* Author: Daire McNamara <daire.mcnamara@microchip.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include "../pci.h"
/* Number of MSI IRQs */
-#define MC_NUM_MSI_IRQS 32
-#define MC_NUM_MSI_IRQS_CODED 5
+#define MC_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
#define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u
#define DMA_END_ENGINE_0_SHIFT 0
#define IMASK_HOST 0x188
#define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190
-#define MSI_ADDR 0x190
#define ISTATUS_MSI 0x194
/* PCIe Master table init defines */
/* PCIe Config space MSI capability structure */
#define MC_MSI_CAP_CTRL_OFFSET 0xe0u
-#define MC_MSI_MAX_Q_AVAIL (MC_NUM_MSI_IRQS_CODED << 1)
-#define MC_MSI_Q_SIZE (MC_NUM_MSI_IRQS_CODED << 4)
/* Events */
#define EVENT_PCIE_L2_EXIT 0
struct irq_domain *dev_domain;
u32 num_vectors;
u64 vector_phy;
- DECLARE_BITMAP(used, MC_NUM_MSI_IRQS);
+ DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
};
struct mc_pcie {
static char poss_clks[][5] = { "fic0", "fic1", "fic2", "fic3" };
-static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *base)
+static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
{
struct mc_msi *msi = &port->msi;
- u32 cap_offset = MC_MSI_CAP_CTRL_OFFSET;
- u16 msg_ctrl = readw_relaxed(base + cap_offset + PCI_MSI_FLAGS);
+ u16 reg;
+ u8 queue_size;
- msg_ctrl |= PCI_MSI_FLAGS_ENABLE;
- msg_ctrl &= ~PCI_MSI_FLAGS_QMASK;
- msg_ctrl |= MC_MSI_MAX_Q_AVAIL;
- msg_ctrl &= ~PCI_MSI_FLAGS_QSIZE;
- msg_ctrl |= MC_MSI_Q_SIZE;
- msg_ctrl |= PCI_MSI_FLAGS_64BIT;
+ /* Fixup MSI enable flag */
+ reg = readw_relaxed(ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
+ reg |= PCI_MSI_FLAGS_ENABLE;
+ writew_relaxed(reg, ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
- writew_relaxed(msg_ctrl, base + cap_offset + PCI_MSI_FLAGS);
+ /* Fixup PCI MSI queue flags */
+ queue_size = FIELD_GET(PCI_MSI_FLAGS_QMASK, reg);
+ reg |= FIELD_PREP(PCI_MSI_FLAGS_QSIZE, queue_size);
+ writew_relaxed(reg, ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
+ /* Fixup MSI addr fields */
writel_relaxed(lower_32_bits(msi->vector_phy),
- base + cap_offset + PCI_MSI_ADDRESS_LO);
+ ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_LO);
writel_relaxed(upper_32_bits(msi->vector_phy),
- base + cap_offset + PCI_MSI_ADDRESS_HI);
+ ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
static void mc_handle_msi(struct irq_desc *desc)
{
struct mc_pcie *port = domain->host_data;
struct mc_msi *msi = &port->msi;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
unsigned long bit;
- u32 val;
mutex_lock(&msi->lock);
bit = find_first_zero_bit(msi->used, msi->num_vectors);
irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip,
domain->host_data, handle_edge_irq, NULL, NULL);
- /* Enable MSI interrupts */
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val |= PM_MSI_INT_MSI_MASK;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
-
mutex_unlock(&msi->lock);
return 0;
struct mc_pcie *port;
void __iomem *bridge_base_addr;
int ret;
+ u32 val;
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
if (!port)
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
- port->msi.vector_phy = MSI_ADDR;
- port->msi.num_vectors = MC_NUM_MSI_IRQS;
+ /* Allow enabling MSI by disabling MSI-X */
+ val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+ val &= ~MSIX_CAP_MASK;
+ writel(val, bridge_base_addr + PCIE_PCI_IRQ_DW0);
/* Hardware doesn't setup MSI by default */
mc_pcie_enable_msi(port, cfg->win);
+ /* Pick num vectors from bitfile programmed onto FPGA fabric */
+ val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+ val &= NUM_MSI_MSGS_MASK;
+ val >>= NUM_MSI_MSGS_SHIFT;
+
+ port->msi.num_vectors = 1 << val;
+
+ /* Pick vector address from design */
+ port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+
/* Configure Address Translation Table 0 for PCIe config space */
mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff,
cfg->res.start, resource_size(&cfg->res));