mmc: mmci: add clock divider for stm32 sdmmc

The STM32 sdmmc variant has a different clock divider.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index d636a0e..ad2f62f 100644 (file)
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1862,6 +1862,8 @@ static int mmci_probe(struct amba_device *dev,
         */
        if (variant->st_clkdiv)
                mmc->f_min = DIV_ROUND_UP(host->mclk, 257);
+       else if (variant->stm32_clkdiv)
+               mmc->f_min = DIV_ROUND_UP(host->mclk, 2046);
        else if (variant->explicit_mclk_control)
                mmc->f_min = clk_round_rate(host->clk, 100000);
        else

diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 8ecb1ee..a962cfa 100644 (file)
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -216,6 +216,7 @@ struct mmci_host;
  * @data_cmd_enable: enable value for data commands.
  * @st_sdio: enable ST specific SDIO logic
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm
  * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
  * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
  * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
@@ -269,6 +270,7 @@ struct variant_data {
        u8                      datacnt_useless:1;
        u8                      st_sdio:1;
        u8                      st_clkdiv:1;
+       u8                      stm32_clkdiv:1;
        u8                      blksz_datactrl16:1;
        u8                      blksz_datactrl4:1;
        u32                     pwrreg_powerup;