clocksource/drivers/vf-pit: Replace raw_readl/writel to readl/writel

The driver uses the raw_readl() and raw_writel() functions. Those are
not for MMIO devices. Replace them with readl() and writel()

[ dlezcano: Fixed typo in the subject s/reald/readl/ ]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250804152344.1109310-2-daniel.lezcano@linaro.org

diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index 911c921..8041a8f 100644 (file)
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -35,30 +35,30 @@ static unsigned long cycle_per_jiffy;
 
 static inline void pit_timer_enable(void)
 {
-       __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+       writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
 }
 
 static inline void pit_timer_disable(void)
 {
-       __raw_writel(0, clkevt_base + PITTCTRL);
+       writel(0, clkevt_base + PITTCTRL);
 }
 
 static inline void pit_irq_acknowledge(void)
 {
-       __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+       writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 }
 
 static u64 notrace pit_read_sched_clock(void)
 {
-       return ~__raw_readl(clksrc_base + PITCVAL);
+       return ~readl(clksrc_base + PITCVAL);
 }
 
 static int __init pit_clocksource_init(unsigned long rate)
 {
        /* set the max load value and start the clock source counter */
-       __raw_writel(0, clksrc_base + PITTCTRL);
-       __raw_writel(~0UL, clksrc_base + PITLDVAL);
-       __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+       writel(0, clksrc_base + PITTCTRL);
+       writel(~0UL, clksrc_base + PITLDVAL);
+       writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
 
        sched_clock_register(pit_read_sched_clock, 32, rate);
        return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
@@ -76,7 +76,7 @@ static int pit_set_next_event(unsigned long delta,
         * hardware requirement.
         */
        pit_timer_disable();
-       __raw_writel(delta - 1, clkevt_base + PITLDVAL);
+       writel(delta - 1, clkevt_base + PITLDVAL);
        pit_timer_enable();
 
        return 0;
@@ -125,8 +125,8 @@ static struct clock_event_device clockevent_pit = {
 
 static int __init pit_clockevent_init(unsigned long rate, int irq)
 {
-       __raw_writel(0, clkevt_base + PITTCTRL);
-       __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+       writel(0, clkevt_base + PITTCTRL);
+       writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 
        BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
                           "VF pit timer", &clockevent_pit));
@@ -183,7 +183,7 @@ static int __init pit_timer_init(struct device_node *np)
        cycle_per_jiffy = clk_rate / (HZ);
 
        /* enable the pit module */
-       __raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+       writel(~PITMCR_MDIS, timer_base + PITMCR);
 
        ret = pit_clocksource_init(clk_rate);
        if (ret)