Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
-config ARCH_HAVE_MEMORY_PRESENT
- def_bool y
- depends on X86_32 && DISCONTIGMEM
-
config ARCH_FLATMEM_ENABLE
def_bool y
depends on X86_32 && !NUMA
-config ARCH_DISCONTIGMEM_ENABLE
- def_bool n
- depends on NUMA && X86_32
- depends on BROKEN
-
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD
// SPDX-License-Identifier: GPL-2.0
#include <asm/unistd_32.h>
+#include <asm/audit.h>
unsigned ia32_dir_class[] = {
#include <asm-generic/audit_dir_write.h>
#define APBT_MIN_FREQ 1000000
#define APBT_MMAP_SIZE 1024
-#define APBT_DEV_USED 1
-
extern void apbt_time_init(void);
-extern unsigned long apbt_quick_calibrate(void);
-extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
extern void apbt_setup_secondary_clock(void);
extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
#else /* CONFIG_APB_TIMER */
-static inline unsigned long apbt_quick_calibrate(void) {return 0; }
static inline void apbt_time_init(void) { }
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_AUDIT_H
+#define _ASM_X86_AUDIT_H
+
+int ia32_classify_syscall(unsigned int syscall);
+
+#endif /* _ASM_X86_AUDIT_H */
#define NODE_DATA(nid) (node_data[nid])
#endif /* CONFIG_NUMA */
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * generic node memory support, the following assumptions apply:
- *
- * 1) memory comes in 64Mb contiguous chunks which are either present or not
- * 2) we will not have more than 64Gb in total
- *
- * for now assume that 64Gb is max amount of RAM for whole system
- * 64Gb / 4096bytes/page = 16777216 pages
- */
-#define MAX_NR_PAGES 16777216
-#define MAX_SECTIONS 1024
-#define PAGES_PER_SECTION (MAX_NR_PAGES/MAX_SECTIONS)
-
-extern s8 physnode_map[];
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-#ifdef CONFIG_NUMA
- return((int) physnode_map[(pfn) / PAGES_PER_SECTION]);
-#else
- return 0;
-#endif
-}
-
-static inline int pfn_valid(int pfn)
-{
- int nid = pfn_to_nid(pfn);
-
- if (nid >= 0)
- return (pfn < node_end_pfn(nid));
- return 0;
-}
-
-#define early_pfn_valid(pfn) pfn_valid((pfn))
-
-#endif /* CONFIG_DISCONTIGMEM */
-
#endif /* _ASM_X86_MMZONE_32_H */
#endif /* !__ASSEMBLY__ */
/*
- * kern_addr_valid() is (1) for FLATMEM and (0) for
- * SPARSEMEM and DISCONTIGMEM
+ * kern_addr_valid() is (1) for FLATMEM and (0) for SPARSEMEM
*/
#ifdef CONFIG_FLATMEM
#define kern_addr_valid(addr) (1)
#define _ASM_X86_SPINLOCK_TYPES_H
#include <linux/types.h>
-
-#ifdef CONFIG_PARAVIRT_SPINLOCKS
-#define __TICKET_LOCK_INC 2
-#define TICKET_SLOWPATH_FLAG ((__ticket_t)1)
-#else
-#define __TICKET_LOCK_INC 1
-#define TICKET_SLOWPATH_FLAG ((__ticket_t)0)
-#endif
-
-#if (CONFIG_NR_CPUS < (256 / __TICKET_LOCK_INC))
-typedef u8 __ticket_t;
-typedef u16 __ticketpair_t;
-#else
-typedef u16 __ticket_t;
-typedef u32 __ticketpair_t;
-#endif
-
-#define TICKET_LOCK_INC ((__ticket_t)__TICKET_LOCK_INC)
-
-#define TICKET_SHIFT (sizeof(__ticket_t) * 8)
-
#include <asm-generic/qspinlock_types.h>
-
#include <asm-generic/qrwlock_types.h>
#endif /* _ASM_X86_SPINLOCK_TYPES_H */
apb_timer_block_enabled = 0;
panic("failed to enable APB timer\n");
}
-
-/* called before apb_timer_enable, use early map */
-unsigned long apbt_quick_calibrate(void)
-{
- int i, scale;
- u64 old, new;
- u64 t1, t2;
- unsigned long khz = 0;
- u32 loop, shift;
-
- apbt_set_mapping();
- dw_apb_clocksource_start(clocksource_apbt);
-
- /* check if the timer can count down, otherwise return */
- old = dw_apb_clocksource_read(clocksource_apbt);
- i = 10000;
- while (--i) {
- if (old != dw_apb_clocksource_read(clocksource_apbt))
- break;
- }
- if (!i)
- goto failed;
-
- /* count 16 ms */
- loop = (apbt_freq / 1000) << 4;
-
- /* restart the timer to ensure it won't get to 0 in the calibration */
- dw_apb_clocksource_start(clocksource_apbt);
-
- old = dw_apb_clocksource_read(clocksource_apbt);
- old += loop;
-
- t1 = rdtsc();
-
- do {
- new = dw_apb_clocksource_read(clocksource_apbt);
- } while (new < old);
-
- t2 = rdtsc();
-
- shift = 5;
- if (unlikely(loop >> shift == 0)) {
- printk(KERN_INFO
- "APBT TSC calibration failed, not enough resolution\n");
- return 0;
- }
- scale = (int)div_u64((t2 - t1), loop >> shift);
- khz = (scale * (apbt_freq / 1000)) >> shift;
- printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz);
- return khz;
-failed:
- return 0;
-}
return irq >= 0 && irq < nr_legacy_irqs();
}
-/*
- * Initialize all legacy IRQs and all pins on the first IOAPIC
- * if we have legacy interrupt controller. Kernel boot option "pirq="
- * may rely on non-legacy pins on the first IOAPIC.
- */
-static inline int mp_init_irq_at_boot(int ioapic, int irq)
-{
- if (!nr_legacy_irqs())
- return 0;
-
- return ioapic == 0 || mp_is_legacy_irq(irq);
-}
-
static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic)
{
return ioapics[ioapic].irqdomain;
#include <linux/types.h>
#include <linux/audit.h>
#include <asm/unistd.h>
+#include <asm/audit.h>
static unsigned dir_class[] = {
#include <asm-generic/audit_dir_write.h>
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_IA32_EMULATION
- extern int ia32_classify_syscall(unsigned);
if (abi == AUDIT_ARCH_I386)
return ia32_classify_syscall(syscall);
#endif
return -EINVAL;
if (!strncmp(p, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
- /*
- * If we are doing a crash dump, we still need to know
- * the real memory size before the original memory map is
- * reset.
- */
- saved_max_pfn = e820__end_of_ram_pfn();
-#endif
e820_table->nr_entries = 0;
userdef = 1;
return 0;
#include <xen/hvc-console.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
-#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
#include <linux/usb/xhci-dbgp.h>
-#include <linux/efi.h>
-#include <asm/efi.h>
#include <asm/pci_x86.h>
/* Simple VGA output */
#include <linux/atomic.h>
#include <linux/sched/clock.h>
-#if defined(CONFIG_EDAC)
-#include <linux/edac.h>
-#endif
-
#include <asm/cpu_entry_area.h>
#include <asm/traps.h>
#include <asm/mach_traps.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
-#define ICPU(model) \
- {X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF, 0}
+#define X86_MATCH(model) \
+ X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, \
+ INTEL_FAM6_##model, X86_FEATURE_APERFMPERF, NULL)
static const struct x86_cpu_id has_knl_turbo_ratio_limits[] = {
- ICPU(INTEL_FAM6_XEON_PHI_KNL),
- ICPU(INTEL_FAM6_XEON_PHI_KNM),
+ X86_MATCH(XEON_PHI_KNL),
+ X86_MATCH(XEON_PHI_KNM),
{}
};
static const struct x86_cpu_id has_skx_turbo_ratio_limits[] = {
- ICPU(INTEL_FAM6_SKYLAKE_X),
+ X86_MATCH(SKYLAKE_X),
{}
};
static const struct x86_cpu_id has_glm_turbo_ratio_limits[] = {
- ICPU(INTEL_FAM6_ATOM_GOLDMONT),
- ICPU(INTEL_FAM6_ATOM_GOLDMONT_D),
- ICPU(INTEL_FAM6_ATOM_GOLDMONT_PLUS),
+ X86_MATCH(ATOM_GOLDMONT),
+ X86_MATCH(ATOM_GOLDMONT_D),
+ X86_MATCH(ATOM_GOLDMONT_PLUS),
{}
};
} else {
pfn = pgt_buf_end;
pgt_buf_end += num;
- printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n",
- pfn << PAGE_SHIFT, (pgt_buf_end << PAGE_SHIFT) - 1);
}
for (i = 0; i < num; i++) {
#include <linux/sched/signal.h>
#include <linux/sched/mm.h>
#include <linux/compat.h>
+#include <linux/elf-randomize.h>
#include <asm/elf.h>
+#include <asm/io.h>
#include "physaddr.h"
#include "numa_internal.h"
-#ifdef CONFIG_DISCONTIGMEM
-/*
- * 4) physnode_map - the mapping between a pfn and owning node
- * physnode_map keeps track of the physical memory layout of a generic
- * numa node on a 64Mb break (each element of the array will
- * represent 64Mb of memory and will be marked by the node id. so,
- * if the first gig is on node 0, and the second gig is on node 1
- * physnode_map will contain:
- *
- * physnode_map[0-15] = 0;
- * physnode_map[16-31] = 1;
- * physnode_map[32- ] = -1;
- */
-s8 physnode_map[MAX_SECTIONS] __read_mostly = { [0 ... (MAX_SECTIONS - 1)] = -1};
-EXPORT_SYMBOL(physnode_map);
-
-void memory_present(int nid, unsigned long start, unsigned long end)
-{
- unsigned long pfn;
-
- printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
- nid, start, end);
- printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
- printk(KERN_DEBUG " ");
- start = round_down(start, PAGES_PER_SECTION);
- end = round_up(end, PAGES_PER_SECTION);
- for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
- physnode_map[pfn / PAGES_PER_SECTION] = nid;
- printk(KERN_CONT "%lx ", pfn);
- }
- printk(KERN_CONT "\n");
-}
-#endif
-
extern unsigned long highend_pfn, highstart_pfn;
void __init initmem_init(void)
[ilog2(VM_GROWSDOWN)] = "gd",
[ilog2(VM_PFNMAP)] = "pf",
[ilog2(VM_DENYWRITE)] = "dw",
-#ifdef CONFIG_X86_INTEL_MPX
- [ilog2(VM_MPX)] = "mp",
-#endif
[ilog2(VM_LOCKED)] = "lo",
[ilog2(VM_IO)] = "io",
[ilog2(VM_SEQ_READ)] = "sr",
static inline bool is_kdump_kernel(void) { return 0; }
#endif /* CONFIG_CRASH_DUMP */
-extern unsigned long saved_max_pfn;
-
/* Device Dump information to be filled by drivers */
struct vmcoredd_data {
char dump_name[VMCOREDD_MAX_NAME_BYTES]; /* Unique name of the dump */
# define VM_MAPPED_COPY VM_ARCH_1 /* T if mapped copy of data (nommu mmap) */
#endif
-#if defined(CONFIG_X86_INTEL_MPX)
-/* MPX specific bounds table or bounds directory */
-# define VM_MPX VM_HIGH_ARCH_4
-#else
-# define VM_MPX VM_NONE
-#endif
-
#ifndef VM_GROWSUP
# define VM_GROWSUP VM_NONE
#endif
#include <linux/errno.h>
#include <linux/export.h>
-/*
- * If we have booted due to a crash, max_pfn will be a very low value. We need
- * to know the amount of memory that the previous kernel used.
- */
-unsigned long saved_max_pfn;
-
/*
* stores the physical address of elf header of crash image
*
projects / linux-2.6-microblaze.git / commitdiff