ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware

ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware

Check whether the firmware is already patched. If so, include the
firmware version in the firmware file name.

If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.

If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.

The firmware is pre-patched if either:
 - FIRMWARE_MISSING == 0, or
 - it is a secured CS35L56 (which implies that is was already patched),

cs35l56_hw_init() will set preloaded_fw_ver to the (non-zero)
firmware version if either of these conditions is true.

Normal (unpatched or replaceable firmware):
   cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]

Preloaded firmware:
   cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]

Where:
   [-s] is an optional -s added into the name for a secured CS35L56
   VVVVVV is the 24-bit firmware version in hexadecimal.

Backport note:
This won't apply to kernel versions older than v6.6.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-18-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>