X-Git-Url: http://git.monstr.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2Flpfc%2Flpfc.h;h=691acbdcc46dfc4ab941c2668d18bef60cd7347b;hb=10fd71780f7d155f4e35fecfad0ebd4a725a244b;hp=bade2e025ecf2c73b2fdf0869d2e0f8652877c0e;hpb=3e414b5bd28f965fb39b9e9419d877df0cf3111a;p=linux-2.6-microblaze.git

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index bade2e025ecf..691acbdcc46d 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -51,6 +51,8 @@ struct lpfc_sli2_slim;
 		cmnd for menlo needs nearly twice as for firmware
 		downloads using bsg */
 
+#define LPFC_DEFAULT_XPSGL_SIZE	256
+#define LPFC_MAX_SG_TABLESIZE	0xffff
 #define LPFC_MIN_SG_SLI4_BUF_SZ	0x800	/* based on LPFC_DEFAULT_SG_SEG_CNT */
 #define LPFC_MAX_BG_SLI4_SEG_CNT_DIF 128 /* sg element count for BlockGuard */
 #define LPFC_MAX_SG_SEG_CNT_DIF 512	/* sg element count per scsi cmnd  */
@@ -732,14 +734,13 @@ struct lpfc_hba {
 #define HBA_AER_ENABLED		0x1000 /* AER enabled with HBA */
 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
 #define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
-#define HBA_FCP_IOQ_FLUSH	0x8000 /* FCP I/O queues being flushed */
+#define HBA_IOQ_FLUSH		0x8000 /* FCP/NVME I/O queues being flushed */
 #define HBA_FW_DUMP_OP		0x10000 /* Skips fn reset before FW dump */
 #define HBA_RECOVERABLE_UE	0x20000 /* Firmware supports recoverable UE */
 #define HBA_FORCED_LINK_SPEED	0x40000 /*
 					 * Firmware supports Forced Link Speed
 					 * capability
 					 */
-#define HBA_NVME_IOQ_FLUSH      0x80000 /* NVME IO queues flushed. */
 #define HBA_FLOGI_ISSUED	0x100000 /* FLOGI was issued */
 
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
@@ -795,10 +796,12 @@ struct lpfc_hba {
 	uint8_t  mds_diags_support;
 	uint8_t  bbcredit_support;
 	uint8_t  enab_exp_wqcq_pages;
+	u8	 nsler; /* Firmware supports FC-NVMe-2 SLER */
 
 	/* HBA Config Parameters */
 	uint32_t cfg_ack0;
 	uint32_t cfg_xri_rebalancing;
+	uint32_t cfg_xpsgl;
 	uint32_t cfg_enable_npiv;
 	uint32_t cfg_enable_rrq;
 	uint32_t cfg_topology;
@@ -905,6 +908,7 @@ struct lpfc_hba {
 	wait_queue_head_t    work_waitq;
 	struct task_struct   *worker_thread;
 	unsigned long data_flags;
+	uint32_t border_sge_num;
 
 	uint32_t hbq_in_use;		/* HBQs in use flag */
 	uint32_t hbq_count;	        /* Count of configured HBQs */
@@ -987,6 +991,7 @@ struct lpfc_hba {
 	struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
 	struct dma_pool *lpfc_hbq_pool;	/* SLI3 hbq buffer pool */
 	struct dma_pool *txrdy_payload_pool;
+	struct dma_pool *lpfc_cmd_rsp_buf_pool;
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -1034,8 +1039,6 @@ struct lpfc_hba {
 	struct dentry *debug_hbqinfo;
 	struct dentry *debug_dumpHostSlim;
 	struct dentry *debug_dumpHBASlim;
-	struct dentry *debug_dumpData;   /* BlockGuard BPL */
-	struct dentry *debug_dumpDif;    /* BlockGuard BPL */
 	struct dentry *debug_InjErrLBA;  /* LBA to inject errors at */
 	struct dentry *debug_InjErrNPortID;  /* NPortID to inject errors at */
 	struct dentry *debug_InjErrWWPN;  /* WWPN to inject errors at */