Fix some AB3100 regulator issues

This patch will remove surplus register writes on shut down of
LDO D (this magic was not needed), remove an unnecessary (!) error
check and really unregister the regulators when the module is
unloaded.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 5da127b..b349db4 100644 (file)
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg)
         * LDO D is a special regulator. When it is disabled, the entire
         * system is shut down. So this is handled specially.
         */
+       pr_info("Called ab3100_disable_regulator\n");
        if (abreg->regreg == AB3100_LDO_D) {
-               int i;
-
                dev_info(&reg->dev, "disabling LDO D - shut down system\n");
-               /*
-                * Set regulators to default values, ignore any errors,
-                * we're going DOWN
-                */
-               for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-                       (void) ab3100_set_register_interruptible(abreg->ab3100,
-                                       ab3100_reg_init_order[i],
-                                       abreg->plfdata->reg_initvals[i]);
-               }
-
                /* Setting LDO D to 0x00 cuts the power to the SoC */
                return ab3100_set_register_interruptible(abreg->ab3100,
                                                         AB3100_LDO_D, 0x00U);
-
        }
 
        /*
@@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev)
                }
        }
 
-       if (err) {
-               dev_err(&pdev->dev,
-                       "LDO D regulator initialization failed with error %d\n",
-                       err);
-               return err;
-       }
-
        /* Register the regulators */
        for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
                struct ab3100_regulator *reg = &ab3100_regulators[i];
@@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void)
 
 static __exit void ab3100_regulators_exit(void)
 {
-       platform_driver_register(&ab3100_regulators_driver);
+       platform_driver_unregister(&ab3100_regulators_driver);
 }
 
 subsys_initcall(ab3100_regulators_init);