X-Git-Url: http://git.monstr.eu/?a=blobdiff_plain;f=Documentation%2Fdevicetree%2Fbindings%2Fdisplay%2Fmediatek%2Fmediatek%2Chdmi.txt;fp=Documentation%2Fdevicetree%2Fbindings%2Fdisplay%2Fmediatek%2Fmediatek%2Chdmi.txt;h=6b1c586403e44cdc29a9da779ac162fa6e13cbba;hb=ea6e3c31548ebd9be3d2405c680cac1706e7c7b2;hp=7b124242b0c553b7c09e7412a789c831430e6b3c;hpb=9123e3a74ec7b934a4a099e98af6a61c2f80bbf5;p=linux-2.6-microblaze.git diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 7b124242b0c5..6b1c586403e4 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -6,6 +6,7 @@ its parallel input. Required properties: - compatible: Should be "mediatek,-hdmi". +- the supported chips are mt2701, mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication. Required properties: - compatible: Should be "mediatek,-cec" +- the supported chips are mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clock @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices. Required properties: - compatible: Should be "mediatek,-hdmi-ddc" +- the supported chips are mt7623 and mt8173 - reg: Physical base address and length of the controller's registers - clocks: device clock - clock-names: Should be "ddc-i2c". @@ -56,6 +59,7 @@ output and drives the HDMI pads. Required properties: - compatible: "mediatek,-hdmi-phy" +- the supported chips are mt2701, mt7623 and mt8173 - reg: Physical base address and length of the module's registers - clocks: PLL reference clock - clock-names: must contain "pll_ref"