staging: comedi: s626: factor counter interrupt handling from s626_irq_handler()
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Fri, 22 Mar 2013 22:56:13 +0000 (15:56 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 25 Mar 2013 18:44:44 +0000 (11:44 -0700)
Factor the code that handles the counter interrupt out of s626_irq_handler().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/s626.c

index 0e4ce52..fe768e7 100644 (file)
@@ -727,6 +727,79 @@ static void check_dio_interrupts(struct comedi_device *dev)
        }
 }
 
+static void check_counter_interrupts(struct comedi_device *dev)
+{
+       struct s626_private *devpriv = dev->private;
+       struct comedi_subdevice *s = dev->read_subdev;
+       struct comedi_async *async = s->async;
+       struct comedi_cmd *cmd = &async->cmd;
+       struct enc_private *k;
+       uint16_t irqbit;
+
+       /* read interrupt type */
+       irqbit = DEBIread(dev, LP_RDMISC2);
+
+       /* check interrupt on counters */
+       if (irqbit & IRQ_COINT1A) {
+               k = &encpriv[0];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+       }
+       if (irqbit & IRQ_COINT2A) {
+               k = &encpriv[1];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+       }
+       if (irqbit & IRQ_COINT3A) {
+               k = &encpriv[2];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+       }
+       if (irqbit & IRQ_COINT1B) {
+               k = &encpriv[3];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+       }
+       if (irqbit & IRQ_COINT2B) {
+               k = &encpriv[4];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+
+               if (devpriv->ai_convert_count > 0) {
+                       devpriv->ai_convert_count--;
+                       if (devpriv->ai_convert_count == 0)
+                               k->SetEnable(dev, k, CLKENAB_INDEX);
+
+                       if (cmd->convert_src == TRIG_TIMER) {
+                               /*  Trigger ADC scan loop start by setting RPS Signal 0. */
+                               MC_ENABLE(P_MC2, MC2_ADC_RPS);
+                       }
+               }
+       }
+       if (irqbit & IRQ_COINT3B) {
+               k = &encpriv[5];
+
+               /* clear interrupt capture flag */
+               k->ResetCapFlags(dev, k);
+
+               if (cmd->scan_begin_src == TRIG_TIMER) {
+                       /*  Trigger ADC scan loop start by setting RPS Signal 0. */
+                       MC_ENABLE(P_MC2, MC2_ADC_RPS);
+               }
+
+               if (cmd->convert_src == TRIG_TIMER) {
+                       k = &encpriv[4];
+                       devpriv->ai_convert_count = cmd->chanlist_len;
+                       k->SetEnable(dev, k, CLKENAB_ALWAYS);
+               }
+       }
+}
+
 static bool handle_eos_interrupt(struct comedi_device *dev)
 {
        struct s626_private *devpriv = dev->private;
@@ -789,13 +862,8 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 {
        struct comedi_device *dev = d;
        struct s626_private *devpriv = dev->private;
-       struct comedi_subdevice *s = dev->read_subdev;
-       struct comedi_async *async = s->async;
-       struct comedi_cmd *cmd = &async->cmd;
-       struct enc_private *k;
        unsigned long flags;
        uint32_t irqtype, irqstatus;
-       uint16_t irqbit;
 
        if (!dev->attached)
                return IRQ_NONE;
@@ -821,71 +889,9 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
                break;
        case IRQ_GPIO3: /* check dio and conter interrupt */
                /* s626_dio_clear_irq(dev); */
-
                check_dio_interrupts(dev);
-
-               /* read interrupt type */
-               irqbit = DEBIread(dev, LP_RDMISC2);
-
-               /* check interrupt on counters */
-               if (irqbit & IRQ_COINT1A) {
-                       k = &encpriv[0];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-               }
-               if (irqbit & IRQ_COINT2A) {
-                       k = &encpriv[1];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-               }
-               if (irqbit & IRQ_COINT3A) {
-                       k = &encpriv[2];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-               }
-               if (irqbit & IRQ_COINT1B) {
-                       k = &encpriv[3];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-               }
-               if (irqbit & IRQ_COINT2B) {
-                       k = &encpriv[4];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-
-                       if (devpriv->ai_convert_count > 0) {
-                               devpriv->ai_convert_count--;
-                               if (devpriv->ai_convert_count == 0)
-                                       k->SetEnable(dev, k, CLKENAB_INDEX);
-
-                               if (cmd->convert_src == TRIG_TIMER) {
-                                       /*  Trigger ADC scan loop start by setting RPS Signal 0. */
-                                       MC_ENABLE(P_MC2, MC2_ADC_RPS);
-                               }
-                       }
-               }
-               if (irqbit & IRQ_COINT3B) {
-                       k = &encpriv[5];
-
-                       /* clear interrupt capture flag */
-                       k->ResetCapFlags(dev, k);
-
-                       if (cmd->scan_begin_src == TRIG_TIMER) {
-                               /*  Trigger ADC scan loop start by setting RPS Signal 0. */
-                               MC_ENABLE(P_MC2, MC2_ADC_RPS);
-                       }
-
-                       if (cmd->convert_src == TRIG_TIMER) {
-                               k = &encpriv[4];
-                               devpriv->ai_convert_count = cmd->chanlist_len;
-                               k->SetEnable(dev, k, CLKENAB_ALWAYS);
-                       }
-               }
+               check_counter_interrupts(dev);
+               break;
        }
 
        /* enable interrupt */