clk: eyeq: add EyeQ6H central fixed factor clocks

Previous setup was:
 - pll-cpu clock registered from driver at of_clk_init();
 - occ-cpu clock registered from DT using fixed-factor-clock compatible.

Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register occ-cpu.

Also switch from hard-coded index 0 for pll-cpu to using the
EQ6HC_CENTRAL_PLL_CPU constant by exposed dt-bindings headers.

occ-cpu is exposed at of_clk_init() because it gets used by both the DT
CPU nodes and the GIC timer.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-7-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c
index 5429090..a042e97 100644 (file)
--- a/drivers/clk/clk-eyeq.c
+++ b/drivers/clk/clk-eyeq.c
@@ -695,12 +695,19 @@ builtin_platform_driver(eqc_driver);
 
 /* Required early for GIC timer. */
 static const struct eqc_pll eqc_eyeq6h_central_early_plls[] = {
-       { .index = 0, .name = "pll-cpu", .reg64 = 0x02C },
+       { .index = EQ6HC_CENTRAL_PLL_CPU, .name = "pll-cpu", .reg64 = 0x02C },
+};
+
+static const struct eqc_fixed_factor eqc_eyeq6h_central_early_fixed_factors[] = {
+       { EQ6HC_CENTRAL_CPU_OCC, "occ-cpu", 1, 1, EQ6HC_CENTRAL_PLL_CPU },
 };
 
 static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __initconst = {
        .early_pll_count        = ARRAY_SIZE(eqc_eyeq6h_central_early_plls),
        .early_plls             = eqc_eyeq6h_central_early_plls,
+
+       .early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_central_early_fixed_factors),
+       .early_fixed_factors = eqc_eyeq6h_central_early_fixed_factors,
 };
 
 /* Required early for UART. */