arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes

Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 QRD board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink
- Bluetooth

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-8-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 4738112..e69ae61 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -23,6 +23,7 @@
 
        aliases {
                serial0 = &uart15;
+               serial1 = &uart14;
        };
 
        chosen {
@@ -45,6 +46,44 @@
                };
        };
 
+       pmic-glink {
+               compatible = "qcom,sm8650-pmic-glink",
+                            "qcom,sm8550-pmic-glink",
+                            "qcom,pmic-glink";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+               connector@0 {
+                       compatible = "usb-c-connector";
+                       reg = <0>;
+
+                       power-role = "dual";
+                       data-role = "dual";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       pmic_glink_hs_in: endpoint {
+                                               remote-endpoint = <&usb_1_dwc3_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       pmic_glink_ss_in: endpoint {
+                                               remote-endpoint = <&usb_1_dwc3_ss>;
+                                       };
+                               };
+                       };
+               };
+       };
+
        vph_pwr: vph-pwr-regulator {
                compatible = "regulator-fixed";
 
@@ -399,6 +438,81 @@
        };
 };
 
+&dispcc {
+       status = "okay";
+};
+
+&gpi_dma1 {
+       status = "okay";
+};
+
+&mdss {
+       status = "okay";
+};
+
+&mdss_dsi0 {
+       vdda-supply = <&vreg_l3i_1p2>;
+
+       status = "okay";
+
+       panel@0 {
+               compatible = "visionox,vtdr6130";
+               reg = <0>;
+
+               reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+               vddio-supply = <&vreg_l12b_1p8>;
+               vci-supply = <&vreg_l13b_3p0>;
+               vdd-supply = <&vreg_l11b_1p2>;
+
+               pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+               pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+               pinctrl-names = "default", "sleep";
+
+               port {
+                       panel0_in: endpoint {
+                               remote-endpoint = <&mdss_dsi0_out>;
+                       };
+               };
+       };
+};
+
+&mdss_dsi0_out {
+       remote-endpoint = <&panel0_in>;
+       data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+       vdds-supply = <&vreg_l1i_0p88>;
+
+       status = "okay";
+};
+
+&mdss_mdp {
+       status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+       clock-frequency = <1000>;
+};
+
+&pcie0 {
+       wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+       perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+       pinctrl-0 = <&pcie0_default_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pcie0_phy {
+       vdda-phy-supply = <&vreg_l1i_0p88>;
+       vdda-pll-supply = <&vreg_l3i_1p2>;
+
+       status = "okay";
+};
+
 &pon_pwrkey {
        status = "okay";
 };
@@ -479,23 +593,173 @@
        status = "okay";
 };
 
+&qupv3_id_0 {
+       status = "okay";
+};
+
 &qupv3_id_1 {
        status = "okay";
 };
 
+&remoteproc_adsp {
+       firmware-name = "qcom/sm8650/adsp.mbn",
+                       "qcom/sm8650/adsp_dtb.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/sm8650/cdsp.mbn",
+                       "qcom/sm8650/cdsp_dtb.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_mpss {
+       firmware-name = "qcom/sm8650/modem.mbn",
+                       "qcom/sm8650/modem_dtb.mbn";
+
+       status = "okay";
+};
+
 &sleep_clk {
        clock-frequency = <32000>;
 };
 
+&spi4 {
+       status = "okay";
+
+       touchscreen@0 {
+               compatible = "goodix,gt9916";
+               reg = <0>;
+
+               interrupt-parent = <&tlmm>;
+               interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+               reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+               avdd-supply = <&vreg_l14b_3p2>;
+
+               spi-max-frequency = <1000000>;
+
+               touchscreen-size-x = <1080>;
+               touchscreen-size-y = <2400>;
+
+               pinctrl-0 = <&ts_irq>, <&ts_reset>;
+               pinctrl-names = "default";
+       };
+};
+
 &tlmm {
        /* Reserved I/Os for NFC */
        gpio-reserved-ranges = <32 8>;
+
+       bt_default: bt-default-state {
+               bt-en-pins {
+                       pins = "gpio17";
+                       function = "gpio";
+                       drive-strength = <16>;
+                       bias-disable;
+               };
+
+               sw-ctrl-pins {
+                       pins = "gpio18";
+                       function = "gpio";
+                       bias-pull-down;
+               };
+       };
+
+       disp0_reset_n_active: disp0-reset-n-active-state {
+               pins = "gpio133";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-disable;
+       };
+
+       disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+               pins = "gpio133";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+
+       mdp_vsync_active: mdp-vsync-active-state {
+               pins = "gpio86";
+               function = "mdp_vsync";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+
+       mdp_vsync_suspend: mdp-vsync-suspend-state {
+               pins = "gpio86";
+               function = "mdp_vsync";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+
+       ts_irq: ts-irq-state {
+               pins = "gpio161";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-pull-up;
+               output-disable;
+       };
+
+       ts_reset: ts-reset-state {
+               pins = "gpio162";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-pull-up;
+       };
+};
+
+&uart14 {
+       status = "okay";
+
+       bluetooth {
+               compatible = "qcom,wcn7850-bt";
+
+               clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+               vddio-supply = <&vreg_l3c_1p2>;
+               vddaon-supply = <&vreg_l15b_1p8>;
+               vdddig-supply = <&vreg_s3c_0p9>;
+               vddrfa0p8-supply = <&vreg_s3c_0p9>;
+               vddrfa1p2-supply = <&vreg_s1c_1p2>;
+               vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+               max-speed = <3200000>;
+
+               enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+               swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-0 = <&bt_default>;
+               pinctrl-names = "default";
+       };
 };
 
 &uart15 {
        status = "okay";
 };
 
+&ufs_mem_hc {
+       reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+       vcc-supply = <&vreg_l17b_2p5>;
+       vcc-max-microamp = <1300000>;
+       vccq-supply = <&vreg_l1c_1p2>;
+       vccq-max-microamp = <1200000>;
+
+       status = "okay";
+};
+
+&ufs_mem_phy {
+       vdda-phy-supply = <&vreg_l1d_0p88>;
+       vdda-pll-supply = <&vreg_l3i_1p2>;
+
+       status = "okay";
+};
+
 /*
  * DPAUX -> WCD9395 -> USB_SBU -> USB-C
  * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
@@ -507,7 +771,16 @@
 };
 
 &usb_1_dwc3 {
-       dr_mode = "peripheral";
+       dr_mode = "otg";
+       usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+       remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+       remote-endpoint = <&pmic_glink_ss_in>;
 };
 
 &usb_1_hsphy {