Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
78 files changed:
.core_chipsel = 1,
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.core_chipsel = 1,
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.core_chipsel = 1,
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.core_chipsel = 1,
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_HW_ECC_ENGINE,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.core_chipsel = 0,
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.core_chipsel = 0,
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.options = 0,
};
.ecc_bits = 1,
.options = 0,
};
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
.core_chipsel = 0,
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.core_chipsel = 0,
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* devices we initialise */
};
/* devices we initialise */
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
.sets = at2440evb_nand_sets,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
.sets = at2440evb_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000AEP 10/100 ethernet controller */
};
/* DM9000AEP 10/100 ethernet controller */
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
.twrph1 = 40,
.sets = jive_nand_sets,
.nr_sets = ARRAY_SIZE(jive_nand_sets),
.twrph1 = 40,
.sets = jive_nand_sets,
.nr_sets = ARRAY_SIZE(jive_nand_sets),
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static int __init jive_mtdset(char *options)
};
static int __init jive_mtdset(char *options)
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
};
/* DM9000AEP 10/100 ethernet controller */
};
/* DM9000AEP 10/100 ethernet controller */
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* PCMCIA control and configuration */
};
/* PCMCIA control and configuration */
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(qt2410_nand_sets),
.sets = qt2410_nand_sets,
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(qt2410_nand_sets),
.sets = qt2410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
.sets = rx1950_nand_sets,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
.sets = rx1950_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *rx3715_devices[] __initdata = {
};
static struct platform_device *rx3715_devices[] __initdata = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(vstms_nand_sets),
.sets = vstms_nand_sets,
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(vstms_nand_sets),
.sets = vstms_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *vstms_devices[] __initdata = {
};
static struct platform_device *vstms_devices[] __initdata = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct gpio_led hmt_leds[] = {
};
static struct gpio_led hmt_leds[] = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
};
static struct platform_device *real6410_devices[] __initdata = {
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = anfc_init_hw_ecc_controller(nfc, chip);
break;
default:
dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
ret = anfc_init_hw_ecc_controller(nfc, chip);
break;
default:
dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
+ chip->ecc.engine_type);
nc = to_nand_controller(chip->controller);
nc = to_nand_controller(chip->controller);
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
* Nothing to do, the core will initialize everything for us.
*/
break;
/*
* Nothing to do, the core will initialize everything for us.
*/
break;
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = atmel_nand_pmecc_init(chip);
if (ret)
return ret;
ret = atmel_nand_pmecc_init(chip);
if (ret)
return ret;
default:
/* Other modes are not supported. */
dev_err(nc->dev, "Unsupported ECC mode: %d\n",
default:
/* Other modes are not supported. */
dev_err(nc->dev, "Unsupported ECC mode: %d\n",
+ chip->ecc.engine_type);
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Adjust the ECC operations for the HSMC IP. */
return 0;
/* Adjust the ECC operations for the HSMC IP. */
/* Default to HW ECC if pmecc is available. */
if (nc->pmecc)
/* Default to HW ECC if pmecc is available. */
if (nc->pmecc)
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
}
static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
nand_chip->legacy.chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
nand_chip->legacy.chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
- b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+ /* TODO: implement ECC */
+ b47n->nand_chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_NONE;
/* Enable NAND flash access */
bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
/* Enable NAND flash access */
bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
- if (chip->ecc.mode != NAND_ECC_HW) {
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
+ chip->ecc.engine_type);
- if (chip->ecc.mode != NAND_ECC_NONE &&
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
/* use detected ECC parameters */
(!chip->ecc.size || !chip->ecc.strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
/* use detected ECC parameters */
chip->legacy.read_buf = brcmnand_read_buf;
chip->legacy.write_buf = brcmnand_write_buf;
chip->legacy.read_buf = brcmnand_read_buf;
chip->legacy.write_buf = brcmnand_write_buf;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.read_page = brcmnand_read_page;
chip->ecc.write_page = brcmnand_write_page;
chip->ecc.read_page_raw = brcmnand_read_page_raw;
chip->ecc.read_page = brcmnand_read_page;
chip->ecc.write_page = brcmnand_write_page;
chip->ecc.read_page_raw = brcmnand_read_page_raw;
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->options |= NAND_NO_SUBPAGE_WRITE;
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ret = nand_scan(chip, cdns_chip->nsels);
if (ret) {
ret = nand_scan(chip, cdns_chip->nsels);
if (ret) {
- cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
- pdata->ecc_mode = NAND_ECC_NONE;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
if (!strncmp("soft", mode, 4))
if (!strncmp("soft", mode, 4))
- pdata->ecc_mode = NAND_ECC_SOFT;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (!strncmp("hw", mode, 2))
if (!strncmp("hw", mode, 2))
- pdata->ecc_mode = NAND_ECC_HW;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
if (IS_ERR(pdata))
return PTR_ERR(pdata);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- switch (info->chip.ecc.mode) {
- case NAND_ECC_NONE:
+ switch (info->chip.ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
pdata->ecc_bits = 0;
break;
pdata->ecc_bits = 0;
break;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ->ecc_algo field to
- * davinci_nand_pdata.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
+ * field to davinci_nand_pdata.
*/
info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
*/
info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Use board-specific ECC config */
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Use board-specific ECC config */
- info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.engine_type = pdata->engine_type;
info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
+ case NAND_ECC_ENGINE_TYPE_NONE:
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
+ case NAND_ECC_ENGINE_TYPE_SOFT:
- /* should we also implement NAND_ECC_HW to do as the code above? */
+ /* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
default:
return -EINVAL;
}
default:
return -EINVAL;
}
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ifc_nand_ctrl->index += column;
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ifc_nand_ctrl->index += column;
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
ifc_nand_ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
ifc_nand_ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
- dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
- chip->ecc.mode);
+ dev_dbg(priv->dev, "%s: nand->ecc.engine_type = %d\n", __func__,
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
chip->ecc.steps);
dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
chip->ecc.steps);
dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
chip->ecc.strength = 8;
}
} else {
chip->ecc.strength = 8;
}
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
int ret;
struct device_node *flash_np;
int ret;
struct device_node *flash_np;
- fun->chip.ecc.mode = NAND_ECC_SOFT;
+ fun->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
fun->chip.controller = &fun->base;
mtd->dev.parent = fun->dev;
fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
fun->chip.controller = &fun->base;
mtd->dev.parent = fun->dev;
- switch (nand->ecc.mode) {
- case NAND_ECC_HW:
+ switch (nand->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
break;
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
break;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
}
if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
}
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode == NAND_ECC_HW) {
+ if (nand->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
switch (mtd->oobsize) {
case 16:
case 64:
switch (mtd->oobsize) {
case 16:
case 64:
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->badblockbits = 7;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->badblockbits = 7;
gpiomtd->base.ops = &gpio_nand_ops;
nand_set_flash_node(chip, pdev->dev.of_node);
gpiomtd->base.ops = &gpio_nand_ops;
nand_set_flash_node(chip, pdev->dev.of_node);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->controller = &gpiomtd->base;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->controller = &gpiomtd->base;
ecc->write_page_raw = gpmi_ecc_write_page_raw;
ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
ecc->write_page_raw = gpmi_ecc_write_page_raw;
ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
- if (chip->ecc.mode == NAND_ECC_NONE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
}
hinfc_write(host, flag, HINFC504_CON);
}
hinfc_write(host, flag, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hisi_nfc_ecc_probe(host);
return 0;
hisi_nfc_ecc_probe(host);
return 0;
(chip->ecc.strength / 8);
}
(chip->ecc.strength / 8);
}
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
+ chip->ecc.engine_type);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
if (!host->dummy_buf)
return -ENOMEM;
if (!host->dummy_buf)
return -ENOMEM;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
- if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
+ if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+ (!ecc->size || !ecc->strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
ecc->size = chip->base.eccreq.step_size;
ecc->strength = chip->base.eccreq.strength;
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
ecc->size = chip->base.eccreq.step_size;
ecc->strength = chip->base.eccreq.strength;
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
if (ret)
return ret;
break;
ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/*
* Subpage write not available with hardware ECC, prohibit also
* subpage read as in userspace subpage access would still be
/*
* Subpage write not available with hardware ECC, prohibit also
* subpage read as in userspace subpage access would still be
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/*
* Save a reference value for timing registers before
/*
* Save a reference value for timing registers before
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_page_raw = meson_nfc_write_page_raw;
nand->ecc.write_page = meson_nfc_write_page_hwecc;
nand->ecc.write_oob_raw = nand_write_oob_std;
nand->ecc.write_page_raw = meson_nfc_write_page_raw;
nand->ecc.write_page = meson_nfc_write_page_hwecc;
nand->ecc.write_oob_raw = nand_write_oob_std;
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
int free, ret;
/* support only ecc hw mode */
int free, ret;
/* support only ecc hw mode */
- if (nand->ecc.mode != NAND_ECC_HW) {
- dev_err(dev, "ecc.mode not supported\n");
+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(dev, "ecc.engine_type not supported\n");
nand->options |= NAND_USES_DMA | NAND_SUBPAGE_READ;
/* set default mode in case dt entry is missing */
nand->options |= NAND_USES_DMA | NAND_SUBPAGE_READ;
/* set default mode in case dt entry is missing */
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint16_t config1;
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint16_t config1;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config1 = readw(NFC_V1_V2_CONFIG1);
return;
config1 = readw(NFC_V1_V2_CONFIG1);
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint32_t config2;
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint32_t config2;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config2 = readl(NFC_V3_CONFIG2);
return;
config2 = readl(NFC_V3_CONFIG2);
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
uint16_t config1 = 0;
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
uint16_t config1 = 0;
- if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ mtd->writesize)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
if (!host->devtype_data->irqpending_quirk)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
if (!host->devtype_data->irqpending_quirk)
if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
- if (nand_chip->ecc.mode == NAND_ECC_HW)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
host->eccsize = get_eccsize(mtd);
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
host->eccsize = get_eccsize(mtd);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config2 |= NFC_V3_CONFIG2_ECC_EN;
config2 |= NFC_V3_CONFIG2_PPB(
config2 |= NFC_V3_CONFIG2_ECC_EN;
config2 |= NFC_V3_CONFIG2_PPB(
struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent;
struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent;
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.read_page = mxc_nand_read_page;
chip->ecc.read_page_raw = mxc_nand_read_page_raw;
chip->ecc.read_oob = mxc_nand_read_oob;
chip->ecc.read_page = mxc_nand_read_page;
chip->ecc.read_page_raw = mxc_nand_read_page_raw;
chip->ecc.read_oob = mxc_nand_read_oob;
chip->ecc.write_oob = mxc_nand_write_oob;
break;
chip->ecc.write_oob = mxc_nand_write_oob;
break;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
*/
host->used_oobsize = min(mtd->oobsize, 218U);
*/
host->used_oobsize = min(mtd->oobsize, 218U);
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
if (is_imx21_nfc(host) || is_imx27_nfc(host))
chip->ecc.strength = 1;
else
if (is_imx21_nfc(host) || is_imx27_nfc(host))
chip->ecc.strength = 1;
else
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
[NAND_ECC_ON_DIE] = "on-die",
};
[NAND_ECC_ON_DIE] = "on-die",
};
-static int of_get_nand_ecc_mode(struct device_node *np)
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
+ enum nand_ecc_mode eng_type;
err = of_property_read_string(np, "nand-ecc-mode", &pm);
err = of_property_read_string(np, "nand-ecc-mode", &pm);
- if (err < 0)
- return err;
-
- for (i = NAND_ECC_NONE; i < ARRAY_SIZE(nand_ecc_modes); i++)
- if (!strcasecmp(pm, nand_ecc_modes[i]))
- return i;
+ if (err)
+ return NAND_ECC_ENGINE_TYPE_INVALID;
+
+ for (eng_type = NAND_ECC_NONE;
+ eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ switch (eng_type) {
+ case NAND_ECC_NONE:
+ return NAND_ECC_ENGINE_TYPE_NONE;
+ case NAND_ECC_SOFT:
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ case NAND_ECC_ON_DIE:
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ default:
+ break;
+ }
+ }
+ }
/*
* For backward compatibility we support few obsoleted values that don't
/*
* For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_mode enum anymore (they were
- * merged with other enums).
+ * have their mappings into the nand_ecc_engine_providers enum anymore
+ * (they were merged with other enums).
*/
if (!strcasecmp(pm, "soft_bch"))
*/
if (!strcasecmp(pm, "soft_bch"))
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+ return NAND_ECC_ENGINE_TYPE_INVALID;
}
static const char * const nand_ecc_algos[] = {
}
static const char * const nand_ecc_algos[] = {
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
+ enum nand_ecc_engine_type ecc_type;
enum nand_ecc_algo ecc_algo;
enum nand_ecc_algo ecc_algo;
- int ecc_mode, ecc_strength, ecc_step;
+ int ecc_strength, ecc_step;
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_type = of_get_nand_ecc_engine_type(dn);
ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
- if (ecc_mode >= 0)
- chip->ecc.mode = ecc_mode;
+ if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = ecc_type;
if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+ if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
return -EINVAL;
switch (ecc->algo) {
return -EINVAL;
switch (ecc->algo) {
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
+ !(ecc->engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
switch (mtd->oobsize) {
case 8:
case 16:
* page with ECC layout when ->oobsize <= 128 for
* compatibility reasons.
*/
* page with ECC layout when ->oobsize <= 128 for
* compatibility reasons.
*/
- if (ecc->mode == NAND_ECC_NONE) {
+ if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
&nand_ooblayout_lp_ops);
break;
mtd_set_ooblayout(mtd,
&nand_ooblayout_lp_ops);
break;
* selected and we have 256 byte pagesize fallback to software ECC
*/
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+
switch (ecc->placement) {
case NAND_ECC_PLACEMENT_UNKNOWN:
case NAND_ECC_PLACEMENT_OOB:
switch (ecc->placement) {
case NAND_ECC_PLACEMENT_UNKNOWN:
case NAND_ECC_PLACEMENT_OOB:
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
ret = -EINVAL;
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
ret = -EINVAL;
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
ecc->write_oob = nand_write_oob_std;
break;
ecc->write_oob = nand_write_oob_std;
break;
- case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
- WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->engine_type);
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- switch (ecc->mode) {
- case NAND_ECC_SOFT:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
*/
void nand_cleanup(struct nand_chip *chip)
{
*/
void nand_cleanup(struct nand_chip *chip)
{
- if (chip->ecc.mode == NAND_ECC_SOFT &&
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
ondie = micron_supports_on_die_ecc(chip);
if (ondie == MICRON_ON_DIE_MANDATORY &&
ondie = micron_supports_on_die_ecc(chip);
if (ondie == MICRON_ON_DIE_MANDATORY &&
- chip->ecc.mode != NAND_ECC_ON_DIE) {
+ chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_DIE) {
pr_err("On-die ECC forcefully enabled, not supported\n");
ret = -EINVAL;
goto err_free_manuf_data;
}
pr_err("On-die ECC forcefully enabled, not supported\n");
ret = -EINVAL;
goto err_free_manuf_data;
}
- if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE) {
if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
pr_err("On-die ECC selected but not supported\n");
ret = -EINVAL;
if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
pr_err("On-die ECC selected but not supported\n");
ret = -EINVAL;
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
- if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
+ if (nand_is_slc(chip) &&
+ chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
toshiba_nand_benand_init(chip);
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
toshiba_nand_benand_init(chip);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
nsmtd = nand_to_mtd(chip);
nand_set_controller_data(chip, (void *)ns);
nsmtd = nand_to_mtd(chip);
nand_set_controller_data(chip, (void *)ns);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
int stat = 0;
/* Ex NAND_ECC_HW12_2048 */
int stat = 0;
/* Ex NAND_ECC_HW12_2048 */
- if ((info->nand.ecc.mode == NAND_ECC_HW) &&
- (info->nand.ecc.size == 2048))
+ if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ info->nand.ecc.size == 2048)
blockCnt = 4;
else
blockCnt = 1;
blockCnt = 4;
else
blockCnt = 1;
- * Bail out earlier to let NAND_ECC_SOFT code create its own
+ * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
* ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
* ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.strength = 1;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.strength = 1;
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
chip->ecc.size = 512;
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
case OMAP_ECC_BCH4_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
case OMAP_ECC_BCH4_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 7 + 1;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 7 + 1;
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
chip->ecc.size = 512;
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
case OMAP_ECC_BCH8_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
case OMAP_ECC_BCH8_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 13 + 1;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 13 + 1;
case OMAP_ECC_BCH16_CODE_HW:
pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
case OMAP_ECC_BCH16_CODE_HW:
pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 26;
chip->ecc.strength = 16;
chip->ecc.size = 512;
chip->ecc.bytes = 26;
chip->ecc.strength = 16;
nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
- nc->ecc.mode = NAND_ECC_SOFT;
+ nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
chip->legacy.write_buf = r852_write_buf;
/* ecc */
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
nmtd->info = info;
nmtd->set = set;
nmtd->info = info;
nmtd->set = set;
- chip->ecc.mode = info->platform->ecc_mode;
+ chip->ecc.engine_type = info->platform->engine_type;
/*
* If you use u-boot BBT creation code, specifying this flag will
/*
* If you use u-boot BBT creation code, specifying this flag will
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(info->device, "ECC disabled\n");
break;
dev_info(info->device, "ECC disabled\n");
break;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ecc_algo field to
- * s3c2410_platform_nand.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ecc_algo field
+ * to s3c2410_platform_nand.
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.strength = 1;
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.strength = 1;
chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN;
} else {
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN;
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
/* 15 us command delay time */
this->legacy.chip_delay = 15;
/* set eccmode using hardware ECC */
/* 15 us command delay time */
this->legacy.chip_delay = 15;
/* set eccmode using hardware ECC */
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.strength = 1;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.strength = 1;
nand_chip->legacy.read_buf = socrates_nand_read_buf;
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
nand_chip->legacy.read_buf = socrates_nand_read_buf;
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ /* enable ECC */
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
- * Only NAND_ECC_HW mode is actually supported
+ * Only NAND_ECC_ENGINE_TYPE_ON_HOST mode is actually supported
* Hamming => ecc.strength = 1
* BCH4 => ecc.strength = 4
* BCH8 => ecc.strength = 8
* ECC sector size = 512
*/
* Hamming => ecc.strength = 1
* BCH4 => ecc.strength = 4
* BCH8 => ecc.strength = 8
* ECC sector size = 512
*/
- if (chip->ecc.mode != NAND_ECC_HW) {
- dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(nfc->dev,
+ "nand_ecc_engine_type is not well defined in the DT\n");
NAND_USES_DMA;
/* Default ECC settings */
NAND_USES_DMA;
/* Default ECC settings */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
* only have 2 bytes available in the first user data
* section.
*/
* only have 2 bytes available in the first user data
* section.
*/
- if (!section && ecc->mode == NAND_ECC_HW) {
+ if (!section && ecc->engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
oobregion->offset = 2;
oobregion->length = 2;
oobregion->offset = 2;
oobregion->length = 2;
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
break;
sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
break;
+ case NAND_ECC_ENGINE_TYPE_NONE:
if (!ecc->size || !ecc->strength)
return -EINVAL;
if (!ecc->size || !ecc->strength)
return -EINVAL;
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
if (ret)
return ret;
break;
ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
return -EINVAL;
break;
default:
return -EINVAL;
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
*/
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_set_flash_node(nand, np);
mtd = nand_to_mtd(nand);
nand_set_flash_node(nand, np);
mtd = nand_to_mtd(nand);
{
struct nand_ecc_ctrl *ecc = &chip->ecc;
{
struct nand_ecc_ctrl *ecc = &chip->ecc;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->base.eccreq.step_size != 512) {
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->base.eccreq.step_size != 512) {
nand_chip->legacy.read_buf = tmio_nand_read_buf;
/* set eccmode using hardware ECC */
nand_chip->legacy.read_buf = tmio_nand_read_buf;
/* set eccmode using hardware ECC */
- nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
nand_chip->ecc.strength = 2;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
nand_chip->ecc.strength = 2;
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.strength = 1;
chip->legacy.chip_delay = 100;
chip->controller = &drvdata->controller;
chip->ecc.strength = 1;
chip->legacy.chip_delay = 100;
chip->controller = &drvdata->controller;
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
- if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+ if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
return 0;
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
data->chip.legacy.read_byte = xway_read_byte;
data->chip.legacy.chip_delay = 30;
data->chip.legacy.read_byte = xway_read_byte;
data->chip.legacy.chip_delay = 30;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
/**
* struct nand_ecc_ctrl - Control structure for ECC
/**
* struct nand_ecc_ctrl - Control structure for ECC
+ * @engine_type: ECC engine type
* @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
* @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- enum nand_ecc_mode mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
struct mtd_partition *parts;
unsigned nr_parts;
struct mtd_partition *parts;
unsigned nr_parts;
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
+ /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
+ * soft == NAND_ECC_ENGINE_TYPE_SOFT
+ * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
unsigned int ignore_unset_ecc:1;
unsigned int ignore_unset_ecc:1;
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
int nr_sets;
struct s3c2410_nand_set *sets;
int nr_sets;
struct s3c2410_nand_set *sets;