}
if (acm->susp_count) {
- if (acm->putbuffer) {
- /* now to preserve order */
- usb_anchor_urb(acm->putbuffer->urb, &acm->delayed);
- acm->putbuffer = NULL;
- }
usb_anchor_urb(wb->urb, &acm->delayed);
spin_unlock_irqrestore(&acm->write_lock, flags);
return count;
- } else {
- if (acm->putbuffer) {
- /* at this point there is no good way to handle errors */
- acm_start_wb(acm, acm->putbuffer);
- acm->putbuffer = NULL;
- }
}
stat = acm_start_wb(acm, wb);
return count;
}
-static void acm_tty_flush_chars(struct tty_struct *tty)
-{
- struct acm *acm = tty->driver_data;
- struct acm_wb *cur;
- int err;
- unsigned long flags;
-
- spin_lock_irqsave(&acm->write_lock, flags);
-
- cur = acm->putbuffer;
- if (!cur) /* nothing to do */
- goto out;
-
- acm->putbuffer = NULL;
- err = usb_autopm_get_interface_async(acm->control);
- if (err < 0) {
- cur->use = 0;
- acm->putbuffer = cur;
- goto out;
- }
-
- if (acm->susp_count)
- usb_anchor_urb(cur->urb, &acm->delayed);
- else
- acm_start_wb(acm, cur);
-out:
- spin_unlock_irqrestore(&acm->write_lock, flags);
- return;
-}
-
-static int acm_tty_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct acm *acm = tty->driver_data;
- struct acm_wb *cur;
- int wbn;
- unsigned long flags;
-
-overflow:
- cur = acm->putbuffer;
- if (!cur) {
- spin_lock_irqsave(&acm->write_lock, flags);
- wbn = acm_wb_alloc(acm);
- if (wbn >= 0) {
- cur = &acm->wb[wbn];
- acm->putbuffer = cur;
- }
- spin_unlock_irqrestore(&acm->write_lock, flags);
- if (!cur)
- return 0;
- }
-
- if (cur->len == acm->writesize) {
- acm_tty_flush_chars(tty);
- goto overflow;
- }
-
- cur->buf[cur->len++] = ch;
- return 1;
-}
-
static int acm_tty_write_room(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
.cleanup = acm_tty_cleanup,
.hangup = acm_tty_hangup,
.write = acm_tty_write,
- .put_char = acm_tty_put_char,
- .flush_chars = acm_tty_flush_chars,
.write_room = acm_tty_write_room,
.ioctl = acm_tty_ioctl,
.throttle = acm_tty_throttle,
unsigned long read_urbs_free;
struct urb *read_urbs[ACM_NR];
struct acm_rb read_buffers[ACM_NR];
- struct acm_wb *putbuffer; /* for acm_tty_put_char() */
int rx_buflimit;
spinlock_t read_lock;
u8 *notification_buffer; /* to reassemble fragmented notifications */
set_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
- rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
spin_lock_irq(&desc->iuspin);
if (rv) {
dev_err(&desc->intf->dev,
}
EXPORT_SYMBOL_GPL(of_usb_update_otg_caps);
+/**
+ * usb_of_get_companion_dev - Find the companion device
+ * @dev: the device pointer to find a companion
+ *
+ * Find the companion device from platform bus.
+ *
+ * Takes a reference to the returned struct device which needs to be dropped
+ * after use.
+ *
+ * Return: On success, a pointer to the companion device, %NULL on failure.
+ */
+struct device *usb_of_get_companion_dev(struct device *dev)
+{
+ struct device_node *node;
+ struct platform_device *pdev = NULL;
+
+ node = of_parse_phandle(dev->of_node, "companion", 0);
+ if (node)
+ pdev = of_find_device_by_node(node);
+
+ of_node_put(node);
+
+ return pdev ? &pdev->dev : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_companion_dev);
#endif
MODULE_LICENSE("GPL");
event == PM_EVENT_RESTORE);
if (retval) {
dev_err(dev, "PCI post-resume error %d!\n", retval);
- if (hcd->shared_hcd)
- usb_hc_died(hcd->shared_hcd);
usb_hc_died(hcd);
}
}
* is submitted that needs that bandwidth. Some other operating systems
* allocate bandwidth early, when a configuration is chosen.
*
+ * xHCI reserves bandwidth and configures the alternate setting in
+ * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting
+ * may be disabled. Drivers cannot rely on any particular alternate
+ * setting being in effect after a failure.
+ *
* This call is synchronous, and may not be used in an interrupt context.
* Also, drivers must not change altsettings while urbs are scheduled for
* endpoints in that interface; all such urbs must first be completed
alternate);
return -EINVAL;
}
+ /*
+ * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth,
+ * including freeing dropped endpoint ring buffers.
+ * Make sure the interface endpoints are flushed before that
+ */
+ usb_disable_interface(dev, iface, false);
/* Make sure we have enough bandwidth for this alternate interface.
* Remove the current alt setting and add the new alt setting.
return NULL;
}
EXPORT_SYMBOL_GPL(usb_of_get_interface_node);
-
-/**
- * usb_of_get_companion_dev - Find the companion device
- * @dev: the device pointer to find a companion
- *
- * Find the companion device from platform bus.
- *
- * Takes a reference to the returned struct device which needs to be dropped
- * after use.
- *
- * Return: On success, a pointer to the companion device, %NULL on failure.
- */
-struct device *usb_of_get_companion_dev(struct device *dev)
-{
- struct device_node *node;
- struct platform_device *pdev = NULL;
-
- node = of_parse_phandle(dev->of_node, "companion", 0);
- if (node)
- pdev = of_find_device_by_node(node);
-
- of_node_put(node);
-
- return pdev ? &pdev->dev : NULL;
-}
-EXPORT_SYMBOL_GPL(usb_of_get_companion_dev);
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
+ { USB_DEVICE(0x0218, 0x0201), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* WORLDE easy key (easykey.25) MIDI controller */
{ USB_DEVICE(0x0218, 0x0401), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* DJI CineSSD */
+ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
- hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
-
retval = dwc2_lowlevel_hw_init(hsotg);
if (retval)
return retval;
if (retval)
return retval;
+ hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
retval = dwc2_get_dr_mode(hsotg);
if (retval)
goto error;
return 0;
}
-#ifdef CONFIG_PM
-static int dwc3_of_simple_runtime_suspend(struct device *dev)
+static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
int i;
return 0;
}
-static int dwc3_of_simple_runtime_resume(struct device *dev)
+static int __maybe_unused dwc3_of_simple_runtime_resume(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
int ret;
return 0;
}
-static int dwc3_of_simple_suspend(struct device *dev)
+static int __maybe_unused dwc3_of_simple_suspend(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
return 0;
}
-static int dwc3_of_simple_resume(struct device *dev)
+static int __maybe_unused dwc3_of_simple_resume(struct device *dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
return 0;
}
-#endif
static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_of_simple_suspend, dwc3_of_simple_resume)
u32 value;
reg = pcim_iomap(pci, GP_RWBAR, 0);
- if (IS_ERR(reg))
- return PTR_ERR(reg);
+ if (!reg)
+ return -ENOMEM;
value = readl(reg + GP_RWREG1);
if (!(value & GP_RWREG1_ULPI_REFCLK_DISABLE))
/**
* dwc3_gadget_start_config - configure ep resources
- * @dwc: pointer to our controller context structure
* @dep: endpoint that is being enabled
*
* Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
static int fotg210_udc_remove(struct platform_device *pdev)
{
struct fotg210_udc *fotg210 = platform_get_drvdata(pdev);
+ int i;
usb_del_gadget_udc(&fotg210->gadget);
iounmap(fotg210->reg);
free_irq(platform_get_irq(pdev, 0), fotg210);
fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
+ for (i = 0; i < FOTG210_MAX_NUM_EP; i++)
+ kfree(fotg210->ep[i]);
kfree(fotg210);
return 0;
/* initialize udc */
fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL);
if (fotg210 == NULL)
- goto err_alloc;
+ goto err;
for (i = 0; i < FOTG210_MAX_NUM_EP; i++) {
_ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL);
fotg210->reg = ioremap(res->start, resource_size(res));
if (fotg210->reg == NULL) {
pr_err("ioremap error.\n");
- goto err_map;
+ goto err_alloc;
}
spin_lock_init(&fotg210->lock);
fotg210->ep0_req = fotg210_ep_alloc_request(&fotg210->ep[0]->ep,
GFP_KERNEL);
if (fotg210->ep0_req == NULL)
- goto err_req;
+ goto err_map;
fotg210_init(fotg210);
fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req);
err_map:
- if (fotg210->reg)
- iounmap(fotg210->reg);
+ iounmap(fotg210->reg);
err_alloc:
+ for (i = 0; i < FOTG210_MAX_NUM_EP; i++)
+ kfree(fotg210->ep[i]);
kfree(fotg210);
+err:
return ret;
}
writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
} else {
writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
- stop_activity(dev, dev->driver);
+ stop_activity(dev, NULL);
}
spin_unlock_irqrestore(&dev->lock, flags);
+ if (!is_on && dev->driver)
+ dev->driver->disconnect(&dev->gadget);
+
return 0;
}
nuke(&dev->ep[i]);
/* report disconnect; the driver is already quiesced */
- if (driver)
+ if (driver) {
+ spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
usb_reinit(dev);
}
BIT(PCI_RETRY_ABORT_INTERRUPT))
static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
+__releases(dev->lock)
+__acquires(dev->lock)
{
struct net2280_ep *ep;
u32 tmp, num, mask, scratch;
if (disconnect || reset) {
stop_activity(dev, dev->driver);
ep0_start(dev);
+ spin_unlock(&dev->lock);
if (reset)
usb_gadget_udc_reset
(&dev->gadget, dev->driver);
else
(dev->driver->disconnect)
(&dev->gadget);
+ spin_lock(&dev->lock);
return;
}
}
tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT);
if (stat & tmp) {
writel(tmp, &dev->regs->irqstat1);
+ spin_unlock(&dev->lock);
if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) {
if (dev->driver->suspend)
dev->driver->suspend(&dev->gadget);
dev->driver->resume(&dev->gadget);
/* at high speed, note erratum 0133 */
}
+ spin_lock(&dev->lock);
stat &= ~tmp;
}
switch (speed) {
case USB_STA_SPEED_SS:
usb3->gadget.speed = USB_SPEED_SUPER;
+ usb3->gadget.ep0->maxpacket = USB3_EP0_SS_MAX_PACKET_SIZE;
break;
case USB_STA_SPEED_HS:
usb3->gadget.speed = USB_SPEED_HIGH;
+ usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE;
break;
case USB_STA_SPEED_FS:
usb3->gadget.speed = USB_SPEED_FULL;
+ usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE;
break;
default:
usb3->gadget.speed = USB_SPEED_UNKNOWN;
/* for control pipe */
usb3->gadget.ep0 = &usb3_ep->ep;
usb_ep_set_maxpacket_limit(&usb3_ep->ep,
- USB3_EP0_HSFS_MAX_PACKET_SIZE);
+ USB3_EP0_SS_MAX_PACKET_SIZE);
usb3_ep->ep.caps.type_control = true;
usb3_ep->ep.caps.dir_in = true;
usb3_ep->ep.caps.dir_out = true;
} else {
int frame = 0;
dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n");
- msleep(100);
+ mdelay(100);
return frame;
}
}
in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
in_ep_ctx->deq = out_ep_ctx->deq;
in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+ if (xhci->quirks & XHCI_MTK_HOST) {
+ in_ep_ctx->reserved[0] = out_ep_ctx->reserved[0];
+ in_ep_ctx->reserved[1] = out_ep_ctx->reserved[1];
+ }
}
/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
{
const struct xhci_plat_priv *priv_match;
const struct hc_driver *driver;
- struct device *sysdev;
+ struct device *sysdev, *tmpdev;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
goto disable_clk;
}
- if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
- xhci->quirks |= XHCI_HW_LPM_DISABLE;
+ /* imod_interval is the interrupt moderation value in nanoseconds. */
+ xhci->imod_interval = 40000;
- if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
- xhci->quirks |= XHCI_LPM_SUPPORT;
+ /* Iterate over all parent nodes for finding quirks */
+ for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
- if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
- xhci->quirks |= XHCI_BROKEN_PORT_PED;
+ if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
+ xhci->quirks |= XHCI_HW_LPM_DISABLE;
- /* imod_interval is the interrupt moderation value in nanoseconds. */
- xhci->imod_interval = 40000;
- device_property_read_u32(sysdev, "imod-interval-ns",
- &xhci->imod_interval);
+ if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
+ xhci->quirks |= XHCI_LPM_SUPPORT;
+
+ if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
+ xhci->quirks |= XHCI_BROKEN_PORT_PED;
+
+ device_property_read_u32(tmpdev, "imod-interval-ns",
+ &xhci->imod_interval);
+ }
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
module_param(quirks, ullong, S_IRUGO);
MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
+{
+ struct xhci_segment *seg = ring->first_seg;
+
+ if (!td || !td->start_seg)
+ return false;
+ do {
+ if (seg == td->start_seg)
+ return true;
+ seg = seg->next;
+ } while (seg && seg != ring->first_seg);
+
+ return false;
+}
+
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
goto done;
}
+ /*
+ * check ring is not re-allocated since URB was enqueued. If it is, then
+ * make sure none of the ring related pointers in this URB private data
+ * are touched, such as td_list, otherwise we overwrite freed data
+ */
+ if (!td_on_ring(&urb_priv->td[0], ep_ring)) {
+ xhci_err(xhci, "Canceled URB td not found on endpoint ring");
+ for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) {
+ td = &urb_priv->td[i];
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
+ goto err_giveback;
+ }
+
if (xhci->xhc_state & XHCI_STATE_HALTED) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"HC halted, freeing TD manually.");
mask &= 0x0f;
val &= 0x0f;
d = (priv->reg[1] & (~mask)) ^ val;
- if (set_1284_register(pp, 2, d, GFP_KERNEL))
+ if (set_1284_register(pp, 2, d, GFP_ATOMIC))
return 0;
priv->reg[1] = d;
return d & 0xf;
{
unsigned char ret;
- if (get_1284_register(pp, 1, &ret, GFP_KERNEL))
+ if (get_1284_register(pp, 1, &ret, GFP_ATOMIC))
return 0;
return ret & 0xf8;
}
spin_unlock_irqrestore(&dev->lock, flags);
mutex_unlock(&dev->io_mutex);
+ if (WARN_ON_ONCE(len >= sizeof(in_buffer)))
+ return -EIO;
+
return simple_read_from_buffer(buffer, count, ppos, in_buffer, len);
}
{
struct usb_yurex *dev;
int i, set = 0, retval = 0;
- char buffer[16];
+ char buffer[16 + 1];
char *data = buffer;
unsigned long long c, c2 = 0;
signed long timeout = 0;
DEFINE_WAIT(wait);
- count = min(sizeof(buffer), count);
+ count = min(sizeof(buffer) - 1, count);
dev = file->private_data;
/* verify that we actually have some data to write */
retval = -EFAULT;
goto error;
}
+ buffer[count] = 0;
memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE);
switch (buffer[0]) {
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
- if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+ if (mtu->is_u3_ip)
+ mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+ SSUSB_U3_PORT_DUAL_MODE);
+ }
return ssusb_check_clocks(mtu->ssusb, check_clk);
}
/* U3D_SSUSB_U3_CTRL_0P */
#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
+#define SSUSB_U3_PORT_DUAL_MODE BIT(7)
#define SSUSB_U3_PORT_HOST_SEL BIT(2)
#define SSUSB_U3_PORT_PDN BIT(1)
#define SSUSB_U3_PORT_DIS BIT(0)
} __attribute__((packed));
-#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3)
+#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01)
#define TIUMP_GET_FUNC_FROM_CODE(c) ((c) & 0x0f)
#define TIUMP_INTERRUPT_CODE_LSR 0x03
#define TIUMP_INTERRUPT_CODE_MSR 0x04
static int ti_get_port_from_code(unsigned char code)
{
- return (code >> 4) - 3;
+ return (code >> 6) & 0x01;
}
static int ti_get_func_from_code(unsigned char code)
return 0;
}
+ if ((us->fflags & US_FL_NO_ATA_1X) &&
+ (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
+ memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB));
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ done(srb);
+ return 0;
+ }
+
/* enqueue the command and wake up the control thread */
srb->scsi_done = done;
us->srb = srb;
sdev->skip_ms_page_8 = 1;
sdev->wce_default_on = 1;
}
+
+ /*
+ * Some disks return the total number of blocks in response
+ * to READ CAPACITY rather than the highest block number.
+ * If this device makes that mistake, tell the sd driver.
+ */
+ if (devinfo->flags & US_FL_FIX_CAPACITY)
+ sdev->fix_capacity = 1;
+
+ /*
+ * Some devices don't like MODE SENSE with page=0x3f,
+ * which is the command used for checking if a device
+ * is write-protected. Now that we tell the sd driver
+ * to do a 192-byte transfer with this command the
+ * majority of devices work fine, but a few still can't
+ * handle it. The sd driver will simply assume those
+ * devices are write-enabled.
+ */
+ if (devinfo->flags & US_FL_NO_WP_DETECT)
+ sdev->skip_ms_page_3f = 1;
+
scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
return 0;
}
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
+/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */
+UNUSUAL_DEV( 0x2ca3, 0x0031, 0x0000, 0x9999,
+ "DJI",
+ "CineSSD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/*
* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
/* API for the port drivers */
/**
- * typec_match_altmode - Match SVID to an array of alternate modes
+ * typec_match_altmode - Match SVID and mode to an array of alternate modes
* @altmodes: Array of alternate modes
- * @n: Number of elements in the array, or -1 for NULL termiated arrays
+ * @n: Number of elements in the array, or -1 for NULL terminated arrays
* @svid: Standard or Vendor ID to match with
+ * @mode: Mode to match with
*
- * Return pointer to an alternate mode with SVID mathing @svid, or NULL when no
+ * Return pointer to an alternate mode with SVID matching @svid, or NULL when no
* match is found.
*/
struct typec_altmode *typec_match_altmode(struct typec_altmode **altmodes,
* typec_port_register_altmode - Register USB Type-C Port Alternate Mode
* @port: USB Type-C Port that supports the alternate mode
* @desc: Description of the alternate mode
- * @drvdata: Private pointer to driver specific info
*
* This routine is used to register an alternate mode that @port is capable of
* supporting.
* struct typec_device_id - USB Type-C alternate mode identifiers
* @svid: Standard or Vendor ID
* @mode: Mode index
+ * @driver_data: Driver specific data
*/
struct typec_device_id {
__u16 svid;
projects / linux-2.6-microblaze.git / commitdiff