hwmon: (sht4x) Fix sht4x_read_values return value

Kernel doc for sht4x_read_values() shows 0 on success, 1 on failure but
the return value on success is actually always positive as it is set to
SHT4X_RESPONSE_LENGTH by a successful call to i2c_master_recv().

Miscellanea:

o Update the kernel doc for sht4x_read_values to 0 for success or -ERRNO
o Remove incorrectly used kernel doc /** header for other _read functions
o Typo fix succesfull->successful
o Reverse a test to unindent a block and use goto unlock
o Declare cmd[SHT4X_CMD_LEN] rather than cmd[]

At least for gcc 10.2, object size is reduced a tiny bit.

$ size drivers/hwmon/sht4x.o*
   text	   data	    bss	    dec	    hex	filename
   1752	    404	    256	   2412	    96c	drivers/hwmon/sht4x.o.new
   1825	    404	    256	   2485	    9b5	drivers/hwmon/sht4x.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/60eedce497137eb34448c0c77e01ec9d9c972ad7.camel@perches.com
Reviewed by: Navin Sankar Velliangiri <navin@linumiz.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/sht4x.c b/drivers/hwmon/sht4x.c
index 1dc51ee..09c2a0b 100644 (file)
--- a/drivers/hwmon/sht4x.c
+++ b/drivers/hwmon/sht4x.c
@@ -67,7 +67,7 @@ struct sht4x_data {
 /**
  * sht4x_read_values() - read and parse the raw data from the SHT4X
  * @sht4x_data: the struct sht4x_data to use for the lock
- * Return: 0 if succesfull, 1 if not
+ * Return: 0 if successful, -ERRNO if not
  */
 static int sht4x_read_values(struct sht4x_data *data)
 {
@@ -75,51 +75,53 @@ static int sht4x_read_values(struct sht4x_data *data)
        u16 t_ticks, rh_ticks;
        unsigned long next_update;
        struct i2c_client *client = data->client;
-       u8 crc, raw_data[SHT4X_RESPONSE_LENGTH],
-       cmd[] = {SHT4X_CMD_MEASURE_HPM};
+       u8 crc;
+       u8 cmd[SHT4X_CMD_LEN] = {SHT4X_CMD_MEASURE_HPM};
+       u8 raw_data[SHT4X_RESPONSE_LENGTH];
 
        mutex_lock(&data->lock);
        next_update = data->last_updated +
                      msecs_to_jiffies(data->update_interval);
-       if (!data->valid || time_after(jiffies, next_update)) {
-               ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
-               if (ret < 0)
-                       goto unlock;
-
-               usleep_range(SHT4X_MEAS_DELAY,
-                            SHT4X_MEAS_DELAY + SHT4X_DELAY_EXTRA);
-
-               ret = i2c_master_recv(client, raw_data, SHT4X_RESPONSE_LENGTH);
-               if (ret != SHT4X_RESPONSE_LENGTH) {
-                       if (ret >= 0)
-                               ret = -ENODATA;
-
-                       goto unlock;
-               }
-
-               t_ticks = raw_data[0] << 8 | raw_data[1];
-               rh_ticks = raw_data[3] << 8 | raw_data[4];
-
-               crc = crc8(sht4x_crc8_table, &raw_data[0], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
-               if (crc != raw_data[2]) {
-                       dev_err(&client->dev, "data integrity check failed\n");
-                       ret = -EIO;
-                       goto unlock;
-               }
-
-               crc = crc8(sht4x_crc8_table, &raw_data[3], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
-               if (crc != raw_data[5]) {
-                       dev_err(&client->dev, "data integrity check failed\n");
-                       ret = -EIO;
-                       goto unlock;
-               }
-
-               data->temperature = ((21875 * (int32_t)t_ticks) >> 13) - 45000;
-               data->humidity = ((15625 * (int32_t)rh_ticks) >> 13) - 6000;
-               data->last_updated = jiffies;
-               data->valid = true;
+
+       if (data->valid && time_before_eq(jiffies, next_update))
+               goto unlock;
+
+       ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
+       if (ret < 0)
+               goto unlock;
+
+       usleep_range(SHT4X_MEAS_DELAY, SHT4X_MEAS_DELAY + SHT4X_DELAY_EXTRA);
+
+       ret = i2c_master_recv(client, raw_data, SHT4X_RESPONSE_LENGTH);
+       if (ret != SHT4X_RESPONSE_LENGTH) {
+               if (ret >= 0)
+                       ret = -ENODATA;
+               goto unlock;
+       }
+
+       t_ticks = raw_data[0] << 8 | raw_data[1];
+       rh_ticks = raw_data[3] << 8 | raw_data[4];
+
+       crc = crc8(sht4x_crc8_table, &raw_data[0], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+       if (crc != raw_data[2]) {
+               dev_err(&client->dev, "data integrity check failed\n");
+               ret = -EIO;
+               goto unlock;
        }
 
+       crc = crc8(sht4x_crc8_table, &raw_data[3], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+       if (crc != raw_data[5]) {
+               dev_err(&client->dev, "data integrity check failed\n");
+               ret = -EIO;
+               goto unlock;
+       }
+
+       data->temperature = ((21875 * (int32_t)t_ticks) >> 13) - 45000;
+       data->humidity = ((15625 * (int32_t)rh_ticks) >> 13) - 6000;
+       data->last_updated = jiffies;
+       data->valid = true;
+       ret = 0;
+
 unlock:
        mutex_unlock(&data->lock);
        return ret;
@@ -132,19 +134,14 @@ static ssize_t sht4x_interval_write(struct sht4x_data *data, long val)
        return 0;
 }
 
-/**
- * sht4x_interval_read() - read the minimum poll interval
- *                        in milliseconds
- */
+/* sht4x_interval_read() - read the minimum poll interval in milliseconds */
 static size_t sht4x_interval_read(struct sht4x_data *data, long *val)
 {
        *val = data->update_interval;
        return 0;
 }
 
-/**
- * sht4x_temperature1_read() - read the temperature in millidegrees
- */
+/* sht4x_temperature1_read() - read the temperature in millidegrees */
 static int sht4x_temperature1_read(struct sht4x_data *data, long *val)
 {
        int ret;
@@ -158,9 +155,7 @@ static int sht4x_temperature1_read(struct sht4x_data *data, long *val)
        return 0;
 }
 
-/**
- * sht4x_humidity1_read() - read a relative humidity in millipercent
- */
+/* sht4x_humidity1_read() - read a relative humidity in millipercent */
 static int sht4x_humidity1_read(struct sht4x_data *data, long *val)
 {
        int ret;