If userspace requested control port frames to go over 80211, then do so.
The control packets are intercepted just prior to delivery of the packet
to the underlying network device.
Pre-authentication type frames (protocol: 0x88c7) are also forwarded
over nl80211.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
*/
sdata->control_port_protocol = params->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
+ sdata->control_port_over_nl80211 =
+ params->crypto.control_port_over_nl80211;
sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local,
¶ms->crypto,
sdata->vif.type);
params->crypto.control_port_ethertype;
vlan->control_port_no_encrypt =
params->crypto.control_port_no_encrypt;
+ vlan->control_port_over_nl80211 =
+ params->crypto.control_port_over_nl80211;
vlan->encrypt_headroom =
ieee80211_cs_headroom(sdata->local,
¶ms->crypto,
if (err)
return err;
+ sdata->control_port_over_nl80211 = setup->control_port_over_nl80211;
+
/* can mesh use other SMPS modes? */
sdata->smps_mode = IEEE80211_SMPS_OFF;
sdata->needed_rx_chains = sdata->local->rx_chains;
sdata->smps_mode = IEEE80211_SMPS_OFF;
sdata->needed_rx_chains = local->rx_chains;
+ sdata->control_port_over_nl80211 = params->control_port_over_nl80211;
ieee80211_queue_work(&local->hw, &sdata->work);
u16 sequence_number;
__be16 control_port_protocol;
bool control_port_no_encrypt;
+ bool control_port_over_nl80211;
int encrypt_headroom;
atomic_t num_tx_queued;
master->control_port_protocol;
sdata->control_port_no_encrypt =
master->control_port_no_encrypt;
+ sdata->control_port_over_nl80211 =
+ master->control_port_over_nl80211;
sdata->vif.cab_queue = master->vif.cab_queue;
memcpy(sdata->vif.hw_queue, master->vif.hw_queue,
sizeof(sdata->vif.hw_queue));
NL80211_FEATURE_USERSPACE_MPM |
NL80211_FEATURE_FULL_AP_CLIENT_STATE;
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
if (!ops->hw_scan)
wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
sdata->control_port_protocol = req->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
+ sdata->control_port_over_nl80211 =
+ req->crypto.control_port_over_nl80211;
sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
sdata->vif.type);
return true;
}
+static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb,
+ struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_sub_if_data *sdata = rx->sdata;
+ struct net_device *dev = sdata->dev;
+
+ if (unlikely((skb->protocol == sdata->control_port_protocol ||
+ skb->protocol == cpu_to_be16(ETH_P_PREAUTH)) &&
+ sdata->control_port_over_nl80211)) {
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+ bool noencrypt = status->flag & RX_FLAG_DECRYPTED;
+ struct ethhdr *ehdr = eth_hdr(skb);
+
+ cfg80211_rx_control_port(dev, skb->data, skb->len,
+ ehdr->h_source,
+ be16_to_cpu(skb->protocol), noencrypt);
+ dev_kfree_skb(skb);
+ } else {
+ /* deliver to local stack */
+ if (rx->napi)
+ napi_gro_receive(rx->napi, skb);
+ else
+ netif_receive_skb(skb);
+ }
+}
+
/*
* requires that rx->skb is a frame with ethernet header
*/
#endif
if (skb) {
- /* deliver to local stack */
skb->protocol = eth_type_trans(skb, dev);
memset(skb->cb, 0, sizeof(skb->cb));
- if (rx->napi)
- napi_gro_receive(rx->napi, skb);
- else
- netif_receive_skb(skb);
+
+ ieee80211_deliver_skb_to_local_stack(skb, rx);
}
if (xmit_skb) {