X-Git-Url: http://git.monstr.eu/?a=blobdiff_plain;f=drivers%2Fcpufreq%2Ftegra-cpufreq.c;h=8084c7f7e206320eccb6a3bb4e52b3e8e41831fb;hb=3dc50c1af30bf79c4fca3065acfb34adf05e90c2;hp=6e774c6ac20bf3ab82fe0e0dc3bd204de04009f9;hpb=16b9057804c02e2d351e9c8f606e909b43cbd9e7;p=linux-2.6-microblaze.git diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index 6e774c6ac20b..8084c7f7e206 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -45,46 +45,54 @@ static struct clk *cpu_clk; static struct clk *pll_x_clk; static struct clk *pll_p_clk; static struct clk *emc_clk; +static bool pll_x_prepared; -static int tegra_cpu_clk_set_rate(unsigned long rate) +static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000; + + /* + * Don't switch to intermediate freq if: + * - we are already at it, i.e. policy->cur == ifreq + * - index corresponds to ifreq + */ + if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq)) + return 0; + + return ifreq; +} + +static int tegra_target_intermediate(struct cpufreq_policy *policy, + unsigned int index) { int ret; /* * Take an extra reference to the main pll so it doesn't turn - * off when we move the cpu off of it + * off when we move the cpu off of it as enabling it again while we + * switch to it from tegra_target() would take additional time. + * + * When target-freq is equal to intermediate freq we don't need to + * switch to an intermediate freq and so this routine isn't called. + * Also, we wouldn't be using pll_x anymore and must not take extra + * reference to it, as it can be disabled now to save some power. */ clk_prepare_enable(pll_x_clk); ret = clk_set_parent(cpu_clk, pll_p_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_p\n"); - goto out; - } - - if (rate == clk_get_rate(pll_p_clk)) - goto out; - - ret = clk_set_rate(pll_x_clk, rate); - if (ret) { - pr_err("Failed to change pll_x to %lu\n", rate); - goto out; - } - - ret = clk_set_parent(cpu_clk, pll_x_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_x\n"); - goto out; - } + if (ret) + clk_disable_unprepare(pll_x_clk); + else + pll_x_prepared = true; -out: - clk_disable_unprepare(pll_x_clk); return ret; } static int tegra_target(struct cpufreq_policy *policy, unsigned int index) { unsigned long rate = freq_table[index].frequency; + unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000; int ret = 0; /* @@ -98,10 +106,30 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index) else clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ - ret = tegra_cpu_clk_set_rate(rate * 1000); + /* + * target freq == pll_p, don't need to take extra reference to pll_x_clk + * as it isn't used anymore. + */ + if (rate == ifreq) + return clk_set_parent(cpu_clk, pll_p_clk); + + ret = clk_set_rate(pll_x_clk, rate * 1000); + /* Restore to earlier frequency on error, i.e. pll_x */ if (ret) - pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n", - rate); + pr_err("Failed to change pll_x to %lu\n", rate); + + ret = clk_set_parent(cpu_clk, pll_x_clk); + /* This shouldn't fail while changing or restoring */ + WARN_ON(ret); + + /* + * Drop count to pll_x clock only if we switched to intermediate freq + * earlier while transitioning to a target frequency. + */ + if (pll_x_prepared) { + clk_disable_unprepare(pll_x_clk); + pll_x_prepared = false; + } return ret; } @@ -137,16 +165,18 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy) } static struct cpufreq_driver tegra_cpufreq_driver = { - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = tegra_target, - .get = cpufreq_generic_get, - .init = tegra_cpu_init, - .exit = tegra_cpu_exit, - .name = "tegra", - .attr = cpufreq_generic_attr, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .get_intermediate = tegra_get_intermediate, + .target_intermediate = tegra_target_intermediate, + .target_index = tegra_target, + .get = cpufreq_generic_get, + .init = tegra_cpu_init, + .exit = tegra_cpu_exit, + .name = "tegra", + .attr = cpufreq_generic_attr, #ifdef CONFIG_PM - .suspend = cpufreq_generic_suspend, + .suspend = cpufreq_generic_suspend, #endif };