hinic: add support to identify physical device
authorLuo bin <luobin9@huawei.com>
Sun, 28 Jun 2020 12:36:23 +0000 (20:36 +0800)
committerDavid S. Miller <davem@davemloft.net>
Mon, 29 Jun 2020 03:40:58 +0000 (20:40 -0700)
add support to identify physical device by flashing an LED
attached to it with ethtool -p cmd.

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
drivers/net/ethernet/huawei/hinic/hinic_port.c
drivers/net/ethernet/huawei/hinic/hinic_port.h
drivers/net/ethernet/huawei/hinic/hinic_sriov.c

index 2c94b48..f012d13 100644 (file)
@@ -1684,6 +1684,39 @@ static void hinic_diag_test(struct net_device *netdev,
                netif_carrier_on(netdev);
 }
 
+static int hinic_set_phys_id(struct net_device *netdev,
+                            enum ethtool_phys_id_state state)
+{
+       struct hinic_dev *nic_dev = netdev_priv(netdev);
+       int err = 0;
+       u8 port;
+
+       port = nic_dev->hwdev->port_id;
+
+       switch (state) {
+       case ETHTOOL_ID_ACTIVE:
+               err = hinic_set_led_status(nic_dev->hwdev, port,
+                                          HINIC_LED_TYPE_LINK,
+                                          HINIC_LED_MODE_FORCE_2HZ);
+               if (err)
+                       netif_err(nic_dev, drv, netdev,
+                                 "Set LED blinking in 2HZ failed\n");
+               break;
+
+       case ETHTOOL_ID_INACTIVE:
+               err = hinic_reset_led_status(nic_dev->hwdev, port);
+               if (err)
+                       netif_err(nic_dev, drv, netdev,
+                                 "Reset LED to original status failed\n");
+               break;
+
+       default:
+               return -EOPNOTSUPP;
+       }
+
+       return err;
+}
+
 static const struct ethtool_ops hinic_ethtool_ops = {
        .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
                                     ETHTOOL_COALESCE_RX_MAX_FRAMES |
@@ -1714,6 +1747,7 @@ static const struct ethtool_ops hinic_ethtool_ops = {
        .get_ethtool_stats = hinic_get_ethtool_stats,
        .get_strings = hinic_get_strings,
        .self_test = hinic_diag_test,
+       .set_phys_id = hinic_set_phys_id,
 };
 
 static const struct ethtool_ops hinicvf_ethtool_ops = {
index 4de50e4..45c1378 100644 (file)
@@ -83,6 +83,8 @@ static int parse_capability(struct hinic_hwdev *hwdev,
                nic_cap->max_vf_qps = dev_cap->max_vf_sqs + 1;
        }
 
+       hwdev->port_id = dev_cap->port_id;
+
        return 0;
 }
 
index c92c39a..01fe94f 100644 (file)
@@ -312,6 +312,7 @@ struct hinic_hwdev {
        struct hinic_mbox_func_to_func  *func_to_func;
 
        struct hinic_cap                nic_cap;
+       u8                              port_id;
 };
 
 struct hinic_nic_cb {
index a3349ae..919d2c6 100644 (file)
@@ -81,7 +81,9 @@ enum hinic_comm_cmd {
        HINIC_COMM_CMD_MSI_CTRL_REG_WR_BY_UP,
        HINIC_COMM_CMD_MSI_CTRL_REG_RD_BY_UP,
 
-       HINIC_COMM_CMD_L2NIC_RESET              = 0x4b,
+       HINIC_COMM_CMD_SET_LED_STATUS   = 0x4a,
+
+       HINIC_COMM_CMD_L2NIC_RESET      = 0x4b,
 
        HINIC_COMM_CMD_PAGESIZE_SET     = 0x50,
 
index 98ea3f7..116ca1c 100644 (file)
@@ -1268,3 +1268,58 @@ int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable)
 
        return 0;
 }
+
+static int _set_led_status(struct hinic_hwdev *hwdev, u8 port,
+                          enum hinic_led_type type,
+                          enum hinic_led_mode mode, u8 reset)
+{
+       struct hinic_led_info led_info = {0};
+       u16 out_size = sizeof(led_info);
+       struct hinic_pfhwdev *pfhwdev;
+       int err;
+
+       pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
+
+       led_info.port = port;
+       led_info.reset = reset;
+
+       led_info.type = type;
+       led_info.mode = mode;
+
+       err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
+                               HINIC_COMM_CMD_SET_LED_STATUS,
+                               &led_info, sizeof(led_info),
+                               &led_info, &out_size, HINIC_MGMT_MSG_SYNC);
+       if (err || led_info.status || !out_size) {
+               dev_err(&hwdev->hwif->pdev->dev, "Failed to set led status, err: %d, status: 0x%x, out size: 0x%x\n",
+                       err, led_info.status, out_size);
+               return -EIO;
+       }
+
+       return 0;
+}
+
+int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
+                        enum hinic_led_type type, enum hinic_led_mode mode)
+{
+       if (!hwdev)
+               return -EINVAL;
+
+       return _set_led_status(hwdev, port, type, mode, 0);
+}
+
+int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port)
+{
+       int err;
+
+       if (!hwdev)
+               return -EINVAL;
+
+       err = _set_led_status(hwdev, port, HINIC_LED_TYPE_INVALID,
+                             HINIC_LED_MODE_INVALID, 1);
+       if (err)
+               dev_err(&hwdev->hwif->pdev->dev,
+                       "Failed to reset led status\n");
+
+       return err;
+}
index b21956d..5c91687 100644 (file)
@@ -666,6 +666,17 @@ struct hinic_port_loopback {
        u32     en;
 };
 
+struct hinic_led_info {
+       u8      status;
+       u8      version;
+       u8      rsvd0[6];
+
+       u8      port;
+       u8      type;
+       u8      mode;
+       u8      reset;
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
                       u16 vlan_id);
 
@@ -765,6 +776,30 @@ int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap);
 
 int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable);
 
+enum hinic_led_mode {
+       HINIC_LED_MODE_ON,
+       HINIC_LED_MODE_OFF,
+       HINIC_LED_MODE_FORCE_1HZ,
+       HINIC_LED_MODE_FORCE_2HZ,
+       HINIC_LED_MODE_FORCE_4HZ,
+       HINIC_LED_MODE_1HZ,
+       HINIC_LED_MODE_2HZ,
+       HINIC_LED_MODE_4HZ,
+       HINIC_LED_MODE_INVALID,
+};
+
+enum hinic_led_type {
+       HINIC_LED_TYPE_LINK,
+       HINIC_LED_TYPE_LOW_SPEED,
+       HINIC_LED_TYPE_HIGH_SPEED,
+       HINIC_LED_TYPE_INVALID,
+};
+
+int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port);
+
+int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
+                        enum hinic_led_type type, enum hinic_led_mode mode);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
index efab2dd..f5c7c1f 100644 (file)
@@ -383,7 +383,7 @@ static int hinic_del_vf_mac_msg_handler(void *hwdev, u16 vf_id,
 
        nic_io = &hw_dev->func_to_io;
        vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
-       if (vf_info->pf_set_mac  && is_valid_ether_addr(mac_in->mac) &&
+       if (vf_info->pf_set_mac && is_valid_ether_addr(mac_in->mac) &&
            !memcmp(vf_info->vf_mac_addr, mac_in->mac, ETH_ALEN)) {
                dev_warn(&hw_dev->hwif->pdev->dev, "PF has already set VF mac.\n");
                mac_out->status = HINIC_PF_SET_VF_ALREADY;
@@ -905,7 +905,6 @@ int hinic_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
 
        err = hinic_set_vf_spoofchk(sriov_info->hwdev,
                                    OS_VF_ID_TO_HW(vf), setting);
-
        if (!err) {
                netif_info(nic_dev, drv, netdev, "Set VF %d spoofchk %s successfully\n",
                           vf, setting ? "on" : "off");
@@ -1020,6 +1019,7 @@ static int cfg_mbx_pf_proc_vf_msg(void *hwdev, u16 vf_id, u8 cmd, void *buf_in,
        dev_cap->max_vf = cap->max_vf;
        dev_cap->max_sqs = cap->max_vf_qps;
        dev_cap->max_rqs = cap->max_vf_qps;
+       dev_cap->port_id = dev->port_id;
 
        *out_size = sizeof(*dev_cap);