unsigned int flags;
 #define IMX_SSI_DMA            (1 << 0)
 #define IMX_SSI_USE_AC97       (1 << 1)
+#define IMX_SSI_NET            (1 << 2)
+#define IMX_SSI_SYN            (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
        void (*ac97_reset) (struct snd_ac97 *ac97);
        void (*ac97_warm_reset)(struct snd_ac97 *ac97);
 };
 
 /*
  * SSI DAI format configuration.
  * Should only be called when port is inactive (i.e. SSIEN = 0).
- * Note: We don't use the I2S modes but instead manually configure the
- * SSI for I2S because the I2S mode is only a register preset.
  */
 static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 {
                /* data on rising edge of bclk, frame low 1clk before data */
                strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
                scr |= SSI_SCR_NET;
+               if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
+                       scr &= ~SSI_I2S_MODE_MASK;
+                       scr |= SSI_SCR_I2S_MODE_SLAVE;
+               }
                break;
        case SND_SOC_DAIFMT_LEFT_J:
                /* data on rising edge of bclk, frame high with data */
 
        strcr |= SSI_STCR_TFEN0;
 
+       if (ssi->flags & IMX_SSI_NET)
+               scr |= SSI_SCR_NET;
+       if (ssi->flags & IMX_SSI_SYN)
+               scr |= SSI_SCR_SYN;
+
        writel(strcr, ssi->base + SSI_STCR);
        writel(strcr, ssi->base + SSI_SRCR);
        writel(scr, ssi->base + SSI_SCR);