X-Git-Url: http://git.monstr.eu/?a=blobdiff_plain;f=Documentation%2Fdevicetree%2Fbindings%2Fopp%2Fopp.txt;h=08b3da4736cf29afa0927ff9706cc23cab0eb5ed;hb=71c5f03154ac1cb27423b984743ccc2f5d11d14d;hp=9847dfeeffcba0bb4423c0418e4007760be00f96;hpb=e5acf0ed8a5f0af084b0fdb53b0c7aad47dab29b;p=linux-2.6-microblaze.git

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 9847dfeeffcb..08b3da4736cf 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -65,7 +65,9 @@ Required properties:
 
 - OPP nodes: One or more OPP nodes describing voltage-current-frequency
   combinations. Their name isn't significant but their phandle can be used to
-  reference an OPP.
+  reference an OPP. These are mandatory except for the case where the OPP table
+  is present only to indicate dependency between devices using the opp-shared
+  property.
 
 Optional properties:
 - opp-shared: Indicates that device nodes using this OPP Table Node's phandle
@@ -568,3 +570,53 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 		};
 	};
 };
+
+Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
+distinct clock controls but two sets of clock/voltage/current lines.
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&dvfs_controller 0>;
+			operating-points-v2 = <&cpu_opp0_table>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&dvfs_controller 1>;
+			operating-points-v2 = <&cpu_opp0_table>;
+		};
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&dvfs_controller 2>;
+			operating-points-v2 = <&cpu_opp1_table>;
+		};
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&dvfs_controller 3>;
+			operating-points-v2 = <&cpu_opp1_table>;
+		};
+
+	};
+
+	cpu_opp0_table: opp0_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+	};
+
+	cpu_opp1_table: opp1_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+	};
+};