soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 consecutive...

Change the RACPREFDATA(x) setting to prefetch the next 256-byte line
after 4 consecutive lines have been used, instead of after 2 consecutive
lines. This does improve the synthetic memcpy benchmark by an additional
+0.5% on top of the previous change for Cortex-A72 CPUs.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 28f69cc..7f8dc30 100644 (file)
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -174,7 +174,7 @@ static const u32 a72_b53_mach_compat[] = {
 static void __init a72_b53_rac_enable_all(struct device_node *np)
 {
        unsigned int cpu;
-       u32 enable = 0, pref_dist;
+       u32 enable = 0, pref_dist, shift;
 
        if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
                return;
@@ -184,9 +184,13 @@ static void __init a72_b53_rac_enable_all(struct device_node *np)
 
        pref_dist = cbc_readl(RAC_CONFIG1_REG);
        for_each_possible_cpu(cpu) {
+               shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
                enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
-               if (cpubiuctrl_regs == a72_cpubiuctrl_regs)
+               if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+                       enable &= ~(RACENPREF_MASK << shift);
+                       enable |= 3 << shift;
                        pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+               }
        }
 
        cbc_writel(enable, RAC_CONFIG0_REG);