accum_len));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: length_to_read 0x%x\n",
- length_to_read));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: last_offset 0x%x\n",
- pm8001_ha->forensic_last_offset));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: read_len 0x%x\n",
- pm8001_ha->forensic_info.data_buf.read_len));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv:: direct_len 0x%x\n",
- pm8001_ha->forensic_info.data_buf.direct_len));
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv:: direct_offset 0x%x\n",
- pm8001_ha->forensic_info.data_buf.direct_offset));
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: accum_len 0x%x\n",
+ accum_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: length_to_read 0x%x\n",
+ length_to_read);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: last_offset 0x%x\n",
+ pm8001_ha->forensic_last_offset);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: read_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.read_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_offset 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_offset);
/* If accumulated length failed to read correctly fail the attempt.*/
if (accum_len == 0xFFFFFFFF) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("Possible PCI issue 0x%x not expected\n",
- accum_len));
+ pm8001_dbg(pm8001_ha, IO,
+ "Possible PCI issue 0x%x not expected\n",
+ accum_len);
return status;
}
/* If accumulated length is zero fail the attempt */
offset = (int)
((char *)pm8001_ha->forensic_info.data_buf.direct_data
- (char *)buf);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv:return1 0x%x\n", offset));
+ pm8001_dbg(pm8001_ha, IO,
+ "get_fatal_spcv:return1 0x%x\n", offset);
return (char *)pm8001_ha->
forensic_info.data_buf.direct_data -
(char *)buf;
offset = (int)
((char *)pm8001_ha->forensic_info.data_buf.direct_data
- (char *)buf);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv:return2 0x%x\n", offset));
+ pm8001_dbg(pm8001_ha, IO,
+ "get_fatal_spcv:return2 0x%x\n", offset);
return (char *)pm8001_ha->
forensic_info.data_buf.direct_data -
(char *)buf;
offset = (int)
((char *)pm8001_ha->forensic_info.data_buf.direct_data
- (char *)buf);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: return3 0x%x\n", offset));
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return3 0x%x\n",
+ offset);
return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
(char *)buf;
}
} while ((reg_val) && time_before(jiffies, start));
if (reg_val != 0) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n",
- reg_val));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n",
+ reg_val);
/* Fail the dump if a timeout occurs */
pm8001_ha->forensic_info.data_buf.direct_data +=
sprintf(
time_before(jiffies, start));
if (reg_val < 2) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n",
- reg_val));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n",
+ reg_val);
/* Fail the dump if a timeout occurs */
pm8001_ha->forensic_info.data_buf.direct_data +=
sprintf(
}
offset = (int)((char *)pm8001_ha->forensic_info.data_buf.direct_data
- (char *)buf);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("get_fatal_spcv: return4 0x%x\n", offset));
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return4 0x%x\n", offset);
return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
(char *)buf;
}
PAGE_SIZE, "Not supported for SPC controller");
return 0;
}
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("forensic_info TYPE_NON_FATAL...\n"));
+ pm8001_dbg(pm8001_ha, IO, "forensic_info TYPE_NON_FATAL...\n");
/*
* Step 1: Write the host buffer parameters in the MPI Fatal and
* Non-Fatal Error Dump Capture Table.This is the buffer
pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version =
pm8001_mr32(address, MAIN_MPI_INACTIVE_FW_VERSION);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n",
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev));
-
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n",
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset));
-
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Main cfg table; ila rev:%x Inactive fw rev:%x\n",
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version,
- pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version));
+ pm8001_dbg(pm8001_ha, DEV,
+ "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "Main cfg table; ila rev:%x Inactive fw rev:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version);
}
/**
pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i,
- pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
- pm8001_ha->inbnd_q_tbl[i].pi_offset));
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i,
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
+ pm8001_ha->inbnd_q_tbl[i].pi_offset);
}
for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i,
- pm8001_ha->outbnd_q_tbl[i].ci_pci_bar,
- pm8001_ha->outbnd_q_tbl[i].ci_offset));
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i,
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar,
+ pm8001_ha->outbnd_q_tbl[i].ci_offset);
}
}
((pm8001_ha->max_q_num - 1) << 8);
pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Updated Fatal error interrupt vector 0x%x\n",
- pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT)));
+ pm8001_dbg(pm8001_ha, DEV,
+ "Updated Fatal error interrupt vector 0x%x\n",
+ pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT));
pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Programming DW 0x21 in main cfg table with 0x%x\n",
- pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET)));
+ pm8001_dbg(pm8001_ha, DEV,
+ "Programming DW 0x21 in main cfg table with 0x%x\n",
+ pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET));
pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "IQ %d: Element pri size 0x%x\n",
- number,
- pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt));
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ %d: Element pri size 0x%x\n",
+ number,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n",
- pm8001_ha->inbnd_q_tbl[number].upper_base_addr,
- pm8001_ha->inbnd_q_tbl[number].lower_base_addr));
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n",
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "CI upper base addr 0x%x CI lower base addr 0x%x\n",
- pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr,
- pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr));
+ pm8001_dbg(pm8001_ha, DEV,
+ "CI upper base addr 0x%x CI lower base addr 0x%x\n",
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
}
/**
pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "OQ %d: Element pri size 0x%x\n",
- number,
- pm8001_ha->outbnd_q_tbl[number].element_size_cnt));
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ %d: Element pri size 0x%x\n",
+ number,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n",
- pm8001_ha->outbnd_q_tbl[number].upper_base_addr,
- pm8001_ha->outbnd_q_tbl[number].lower_base_addr));
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n",
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "PI upper base addr 0x%x PI lower base addr 0x%x\n",
- pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr,
- pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr));
+ pm8001_dbg(pm8001_ha, DEV,
+ "PI upper base addr 0x%x PI lower base addr 0x%x\n",
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
}
/**
if (!max_wait_count) {
/* additional check */
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "Inb doorbell clear not toggled[value:%x]\n", value));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Inb doorbell clear not toggled[value:%x]\n",
+ value);
return -EBUSY;
}
/* check the MPI-State for initialization upto 100ms*/
if (!max_wait_count)
ret = -1;
else {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" ila ready status in %d millisec\n",
- (max_wait_time - max_wait_count)));
+ pm8001_dbg(pm8001_ha, MSG,
+ " ila ready status in %d millisec\n",
+ (max_wait_time - max_wait_count));
}
/* check RAAE status */
if (!max_wait_count)
ret = -1;
else {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" raae ready status in %d millisec\n",
- (max_wait_time - max_wait_count)));
+ pm8001_dbg(pm8001_ha, MSG,
+ " raae ready status in %d millisec\n",
+ (max_wait_time - max_wait_count));
}
/* check iop0 status */
if (!max_wait_count)
ret = -1;
else {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" iop0 ready status in %d millisec\n",
- (max_wait_time - max_wait_count)));
+ pm8001_dbg(pm8001_ha, MSG,
+ " iop0 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count));
}
/* check iop1 status only for 16 port controllers */
if (!max_wait_count)
ret = -1;
else {
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "iop1 ready status in %d millisec\n",
- (max_wait_time - max_wait_count)));
+ pm8001_dbg(pm8001_ha, MSG,
+ "iop1 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count));
}
}
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
- PM8001_DEV_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n",
- offset, value));
+ pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n",
+ offset, value);
pcilogic = (value & 0xFC000000) >> 26;
pcibar = get_pci_bar_index(pcilogic);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
pm8001_ha->general_stat_tbl_addr =
base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) &
0xFFFFFF);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GST OFFSET 0x%x\n",
- pm8001_cr32(pm8001_ha, pcibar, offset + 0x18)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("INBND OFFSET 0x%x\n",
- pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("OBND OFFSET 0x%x\n",
- pm8001_cr32(pm8001_ha, pcibar, offset + 0x20)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("IVT OFFSET 0x%x\n",
- pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PSPA OFFSET 0x%x\n",
- pm8001_cr32(pm8001_ha, pcibar, offset + 0x90)));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("addr - main cfg %p general status %p\n",
- pm8001_ha->main_cfg_tbl_addr,
- pm8001_ha->general_stat_tbl_addr));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("addr - inbnd %p obnd %p\n",
- pm8001_ha->inbnd_q_tbl_addr,
- pm8001_ha->outbnd_q_tbl_addr));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("addr - pspa %p ivt %p\n",
- pm8001_ha->pspa_q_tbl_addr,
- pm8001_ha->ivt_tbl_addr));
+ pm8001_dbg(pm8001_ha, INIT, "GST OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x18));
+ pm8001_dbg(pm8001_ha, INIT, "INBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C));
+ pm8001_dbg(pm8001_ha, INIT, "OBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x20));
+ pm8001_dbg(pm8001_ha, INIT, "IVT OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C));
+ pm8001_dbg(pm8001_ha, INIT, "PSPA OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x90));
+ pm8001_dbg(pm8001_ha, INIT, "addr - main cfg %p general status %p\n",
+ pm8001_ha->main_cfg_tbl_addr,
+ pm8001_ha->general_stat_tbl_addr);
+ pm8001_dbg(pm8001_ha, INIT, "addr - inbnd %p obnd %p\n",
+ pm8001_ha->inbnd_q_tbl_addr,
+ pm8001_ha->outbnd_q_tbl_addr);
+ pm8001_dbg(pm8001_ha, INIT, "addr - pspa %p ivt %p\n",
+ pm8001_ha->pspa_q_tbl_addr,
+ pm8001_ha->ivt_tbl_addr);
}
/**
(THERMAL_ENABLE << 8) | page_code;
payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
- payload.cfg_pg[0], payload.cfg_pg[1]));
+ pm8001_dbg(pm8001_ha, DEV,
+ "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
+ payload.cfg_pg[0], payload.cfg_pg[1]);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
sizeof(payload), 0);
| SAS_COPNRJT_RTRY_THR;
SASConfigPage.MAX_AIP = SAS_MAX_AIP;
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.pageCode "
- "0x%08x\n", SASConfigPage.pageCode));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.MST_MSI "
- " 0x%08x\n", SASConfigPage.MST_MSI));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
- " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.STP_FRM_TMO "
- " 0x%08x\n", SASConfigPage.STP_FRM_TMO));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.STP_IDLE_TMO "
- " 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
- " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
- " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
- " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
- " 0x%08x\n", SASConfigPage.MAX_AIP));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
+ SASConfigPage.pageCode);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI 0x%08x\n",
+ SASConfigPage.MST_MSI);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO 0x%08x\n",
+ SASConfigPage.STP_SSP_MCT_TMO);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO 0x%08x\n",
+ SASConfigPage.STP_FRM_TMO);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO 0x%08x\n",
+ SASConfigPage.STP_IDLE_TMO);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL 0x%08x\n",
+ SASConfigPage.OPNRJT_RTRY_INTVL);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO 0x%08x\n",
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR 0x%08x\n",
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR);
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP 0x%08x\n",
+ SASConfigPage.MAX_AIP);
memcpy(&payload.cfg_pg, &SASConfigPage,
sizeof(SASProtocolTimerConfig_t));
SCRATCH_PAD3_SMB_ENABLED)
pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
pm8001_ha->encrypt_info.status = 0;
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X."
- "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
- scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
- pm8001_ha->encrypt_info.sec_mode,
- pm8001_ha->encrypt_info.status));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X.Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
ret = 0;
} else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
SCRATCH_PAD3_ENC_DISABLED) {
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
- scratch3_value));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
+ scratch3_value);
pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
pm8001_ha->encrypt_info.cipher_mode = 0;
pm8001_ha->encrypt_info.sec_mode = 0;
if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
SCRATCH_PAD3_SMB_ENABLED)
pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X."
- "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
- scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
- pm8001_ha->encrypt_info.sec_mode,
- pm8001_ha->encrypt_info.status));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
} else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
SCRATCH_PAD3_ENC_ENA_ERR) {
SCRATCH_PAD3_SMB_ENABLED)
pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X."
- "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
- scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
- pm8001_ha->encrypt_info.sec_mode,
- pm8001_ha->encrypt_info.status));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
}
return ret;
}
payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
KEK_MGMT_SUBOP_KEYCARDUPDATE);
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "Saving Encryption info to flash. payload 0x%x\n",
- payload.new_curidx_ksop));
+ pm8001_dbg(pm8001_ha, DEV,
+ "Saving Encryption info to flash. payload 0x%x\n",
+ payload.new_curidx_ksop);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
sizeof(payload), 0);
/* check the firmware status */
if (-1 == check_fw_ready(pm8001_ha)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Firmware is not ready!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
return -EBUSY;
}
}
/* notify firmware update finished and check initialization status */
if (0 == mpi_init_check(pm8001_ha)) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("MPI initialize successful!\n"));
+ pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
} else
return -EBUSY;
/* Check for encryption */
if (pm8001_ha->chip->encrypt) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Checking for encryption\n"));
+ pm8001_dbg(pm8001_ha, INIT, "Checking for encryption\n");
ret = pm80xx_get_encrypt_info(pm8001_ha);
if (ret == -1) {
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Encryption error !!\n"));
+ pm8001_dbg(pm8001_ha, INIT, "Encryption error !!\n");
if (pm8001_ha->encrypt_info.status == 0x81) {
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
- "Encryption enabled with error."
- "Saving encryption key to flash\n"));
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption enabled with error.Saving encryption key to flash\n");
pm80xx_encrypt_update(pm8001_ha);
}
}
} while ((value != 0) && (--max_wait_count));
if (!max_wait_count) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("TIMEOUT:IBDB value/=%x\n", value));
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=%x\n", value);
return -1;
}
break;
} while (--max_wait_count);
if (!max_wait_count) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk(" TIME OUT MPI State = 0x%x\n",
- gst_len_mpistate & GST_MPI_STATE_MASK));
+ pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK);
return -1;
}
u32 r1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
u32 r2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
u32 r3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "MPI state is not ready scratch: %x:%x:%x:%x\n",
- r0, r1, r2, r3));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "MPI state is not ready scratch: %x:%x:%x:%x\n",
+ r0, r1, r2, r3);
/* if things aren't ready but the bootloader is ok then
* try the reset anyway.
*/
}
/* checked for reset register normal state; 0x0 */
regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("reset register before write : 0x%x\n", regval));
+ pm8001_dbg(pm8001_ha, INIT, "reset register before write : 0x%x\n",
+ regval);
pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
msleep(500);
regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("reset register after write 0x%x\n", regval));
+ pm8001_dbg(pm8001_ha, INIT, "reset register after write 0x%x\n",
+ regval);
if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" soft reset successful [regval: 0x%x]\n",
- regval));
+ pm8001_dbg(pm8001_ha, MSG,
+ " soft reset successful [regval: 0x%x]\n",
+ regval);
} else {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" soft reset failed [regval: 0x%x]\n",
- regval));
+ pm8001_dbg(pm8001_ha, MSG,
+ " soft reset failed [regval: 0x%x]\n",
+ regval);
/* check bootloader is successfully executed or in HDA mode */
bootloader_state =
SCRATCH_PAD1_BOOTSTATE_MASK;
if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "Bootloader state - HDA mode SEEPROM\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode SEEPROM\n");
} else if (bootloader_state ==
SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "Bootloader state - HDA mode Bootstrap Pin\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode Bootstrap Pin\n");
} else if (bootloader_state ==
SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "Bootloader state - HDA mode soft reset\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode soft reset\n");
} else if (bootloader_state ==
SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "Bootloader state-HDA mode critical error\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state-HDA mode critical error\n");
}
return -EBUSY;
}
/* check the firmware status after reset */
if (-1 == check_fw_ready(pm8001_ha)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Firmware is not ready!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
/* check iButton feature support for motherboard controller */
if (pm8001_ha->pdev->subsystem_vendor !=
PCI_VENDOR_ID_ADAPTEC2 &&
ibutton1 = pm8001_cr32(pm8001_ha, 0,
MSGU_HOST_SCRATCH_PAD_7);
if (!ibutton0 && !ibutton1) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("iButton Feature is"
- " not Available!!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "iButton Feature is not Available!!!\n");
return -EBUSY;
}
if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("CRC Check for iButton"
- " Feature Failed!!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "CRC Check for iButton Feature Failed!!!\n");
return -EBUSY;
}
}
}
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SPCv soft reset Complete\n"));
+ pm8001_dbg(pm8001_ha, INIT, "SPCv soft reset Complete\n");
return 0;
}
{
u32 i;
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("chip reset start\n"));
+ pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
/* do SPCv chip reset. */
pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("SPC soft reset Complete\n"));
+ pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
/* Check this ..whether delay is required or no */
/* delay 10 usec */
mdelay(1);
} while ((--i) != 0);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("chip reset finished\n"));
+ pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
}
/**
int ret;
if (!pm8001_ha_dev) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "dev is null\n");
return;
}
task = sas_alloc_slow_task(GFP_ATOMIC);
if (!task) {
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
- "allocate task\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
return;
}
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort,
sizeof(task_abort), 0);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Executing abort task end\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Executing abort task end\n");
if (ret) {
sas_free_task(task);
pm8001_tag_free(pm8001_ha, ccb_tag);
task = sas_alloc_slow_task(GFP_ATOMIC);
if (!task) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("cannot allocate task !!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
return;
}
task->task_done = pm8001_task_done;
res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
if (res) {
sas_free_task(task);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("cannot allocate tag !!!\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "cannot allocate tag !!!\n");
return;
}
if (!dev) {
sas_free_task(task);
pm8001_tag_free(pm8001_ha, ccb_tag);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Domain device cannot be allocated\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Domain device cannot be allocated\n");
return;
}
res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
sizeof(sata_cmd), 0);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Executing read log end\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Executing read log end\n");
if (res) {
sas_free_task(task);
pm8001_tag_free(pm8001_ha, ccb_tag);
t = ccb->task;
if (status && status != IO_UNDERFLOW)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sas IO status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
- "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t));
+ pm8001_dbg(pm8001_ha, DEV,
+ "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t);
/* Print sas address of IO failed device */
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
(status != IO_UNDERFLOW))
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive"
- ":%016llx", SAS_ADDR(t->dev->sas_addr)));
+ pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_SUCCESS ,param = 0x%x\n",
- param));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS ,param = 0x%x\n",
+ param);
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
break;
case IO_UNDERFLOW:
/* SSP Completion with error */
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n",
- param));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW ,param = 0x%x\n",
+ param);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
/* Force the midlayer to retry */
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (!t->uldd_task)
IO_DS_NON_OPERATIONAL);
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_TM_TAG_NOT_FOUND:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
atomic_dec(&pm8001_dev->running_req);
break;
}
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("scsi_status = 0x%x\n ",
- psspPayload->ssp_resp_iu.status));
+ pm8001_dbg(pm8001_ha, IO, "scsi_status = 0x%x\n ",
+ psspPayload->ssp_resp_iu.status);
spin_lock_irqsave(&t->task_state_lock, flags);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "task 0x%p done with io_status 0x%x resp 0x%x "
- "stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
if (t->slow_task)
complete(&t->slow_task->completion);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
t = ccb->task;
pm8001_dev = ccb->device;
if (event)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sas IO status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_IOERR_DBG(pm8001_ha,
- pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
- port_id, tag, event));
+ pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event);
switch (event) {
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
return;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
return;
case IO_XFER_ERROR_UNEXPECTED_PHASE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_RDY_OVERRUN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
- PM8001_IOERR_DBG(pm8001_ha,
- pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IOERR,
+ "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
/* TBC: used default set values */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
case IO_XFER_CMD_FRAME_ISSUED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
return;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "task 0x%p done with event 0x%x resp 0x%x "
- "stat 0x%x but aborted by upper layer!\n",
- t, event, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
tag = le32_to_cpu(psataPayload->tag);
if (!tag) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("tag null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "tag null\n");
return;
}
ccb = &pm8001_ha->ccb_info[tag];
t = ccb->task;
pm8001_dev = ccb->device;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("ccb null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "ccb null\n");
return;
}
if (t->dev && (t->dev->lldd_dev))
pm8001_dev = t->dev->lldd_dev;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "task null\n");
return;
}
if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
&& unlikely(!t || !t->lldd_task || !t->dev)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task or dev null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
return;
}
ts = &t->task_status;
if (!ts) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("ts null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "ts null\n");
return;
}
if (unlikely(status))
- PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
- "status:0x%x, tag:0x%x, task::0x%p\n",
- status, tag, t));
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task::0x%p\n",
+ status, tag, t);
/* Print sas address of IO failed device */
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
& 0xff000000)) +
pm8001_dev->attached_phy +
0x10);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive:"
- "%08x%08x", temp_sata_addr_hi,
- temp_sata_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%08x%08x\n",
+ temp_sata_addr_hi,
+ temp_sata_addr_low);
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SAS Address of IO Failure Drive:"
- "%016llx", SAS_ADDR(t->dev->sas_addr)));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
}
}
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PROTO_RESPONSE;
ts->residual = param;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
- param));
+ pm8001_dbg(pm8001_ha, IO,
+ "SAS_PROTO_RESPONSE len = %d\n",
+ param);
sata_resp = &psataPayload->sata_resp[0];
resp = (struct ata_task_resp *)ts->buf;
if (t->ata_task.dma_xfer == 0 &&
t->data_dir == DMA_FROM_DEVICE) {
len = sizeof(struct pio_setup_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("PIO read len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO,
+ "PIO read len = %d\n", len);
} else if (t->ata_task.use_ncq) {
len = sizeof(struct set_dev_bits_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("FPDMA len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
+ len);
} else {
len = sizeof(struct dev_to_host_fis);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("other len = %d\n", len));
+ pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
+ len);
}
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = len;
memcpy(&resp->ending_fis[0], sata_resp, len);
ts->buf_valid_size = sizeof(*resp);
} else
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("response too large\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "response too large\n");
}
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
/* following cases are to do cases */
case IO_UNDERFLOW:
/* SATA Completion with error */
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
}
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_IN_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
atomic_dec(&pm8001_dev->running_req);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p done with io_status 0x%x"
- " resp 0x%x stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
if (t->slow_task)
complete(&t->slow_task->completion);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
t = ccb->task;
pm8001_dev = ccb->device;
} else {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("No CCB !!!. returning\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "No CCB !!!. returning\n");
return;
}
if (event)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("SATA EVENT 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
/* Check if this is NCQ error */
if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
}
if (unlikely(!t || !t->lldd_task || !t->dev)) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task or dev null\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
return;
}
ts = &t->task_status;
- PM8001_IOERR_DBG(pm8001_ha,
- pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
- port_id, tag, event));
+ pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event);
switch (event) {
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
if (!t->uldd_task) {
}
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_NAK_RECEIVED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_ERROR_PEER_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_UNEXPECTED_PHASE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_RDY_OVERRUN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_CMD_FRAME_ISSUED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
break;
case IO_XFER_PIO_SETUP_ERROR:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
/* TBC: used default set values */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
case IO_XFER_DMA_ACTIVATE_TIMEOUT:
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "IO_XFR_DMA_ACTIVATE_TIMEOUT\n");
/* TBC: used default set values */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
default:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", event));
+ pm8001_dbg(pm8001_ha, IO, "Unknown status 0x%x\n", event);
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p done with io_status 0x%x"
- " resp 0x%x stat 0x%x but aborted by upper layer!\n",
- t, event, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
ts = &t->task_status;
pm8001_dev = ccb->device;
if (status)
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("smp IO status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
- PM8001_DEV_DBG(pm8001_ha,
- pm8001_printk("tag::0x%x status::0x%x\n", tag, status));
+ pm8001_dbg(pm8001_ha, DEV, "tag::0x%x status::0x%x\n", tag, status);
switch (status) {
case IO_SUCCESS:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("DIRECT RESPONSE Length:%d\n",
- param));
+ pm8001_dbg(pm8001_ha, IO,
+ "DIRECT RESPONSE Length:%d\n",
+ param);
pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64
((u64)sg_dma_address
(&t->smp_task.smp_resp))));
for (i = 0; i < param; i++) {
*(pdma_respaddr+i) = psmpPayload->_r_a[i];
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
- i, *(pdma_respaddr+i),
- psmpPayload->_r_a[i]));
+ pm8001_dbg(pm8001_ha, IO,
+ "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
+ i, *(pdma_respaddr + i),
+ psmpPayload->_r_a[i]);
}
}
break;
case IO_ABORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
atomic_dec(&pm8001_dev->running_req);
break;
case IO_OVERFLOW:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PHY_DOWN;
break;
case IO_ERROR_HW_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_BUSY;
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
break;
case IO_OPEN_CNX_ERROR_BREAK:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
break;
case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(\
- "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
break;
case IO_XFER_ERROR_RX_FRAME:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_ERROR_INTERNAL_SMP_RESOURCE:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_QUEUE_FULL;
break;
case IO_PORT_IN_RESET:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_PORT_IN_RESET\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_DS_NON_OPERATIONAL:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
break;
case IO_DS_IN_RECOVERY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown status 0x%x\n", status));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
/* not allowed case. Therefore, return failed status */
t->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "task 0x%p done with io_status 0x%x resp 0x%x"
- "stat 0x%x but aborted by upper layer!\n",
- t, status, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%xstat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
port->port_state = portstate;
port->wide_port_phymap |= (1U << phy_id);
phy->phy_state = PHY_STATE_LINK_UP_SPCV;
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "portid:%d; phyid:%d; linkrate:%d; "
- "portstate:%x; devicetype:%x\n",
- port_id, phy_id, link_rate, portstate, deviceType));
+ pm8001_dbg(pm8001_ha, MSG,
+ "portid:%d; phyid:%d; linkrate:%d; portstate:%x; devicetype:%x\n",
+ port_id, phy_id, link_rate, portstate, deviceType);
switch (deviceType) {
case SAS_PHY_UNUSED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("device type no device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
break;
case SAS_END_DEVICE:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "end device.\n");
pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
PHY_NOTIFY_ENABLE_SPINUP);
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_EDGE_EXPANDER_DEVICE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("expander device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_FANOUT_EXPANDER_DEVICE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("fanout expander device.\n"));
+ pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("unknown device type(%x)\n", deviceType));
+ pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
+ deviceType);
break;
}
phy->phy_type |= PORT_TYPE_SAS;
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
unsigned long flags;
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "port id %d, phy id %d link_rate %d portstate 0x%x\n",
- port_id, phy_id, link_rate, portstate));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "port id %d, phy id %d link_rate %d portstate 0x%x\n",
+ port_id, phy_id, link_rate, portstate);
port->port_state = portstate;
phy->phy_state = PHY_STATE_LINK_UP_SPCV;
case PORT_VALID:
break;
case PORT_INVALID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" PortInvalid portID %d\n", port_id));
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n",
+ port_id);
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
if (port_sata) {
phy->phy_type = 0;
port->port_attached = 0;
sas_phy_disconnected(&phy->sas_phy);
break;
case PORT_IN_RESET:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Port In Reset portID %d\n", port_id));
+ pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n",
+ port_id);
break;
case PORT_NOT_ESTABLISHED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Phy Down and PORT_NOT_ESTABLISHED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ " Phy Down and PORT_NOT_ESTABLISHED\n");
port->port_attached = 0;
break;
case PORT_LOSTCOMM:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Phy Down and PORT_LOSTCOMM\n"));
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_dbg(pm8001_ha, MSG, " Phy Down and PORT_LOSTCOMM\n");
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
if (port_sata) {
port->port_attached = 0;
phy->phy_type = 0;
break;
default:
port->port_attached = 0;
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk(" Phy Down and(default) = 0x%x\n",
- portstate));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ " Phy Down and(default) = 0x%x\n",
+ portstate);
break;
}
le32_to_cpu(pPayload->phyid);
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
- status, phy_id));
+ pm8001_dbg(pm8001_ha, INIT,
+ "phy start resp status:0x%x, phyid:0x%x\n",
+ status, phy_id);
if (status == 0) {
phy->phy_state = PHY_LINK_DOWN;
if (pm8001_ha->flags == PM8001F_RUN_TIME &&
u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
if (thermal_event & 0x40) {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Thermal Event: Local high temperature violated!\n"));
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Thermal Event: Measured local high temperature %d\n",
- ((rht_lht & 0xFF00) >> 8)));
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Local high temperature violated!\n");
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Measured local high temperature %d\n",
+ ((rht_lht & 0xFF00) >> 8));
}
if (thermal_event & 0x10) {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Thermal Event: Remote high temperature violated!\n"));
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Thermal Event: Measured remote high temperature %d\n",
- ((rht_lht & 0xFF000000) >> 24)));
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Remote high temperature violated!\n");
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Measured remote high temperature %d\n",
+ ((rht_lht & 0xFF000000) >> 24));
}
return 0;
}
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
struct pm8001_port *port = &pm8001_ha->port[port_id];
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
- PM8001_DEV_DBG(pm8001_ha,
- pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
- port_id, phy_id, eventType, status));
+ pm8001_dbg(pm8001_ha, DEV,
+ "portid:%d phyid:%d event:0x%x status:0x%x\n",
+ port_id, phy_id, eventType, status);
switch (eventType) {
case HW_EVENT_SAS_PHY_UP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n");
hw_event_sas_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_SATA_PHY_UP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n");
hw_event_sata_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_SATA_SPINUP_HOLD:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n");
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
break;
case HW_EVENT_PHY_DOWN:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n");
hw_event_phy_down(pm8001_ha, piomb);
if (pm8001_ha->reset_in_progress) {
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("Reset in progress\n"));
+ pm8001_dbg(pm8001_ha, MSG, "Reset in progress\n");
return 0;
}
phy->phy_attached = 0;
phy->phy_state = PHY_LINK_DISABLE;
break;
case HW_EVENT_PORT_INVALID:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
/* the broadcast change primitive received, tell the LIBSAS this event
to revalidate the sas domain*/
case HW_EVENT_BROADCAST_CHANGE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
port_id, phy_id, 1, 0);
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_PHY_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n");
sas_phy_disconnected(&phy->sas_phy);
phy->phy_attached = 0;
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
break;
case HW_EVENT_BROADCAST_EXP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_LINK_ERR_INVALID_DWORD:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_INVALID_DWORD\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
break;
case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_DISPARITY_ERROR,
port_id, phy_id, 0, 0);
break;
case HW_EVENT_LINK_ERR_CODE_VIOLATION:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_CODE_VIOLATION\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_CODE_VIOLATION,
port_id, phy_id, 0, 0);
break;
case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
port_id, phy_id, 0, 0);
break;
case HW_EVENT_MALFUNCTION:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n");
break;
case HW_EVENT_BROADCAST_SES:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
break;
case HW_EVENT_INBOUND_CRC_ERROR:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_INBOUND_CRC_ERROR,
port_id, phy_id, 0, 0);
break;
case HW_EVENT_HARD_RESET_RECEIVED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n");
sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
break;
case HW_EVENT_ID_FRAME_TIMEOUT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n");
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
port_id, phy_id, 0, 0);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RESET_TIMER_TMO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
port_id, phy_id, 0, 0);
sas_phy_disconnected(sas_phy);
}
break;
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n");
pm80xx_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_PORT_RECOVERY_TIMER_TMO,
port_id, phy_id, 0, 0);
}
break;
case HW_EVENT_PORT_RECOVER:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n");
hw_event_port_recover(pm8001_ha, piomb);
break;
case HW_EVENT_PORT_RESET_COMPLETE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n");
if (pm8001_ha->phy[phy_id].reset_completion) {
pm8001_ha->phy[phy_id].port_reset_status =
PORT_RESET_SUCCESS;
}
break;
case EVENT_BROADCAST_ASYNCH_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha,
- pm8001_printk("Unknown event type 0x%x\n", eventType));
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type 0x%x\n",
+ eventType);
break;
}
return 0;
u32 phyid =
le32_to_cpu(pPayload->phyid) & 0xFF;
struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("phy:0x%x status:0x%x\n",
- phyid, status));
+ pm8001_dbg(pm8001_ha, MSG, "phy:0x%x status:0x%x\n",
+ phyid, status);
if (status == PHY_STOP_SUCCESS ||
status == PHY_STOP_ERR_DEVICE_ATTACHED)
phy->phy_state = PHY_LINK_DISABLE;
u32 status = le32_to_cpu(pPayload->status);
u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
- status, err_qlfr_pgcd));
+ pm8001_dbg(pm8001_ha, MSG,
+ "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
+ status, err_qlfr_pgcd);
return 0;
}
static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
return 0;
}
static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
return 0;
}
*/
static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
return 0;
}
page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
if (status) {
/* status is FAILED */
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("PhyProfile command failed with status "
- "0x%08X \n", status));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "PhyProfile command failed with status 0x%08X\n",
+ status);
rc = -1;
} else {
if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Invalid page code 0x%X\n",
- page_code));
+ pm8001_dbg(pm8001_ha, FAIL, "Invalid page code 0x%X\n",
+ page_code);
rc = -1;
}
}
u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
- status, kidx_new_curr_ksop, err_qlfr));
+ pm8001_dbg(pm8001_ha, MSG,
+ "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
+ status, kidx_new_curr_ksop, err_qlfr);
return 0;
}
static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
return 0;
}
static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
return 0;
}
switch (opc) {
case OPC_OUB_ECHO:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
break;
case OPC_OUB_HW_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_HW_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
mpi_hw_event(pm8001_ha, piomb);
break;
case OPC_OUB_THERM_HW_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_THERMAL_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_THERMAL_EVENT\n");
mpi_thermal_hw_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
mpi_ssp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SMP_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
mpi_smp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_LOCAL_PHY_CNTRL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
break;
case OPC_OUB_DEV_REGIST:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
pm8001_mpi_reg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEREG_DEV:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unregister the device\n"));
+ pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
pm8001_mpi_dereg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEV_HANDLE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
break;
case OPC_OUB_SATA_COMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_COMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
mpi_sata_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
mpi_sata_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
mpi_ssp_event(pm8001_ha, piomb);
break;
case OPC_OUB_DEV_HANDLE_ARRIV:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
/*This is for target*/
break;
case OPC_OUB_SSP_RECV_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
/*This is for target*/
break;
case OPC_OUB_FW_FLASH_UPDATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GPIO_RESPONSE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
break;
case OPC_OUB_GPIO_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
break;
case OPC_OUB_GENERAL_EVENT:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
pm8001_mpi_general_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SAS_DIAG_MODE_START_END:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SAS_DIAG_MODE_START_END\n");
break;
case OPC_OUB_SAS_DIAG_EXECUTE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
break;
case OPC_OUB_GET_TIME_STAMP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
break;
case OPC_OUB_SAS_HW_EVENT_ACK:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
break;
case OPC_OUB_PORT_CONTROL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
break;
case OPC_OUB_SMP_ABORT_RSP:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_NVMD_DATA:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SET_NVMD_DATA:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEVICE_HANDLE_REMOVAL:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
break;
case OPC_OUB_SET_DEVICE_STATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEVICE_STATE:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
break;
case OPC_OUB_SET_DEV_INFO:
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
break;
/* spcv specifc commands */
case OPC_OUB_PHY_START_RESP:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_PHY_START_RESP opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_PHY_START_RESP opcode:%x\n", opc);
mpi_phy_start_resp(pm8001_ha, piomb);
break;
case OPC_OUB_PHY_STOP_RESP:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc);
mpi_phy_stop_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SET_CONTROLLER_CONFIG:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc);
mpi_set_controller_config_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_CONTROLLER_CONFIG:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc);
mpi_get_controller_config_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_PHY_PROFILE:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc);
mpi_get_phy_profile_resp(pm8001_ha, piomb);
break;
case OPC_OUB_FLASH_OP_EXT:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc);
mpi_flash_op_ext_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SET_PHY_PROFILE:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc);
mpi_set_phy_profile_resp(pm8001_ha, piomb);
break;
case OPC_OUB_KEK_MANAGEMENT_RESP:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc);
mpi_kek_management_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEK_MANAGEMENT_RESP:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc);
mpi_dek_management_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_COALESCED_COMP_RESP:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
- "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc));
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc);
ssp_coalesced_comp_resp(pm8001_ha, piomb);
break;
default:
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "Unknown outbound Queue IOMB OPC = 0x%x\n", opc));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown outbound Queue IOMB OPC = 0x%x\n", opc);
break;
}
}
static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
{
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6)));
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
- pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7)));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_1:0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7));
}
static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
SCRATCH_PAD_MIPSALL_READY) {
pm8001_ha->controller_fatal_error = true;
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
- "Firmware Fatal error! Regval:0x%x\n", regval));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Firmware Fatal error! Regval:0x%x\n",
+ regval);
print_scratchpad_registers(pm8001_ha);
return ret;
}
smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
length = sg_req->length;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("SMP Frame Length %d\n", sg_req->length));
+ pm8001_dbg(pm8001_ha, IO, "SMP Frame Length %d\n", sg_req->length);
if (!(length - 8))
pm8001_ha->smp_exp_mode = SMP_DIRECT;
else
/* INDIRECT MODE command settings. Use DMA */
if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("SMP REQUEST INDIRECT MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "SMP REQUEST INDIRECT MODE\n");
/* for SPCv indirect mode. Place the top 4 bytes of
* SMP Request header here. */
for (i = 0; i < 4; i++)
((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
}
if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("SMP REQUEST DIRECT MODE\n"));
+ pm8001_dbg(pm8001_ha, IO, "SMP REQUEST DIRECT MODE\n");
for (i = 0; i < length; i++)
if (i < 16) {
smp_cmd.smp_req16[i] = *(preq_dma_addr+i);
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Byte[%d]:%x (DMA data:%x)\n",
- i, smp_cmd.smp_req16[i],
- *(preq_dma_addr)));
+ pm8001_dbg(pm8001_ha, IO,
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req16[i],
+ *(preq_dma_addr));
} else {
smp_cmd.smp_req[i] = *(preq_dma_addr+i);
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Byte[%d]:%x (DMA data:%x)\n",
- i, smp_cmd.smp_req[i],
- *(preq_dma_addr)));
+ pm8001_dbg(pm8001_ha, IO,
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req[i],
+ *(preq_dma_addr));
}
}
/* Check if encryption is set */
if (pm8001_ha->chip->encrypt &&
!(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
- task->ssp_task.cmd->cmnd[0]));
+ pm8001_dbg(pm8001_ha, IO,
+ "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
+ task->ssp_task.cmd->cmnd[0]);
opc = OPC_INB_SSP_INI_DIF_ENC_IO;
/* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
ssp_cmd.dad_dir_m_tlr = cpu_to_le32
end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
if (end_addr_high != ssp_cmd.enc_addr_high) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("The sg list address "
- "start_addr=0x%016llx data_len=0x%x "
- "end_addr_high=0x%08x end_addr_low="
- "0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.enc_len,
- end_addr_high, end_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ start_addr, ssp_cmd.enc_len,
+ end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
(task->ssp_task.cmd->cmnd[4] << 8) |
(task->ssp_task.cmd->cmnd[5]));
} else {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Sending Normal SAS command 0x%x inb q %x\n",
- task->ssp_task.cmd->cmnd[0], q_index));
+ pm8001_dbg(pm8001_ha, IO,
+ "Sending Normal SAS command 0x%x inb q %x\n",
+ task->ssp_task.cmd->cmnd[0], q_index);
/* fill in PRD (scatter/gather) table, if any */
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem,
end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
if (end_addr_high != ssp_cmd.addr_high) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("The sg list address "
- "start_addr=0x%016llx data_len=0x%x "
- "end_addr_high=0x%08x end_addr_low="
- "0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.len,
- end_addr_high, end_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ start_addr, ssp_cmd.len,
+ end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
if (task->data_dir == DMA_NONE) {
ATAP = 0x04; /* no data*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+ pm8001_dbg(pm8001_ha, IO, "no data\n");
} else if (likely(!task->ata_task.device_control_reg_update)) {
if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "DMA\n");
} else {
ATAP = 0x05; /* PIO*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+ pm8001_dbg(pm8001_ha, IO, "PIO\n");
}
if (task->ata_task.use_ncq &&
dev->sata_dev.class != ATA_DEV_ATAPI) {
ATAP = 0x07; /* FPDMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
}
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
/* Check if encryption is set */
if (pm8001_ha->chip->encrypt &&
!(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
- sata_cmd.sata_fis.command));
+ pm8001_dbg(pm8001_ha, IO,
+ "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
+ sata_cmd.sata_fis.command);
opc = OPC_INB_SATA_DIF_ENC_IO;
/* set encryption bit */
end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
if (end_addr_high != sata_cmd.enc_addr_high) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("The sg list address "
- "start_addr=0x%016llx data_len=0x%x "
- "end_addr_high=0x%08x end_addr_low"
- "=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.enc_len,
- end_addr_high, end_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ start_addr, sata_cmd.enc_len,
+ end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
(sata_cmd.sata_fis.lbam_exp));
} else {
- PM8001_IO_DBG(pm8001_ha, pm8001_printk(
- "Sending Normal SATA command 0x%x inb %x\n",
- sata_cmd.sata_fis.command, q_index));
+ pm8001_dbg(pm8001_ha, IO,
+ "Sending Normal SATA command 0x%x inb %x\n",
+ sata_cmd.sata_fis.command, q_index);
/* dad (bit 0-1) is 0 */
sata_cmd.ncqtag_atap_dir_m_dad =
cpu_to_le32(((ncg_tag & 0xff)<<16) |
end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
if (end_addr_high != sata_cmd.addr_high) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("The sg list address "
- "start_addr=0x%016llx data_len=0x%x"
- "end_addr_high=0x%08x end_addr_low="
- "0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.len,
- end_addr_high, end_addr_low));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ start_addr, sata_cmd.len,
+ end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&task->task_state_lock,
flags);
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("task 0x%p resp 0x%x "
- " stat 0x%x but aborted by upper layer "
- "\n", task, ts->resp, ts->stat));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p resp 0x%x stat 0x%x but aborted by upper layer\n",
+ task, ts->resp,
+ ts->stat);
pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
return 0;
} else {
memset(&payload, 0, sizeof(payload));
payload.tag = cpu_to_le32(tag);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
+ pm8001_dbg(pm8001_ha, INIT, "PHY START REQ for phy_id %d\n", phy_id);
payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
pm80xx_chip_interrupt_disable(pm8001_ha, vec);
- PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
- "irq vec %d, ODMR:0x%x\n",
- vec, pm8001_cr32(pm8001_ha, 0, 0x30)));
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "irq vec %d, ODMR:0x%x\n",
+ vec, pm8001_cr32(pm8001_ha, 0, 0x30));
process_oq(pm8001_ha, vec);
pm80xx_chip_interrupt_enable(pm8001_ha, vec);
return IRQ_HANDLED;
memset(&payload, 0, sizeof(payload));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
if (rc)
- PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
+ pm8001_dbg(pm8001_ha, FAIL, "Invalid tag\n");
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = cpu_to_le32(tag);
payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid & 0xFF));
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk(" phy profile command for phy %x ,length is %d\n",
- payload.ppc_phyid, length));
+ pm8001_dbg(pm8001_ha, INIT,
+ " phy profile command for phy %x ,length is %d\n",
+ payload.ppc_phyid, length);
for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) {
payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i));
j++;
SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
length = length + PHY_DWORD_LENGTH;
}
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
+ pm8001_dbg(pm8001_ha, INIT, "phy settings completed\n");
}
void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
rc = pm8001_tag_alloc(pm8001_ha, &tag);
if (rc)
- PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Invalid tag"));
+ pm8001_dbg(pm8001_ha, INIT, "Invalid tag\n");
circularQ = &pm8001_ha->inbnd_q_tbl[0];
opc = OPC_INB_SET_PHY_PROFILE;
if (rc)
pm8001_tag_free(pm8001_ha, tag);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PHY %d settings applied", phy));
+ pm8001_dbg(pm8001_ha, INIT, "PHY %d settings applied\n", phy);
}
const struct pm8001_dispatch pm8001_80xx_dispatch = {
.name = "pmc80xx",
projects / linux-2.6-microblaze.git / commitdiff