Merge branch 'dsa-realtek-leds'

Merge branch 'dsa-realtek-leds'

Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: fix LED support for rtl8366

This series fixes the LED support for rtl8366. The existing code was not
tested in a device with switch LEDs and it was using a flawed logic.

The driver now keeps the default LED configuration if nothing requests a
different behavior. This may be enough for most devices. This can be
achieved either by omitting the LED from the device-tree or configuring
all LEDs in a group with the default state set to "keep".

The hardware trigger for LEDs in Realtek switches is shared among all
LEDs in a group. This behavior doesn't align well with the Linux LED
API, which controls LEDs individually. Once the OS changes the
brightness of a LED in a group still triggered by the hardware, the
entire group switches to software-controlled LEDs, even for those not
metioned in the device-tree. This shared behavior also prevents
offloading the trigger to the hardware as it would require an
orchestration between LEDs in a group, not currently present in the LED
API.

The assertion of device hardware reset during driver removal was removed
because it was causing an issue with the LED release code. Devres
devices are released after the driver's removal is executed. Asserting
the reset at that point was causing timeout errors during LED release
when it attempted to turn off the LED.

To: Linus Walleij <linus.walleij@linaro.org>
To: Alvin Šipraga <alsi@bang-olufsen.dk>
To: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>
To: Vladimir Oltean <olteanv@gmail.com>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Changes in v2:
- Fixed commit message formatting
- Added GROUP to LED group enum values. With that, moved the code that
  disables LED into a new function to keep 80-collumn limit.
- Dropped unused enable argument in rb8366rb_get_port_led()
- Fixed variable order in rtl8366rb_setup_led()
- Removed redundant led group test in rb8366rb_{g,s}et_port_led()
- Initialize ret as 0 in rtl8366rb_setup_leds()
- Updated comments related to LED blinking and setup
- Link to v1: https://lore.kernel.org/r/20240310-realtek-led-v1-0-4d9813ce938e@gmail.com

Changes in v1:
- Rebased on new relatek DSA drivers
- Improved commit messages
- Added commit to remove the reset assert during .remove
- Link to RFC: https://lore.kernel.org/r/20240106184651.3665-1-luizluca@gmail.com
====================

Signed-off-by: David S. Miller <davem@davemloft.net>