[TG3]: Fix probe failure due to invalid MAC address

Some older bootcode in some devices may report 0 MAC address in
SRAM when booting up from low power state. This patch fixes the
problem by checking for a valid MAC address in SRAM and falling back
to NVRAM if necessary.

Thanks to walt <wa1ter@myrealbox.com> for reporting the problem
and helping to debug it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b547332..c41dbb0 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10531,6 +10531,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 {
        struct net_device *dev = tp->dev;
        u32 hi, lo, mac_offset;
+       int addr_ok = 0;
 
 #ifdef CONFIG_SPARC64
        if (!tg3_get_macaddr_sparc(tp))
@@ -10560,29 +10561,34 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
                dev->dev_addr[3] = (lo >> 16) & 0xff;
                dev->dev_addr[4] = (lo >>  8) & 0xff;
                dev->dev_addr[5] = (lo >>  0) & 0xff;
-       }
-       /* Next, try NVRAM. */
-       else if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
-                !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
-                !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
-               dev->dev_addr[0] = ((hi >> 16) & 0xff);
-               dev->dev_addr[1] = ((hi >> 24) & 0xff);
-               dev->dev_addr[2] = ((lo >>  0) & 0xff);
-               dev->dev_addr[3] = ((lo >>  8) & 0xff);
-               dev->dev_addr[4] = ((lo >> 16) & 0xff);
-               dev->dev_addr[5] = ((lo >> 24) & 0xff);
-       }
-       /* Finally just fetch it out of the MAC control regs. */
-       else {
-               hi = tr32(MAC_ADDR_0_HIGH);
-               lo = tr32(MAC_ADDR_0_LOW);
 
-               dev->dev_addr[5] = lo & 0xff;
-               dev->dev_addr[4] = (lo >> 8) & 0xff;
-               dev->dev_addr[3] = (lo >> 16) & 0xff;
-               dev->dev_addr[2] = (lo >> 24) & 0xff;
-               dev->dev_addr[1] = hi & 0xff;
-               dev->dev_addr[0] = (hi >> 8) & 0xff;
+               /* Some old bootcode may report a 0 MAC address in SRAM */
+               addr_ok = is_valid_ether_addr(&dev->dev_addr[0]);
+       }
+       if (!addr_ok) {
+               /* Next, try NVRAM. */
+               if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
+                   !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
+                   !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
+                       dev->dev_addr[0] = ((hi >> 16) & 0xff);
+                       dev->dev_addr[1] = ((hi >> 24) & 0xff);
+                       dev->dev_addr[2] = ((lo >>  0) & 0xff);
+                       dev->dev_addr[3] = ((lo >>  8) & 0xff);
+                       dev->dev_addr[4] = ((lo >> 16) & 0xff);
+                       dev->dev_addr[5] = ((lo >> 24) & 0xff);
+               }
+               /* Finally just fetch it out of the MAC control regs. */
+               else {
+                       hi = tr32(MAC_ADDR_0_HIGH);
+                       lo = tr32(MAC_ADDR_0_LOW);
+
+                       dev->dev_addr[5] = lo & 0xff;
+                       dev->dev_addr[4] = (lo >> 8) & 0xff;
+                       dev->dev_addr[3] = (lo >> 16) & 0xff;
+                       dev->dev_addr[2] = (lo >> 24) & 0xff;
+                       dev->dev_addr[1] = hi & 0xff;
+                       dev->dev_addr[0] = (hi >> 8) & 0xff;
+               }
        }
 
        if (!is_valid_ether_addr(&dev->dev_addr[0])) {