Merge tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git...

Merge tag 'qcom-arm64-for-6.9' of https://git./linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.9

Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.

On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.

For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.

GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.

UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.

PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X

On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.

On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.

VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.

USB Type-C port management is enabled on QRB4210 RB2.

On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.

On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.

On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.

For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.

A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.

RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.

On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.

On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.

On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.

On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.

SM8150 PCIe controller definitions are corrected.

As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.

As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.

* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
  arm64: dts: qcom: sm6115: fix USB PHY configuration
  arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
  arm64: dts: qcom: replace underscores in node names
  dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
  arm64: dts: qcom: pm4125: define USB-C related blocks
  arm64: dts: qcom: sa8540p-ride: disable pcie2a node
  arm64: dts: qcom: sc7280: add slimbus DT node
  arm64: dts: qcom: sc7280: Add capacity and DPC properties
  arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
  arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
  arm64: dts: qcom: sm8150: correct PCIe wake-gpios
  arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
  arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
  arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
  arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
  arm64: dts: qcom: sm6350: Add interconnect for MDSS
  arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
  arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
  arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
  arm64: dts: qcom: minor whitespace cleanup
  ...

Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>