Merge tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git...

Merge tag 'iio-fixes-for-5.4a' of https://git./linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.4 cycle.

* adis16400
  - Make sure to free memory on a few failure paths.
* adxl372
  - Fix wrong fifo depth
  - Fix wrong indexing of data from the fifo.
  - Perform a reset at startup to avoid a problem with inconsistent state.
* axp288
  - This is a fix for a fix.  The original fix made sure we kept the
    configuration from some firmwares to preserve a bias current.
    Unfortunately it appears the previous behaviour was working around
    a buggy firmware by overwriting the wrong value it had.  Hence
    a regression was seen.
* bmc150
  - Fix the centre temperature.  This was due to an error in one of the
    datasheets.
* hx711
  - Fix an issue where a badly timed interrupt could lead to a control
    line being high long enough to put the device into a low power state.
* meson_sar_adc
  - Fix a case where the irq was enabled before everything it uses was
    allocated.
* st_lsm6dsx
  - Ensure we don't set the sensor sensitivity to 0 as it will force
    all readings to 0.
  - Fix a wait time for the slave i2c controller when the accelerometer
    is not enabled.
* stm32-adc
  - Precursor for fix. Move a set of register definitions to a header.
  - Fix a race when several ADCs are in use with some using interrupts
    to control the dataflow and some using DMA.
* vcnl4000
  - Fix a garbage of_match_table in which a string was passed instead
    of the intended enum.

* tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: Fix an undefied reference error in noa1305_probe
  iio: light: opt3001: fix mutex unlock race
  iio: adc: ad799x: fix probe error handling
  iio: light: add missing vcnl4040 of_compatible
  iio: light: fix vcnl4000 devicetree hooks
  iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  iio: adc: axp288: Override TS pin bias current for some models
  iio: imu: adis16400: fix memory leak
  iio: imu: adis16400: release allocated memory on failure
  iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
  iio: adc: stm32-adc: move registers definitions
  iio: accel: adxl372: Perform a reset at start up
  iio: accel: adxl372: Fix push to buffers lost samples
  iio: accel: adxl372: Fix/remove limitation for FIFO samples
  iio: adc: hx711: fix bug in sampling of data
  iio: fix center temperature of bmc150-accel-core
  iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
  iio: adc: meson_saradc: Fix memory allocation order