#default opts
my %default = (
- "MAILER" => "sendmail", # default mailer
+ "MAILER" => "sendmail", # default mailer
"EMAIL_ON_ERROR" => 1,
"EMAIL_WHEN_FINISHED" => 1,
"EMAIL_WHEN_CANCELED" => 0,
"CLOSE_CONSOLE_SIGNAL" => "INT",
"TIMEOUT" => 120,
"TMP_DIR" => "/tmp/ktest/\${MACHINE}",
- "SLEEP_TIME" => 60, # sleep time between tests
+ "SLEEP_TIME" => 60, # sleep time between tests
"BUILD_NOCLEAN" => 0,
"REBOOT_ON_ERROR" => 0,
"POWEROFF_ON_ERROR" => 0,
"REBOOT_ON_SUCCESS" => 1,
"POWEROFF_ON_SUCCESS" => 0,
"BUILD_OPTIONS" => "",
- "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
- "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
+ "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
+ "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
"CLEAR_LOG" => 0,
"BISECT_MANUAL" => 0,
"BISECT_SKIP" => 1,
EOF
;
+# used with process_expression()
+my $d = 0;
+
+# defined before get_test_name()
+my $in_die = 0;
+
+# defined before process_warning_line()
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+# defined before child_finished()
+my $child_done;
+
+# config_ignore holds the configs that were set (or unset) for
+# a good config and we will ignore these configs for the rest
+# of a config bisect. These configs stay as they were.
+my %config_ignore;
+
+# config_set holds what all configs were set as.
+my %config_set;
+
+# config_off holds the set of configs that the bad config had disabled.
+# We need to record them and set them in the .config when running
+# olddefconfig, because olddefconfig keeps the defaults.
+my %config_off;
+
+# config_off_tmp holds a set of configs to turn off for now
+my @config_off_tmp;
+
+# config_list is the set of configs that are being tested
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+# found above run_config_bisect()
+my $pass = 1;
+
+# found above add_dep()
+
+my %depends;
+my %depcount;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+# found above test_this_config()
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+#
+# These are first defined here, main function later on
+#
+sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
+
sub _logit {
if (defined($opt{"LOG_FILE"})) {
print LOG @_;
my $ans;
for (;;) {
- if ($cancel) {
+ if ($cancel) {
print "$prompt [y/n/C] ";
} else {
print "$prompt [Y/n] ";
# remove the space added in the beginning
$retval =~ s/ //;
- return "$retval"
+ return "$retval";
}
sub set_value {
defined($opt{$2});
}
-my $d = 0;
sub process_expression {
my ($name, $val) = @_;
$override = 0;
if ($type eq "TEST_START") {
-
if ($num_tests_set) {
die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
}
$test_num = $old_test_num;
$repeat = $old_repeat;
}
-
} elsif (/^\s*ELSE\b(.*)$/) {
if (!$if) {
die "$name: $.: ELSE found with out matching IF section\n$_";
}
}
}
-
+
if ( ! -r $file ) {
die "$name: $.: Can't read file $file\n$_";
}
}
sub get_test_case {
- print "What test case would you like to run?\n";
- print " (build, install or boot)\n";
- print " Other tests are available but require editing ktest.conf\n";
- print " (see tools/testing/ktest/sample.conf)\n";
- my $ans = <STDIN>;
- chomp $ans;
- $default{"TEST_TYPE"} = $ans;
+ print "What test case would you like to run?\n";
+ print " (build, install or boot)\n";
+ print " Other tests are available but require editing ktest.conf\n";
+ print " (see tools/testing/ktest/sample.conf)\n";
+ my $ans = <STDIN>;
+ chomp $ans;
+ $default{"TEST_TYPE"} = $ans;
}
sub read_config {
return $option;
}
-sub run_command;
-sub start_monitor;
-sub end_monitor;
-sub wait_for_monitor;
-
sub reboot {
my ($time) = @_;
my $powercycle = 0;
($test_type eq "config_bisect" && $opt{"CONFIG_BISECT_TYPE[$i]"} eq "build");
}
-my $in_die = 0;
-
sub get_test_name() {
my $name;
}
sub dodie {
-
# avoid recursion
return if ($in_die);
$in_die = 1;
doprint "CRITICAL FAILURE... [TEST $i] ", @_, "\n";
if ($reboot_on_error && !do_not_reboot) {
-
doprint "REBOOTING\n";
reboot_to_good;
-
} elsif ($poweroff_on_error && defined($power_off)) {
doprint "POWERING OFF\n";
`$power_off`;
close O;
close L;
}
- send_email("KTEST: critical failure for test $i [$name]",
- "Your test started at $script_start_time has failed with:\n@_\n", $log_file);
+
+ send_email("KTEST: critical failure for test $i [$name]",
+ "Your test started at $script_start_time has failed with:\n@_\n", $log_file);
}
if ($monitor_cnt) {
- # restore terminal settings
- system("stty $stty_orig");
+ # restore terminal settings
+ system("stty $stty_orig");
}
if (defined($post_test)) {
}
sub save_logs {
- my ($result, $basedir) = @_;
- my @t = localtime;
- my $date = sprintf "%04d%02d%02d%02d%02d%02d",
- 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+ my ($result, $basedir) = @_;
+ my @t = localtime;
+ my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+ 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
- my $type = $build_type;
- if ($type =~ /useconfig/) {
- $type = "useconfig";
- }
+ my $type = $build_type;
+ if ($type =~ /useconfig/) {
+ $type = "useconfig";
+ }
- my $dir = "$machine-$test_type-$type-$result-$date";
+ my $dir = "$machine-$test_type-$type-$result-$date";
- $dir = "$basedir/$dir";
+ $dir = "$basedir/$dir";
- if (!-d $dir) {
- mkpath($dir) or
- dodie "can't create $dir";
- }
+ if (!-d $dir) {
+ mkpath($dir) or
+ dodie "can't create $dir";
+ }
- my %files = (
- "config" => $output_config,
- "buildlog" => $buildlog,
- "dmesg" => $dmesg,
- "testlog" => $testlog,
- );
+ my %files = (
+ "config" => $output_config,
+ "buildlog" => $buildlog,
+ "dmesg" => $dmesg,
+ "testlog" => $testlog,
+ );
- while (my ($name, $source) = each(%files)) {
- if (-f "$source") {
- cp "$source", "$dir/$name" or
- dodie "failed to copy $source";
- }
+ while (my ($name, $source) = each(%files)) {
+ if (-f "$source") {
+ cp "$source", "$dir/$name" or
+ dodie "failed to copy $source";
}
+ }
- doprint "*** Saved info to $dir ***\n";
+ doprint "*** Saved info to $dir ***\n";
}
sub fail {
- if ($die_on_failure) {
- dodie @_;
- }
+ if ($die_on_failure) {
+ dodie @_;
+ }
- doprint "FAILED\n";
+ doprint "FAILED\n";
- my $i = $iteration;
+ my $i = $iteration;
- # no need to reboot for just building.
- if (!do_not_reboot) {
- doprint "REBOOTING\n";
- reboot_to_good $sleep_time;
- }
+ # no need to reboot for just building.
+ if (!do_not_reboot) {
+ doprint "REBOOTING\n";
+ reboot_to_good $sleep_time;
+ }
- my $name = "";
+ my $name = "";
- if (defined($test_name)) {
- $name = " ($test_name)";
- }
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
- print_times;
+ print_times;
- doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
- doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
- doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
- doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
- doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
- if (defined($store_failures)) {
- save_logs "fail", $store_failures;
- }
+ if (defined($store_failures)) {
+ save_logs "fail", $store_failures;
+ }
- if (defined($post_test)) {
- run_command $post_test;
- }
+ if (defined($post_test)) {
+ run_command $post_test;
+ }
- return 1;
+ return 1;
}
sub run_command {
my ($command, $target, $skip) = @_;
return if (defined($grub_number) && defined($last_grub_menu) &&
- $last_grub_menu eq $grub_menu && defined($last_machine) &&
- $last_machine eq $machine);
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
doprint "Find $reboot_type menu ... ";
$grub_number = -1;
my $ssh_grub = $ssh_exec;
$ssh_grub =~ s,\$SSH_COMMAND,$command,g;
- open(IN, "$ssh_grub |")
- or dodie "unable to execute $command";
+ open(IN, "$ssh_grub |") or
+ dodie "unable to execute $command";
my $found = 0;
$target = '^menuentry.*' . $grub_menu_qt;
$skip = '^menuentry\s|^submenu\s';
} elsif ($reboot_type eq "grub2bls") {
- $command = $grub_bls_get;
- $target = '^title=.*' . $grub_menu_qt;
- $skip = '^title=';
+ $command = $grub_bls_get;
+ $target = '^title=.*' . $grub_menu_qt;
+ $skip = '^title=';
} else {
return;
}
_get_grub_index($command, $target, $skip);
}
-sub wait_for_input
-{
+sub wait_for_input {
my ($fp, $time) = @_;
my $start_time;
my $rin;
my $version_found = 0;
while (!$done) {
-
if ($bug && defined($stop_after_failure) &&
$stop_after_failure >= 0) {
my $time = $stop_after_failure - (time - $failure_start);
return monitor;
}
-my $check_build_re = ".*:.*(warning|error|Error):.*";
-my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
-
sub process_warning_line {
my ($line) = @_;
while (<IN>) {
if (/$check_build_re/) {
my $warning = process_warning_line $_;
-
+
$warnings_list{$warning} = 1;
}
}
run_command "mv $outputdir/config_temp $output_config" or
dodie "moving config_temp";
}
-
} elsif (!$noclean) {
unlink "$output_config";
run_command "$make mrproper" or
# Run old config regardless, to enforce min configurations
make_oldconfig;
+ if (not defined($build_options)){
+ $build_options = "";
+ }
my $build_ret = run_command "$make $build_options", $buildlog;
if (defined($post_build)) {
print_times;
- doprint "\n\n*******************************************\n";
- doprint "*******************************************\n";
- doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
- doprint "*******************************************\n";
- doprint "*******************************************\n";
+ doprint "\n\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
+ doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
if (defined($store_successes)) {
- save_logs "success", $store_successes;
+ save_logs "success", $store_successes;
}
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
exit $run_command_status;
}
-my $child_done;
-
sub child_finished {
$child_done = 1;
}
}
if ($do_check) {
-
# get current HEAD
my $head = get_sha1("HEAD");
run_command "git bisect replay $replay" or
dodie "failed to run replay";
} else {
-
run_command "git bisect good $good" or
dodie "could not set bisect good to $good";
run_git_bisect "git bisect bad $bad" or
dodie "could not set bisect bad to $bad";
-
}
if (defined($start)) {
success $i;
}
-# config_ignore holds the configs that were set (or unset) for
-# a good config and we will ignore these configs for the rest
-# of a config bisect. These configs stay as they were.
-my %config_ignore;
-
-# config_set holds what all configs were set as.
-my %config_set;
-
-# config_off holds the set of configs that the bad config had disabled.
-# We need to record them and set them in the .config when running
-# olddefconfig, because olddefconfig keeps the defaults.
-my %config_off;
-
-# config_off_tmp holds a set of configs to turn off for now
-my @config_off_tmp;
-
-# config_list is the set of configs that are being tested
-my %config_list;
-my %null_config;
-
-my %dependency;
-
sub assign_configs {
my ($hash, $config) = @_;
doprint "Reading configs from $config\n";
- open (IN, $config)
- or dodie "Failed to read $config";
+ open (IN, $config) or
+ dodie "Failed to read $config";
while (<IN>) {
chomp;
doprint "***************************************\n\n";
}
-my $pass = 1;
-
sub run_config_bisect {
my ($good, $bad, $last_result) = @_;
my $reset = "";
$ret = run_config_bisect_test $config_bisect_type;
if ($ret) {
- doprint "NEW GOOD CONFIG ($pass)\n";
+ doprint "NEW GOOD CONFIG ($pass)\n";
system("cp $output_config $tmpdir/good_config.tmp.$pass");
$pass++;
# Return 3 for good config
return 3;
} else {
- doprint "NEW BAD CONFIG ($pass)\n";
+ doprint "NEW BAD CONFIG ($pass)\n";
system("cp $output_config $tmpdir/bad_config.tmp.$pass");
$pass++;
# Return 4 for bad config
if (!defined($config_bisect_exec)) {
# First check the location that ktest.pl ran
- my @locations = ( "$pwd/config-bisect.pl",
- "$dirname/config-bisect.pl",
- "$builddir/tools/testing/ktest/config-bisect.pl",
- undef );
+ my @locations = (
+ "$pwd/config-bisect.pl",
+ "$dirname/config-bisect.pl",
+ "$builddir/tools/testing/ktest/config-bisect.pl",
+ undef );
foreach my $loc (@locations) {
doprint "loc = $loc\n";
$config_bisect_exec = $loc;
} while ($ret == 3 || $ret == 4);
if ($ret == 2) {
- config_bisect_end "$good_config.tmp", "$bad_config.tmp";
+ config_bisect_end "$good_config.tmp", "$bad_config.tmp";
}
return $ret if ($ret < 0);
return 1;
}
-my %depends;
-my %depcount;
-my $iflevel = 0;
-my @ifdeps;
-
-# prevent recursion
-my %read_kconfigs;
-
sub add_dep {
# $config depends on $dep
my ($config, $dep) = @_;
my $cont = 0;
my $line;
-
if (! -f $kconfig) {
doprint "file $kconfig does not exist, skipping\n";
return;
sub read_depends {
# find out which arch this is by the kconfig file
- open (IN, $output_config)
- or dodie "Failed to read $output_config";
+ open (IN, $output_config) or
+ dodie "Failed to read $output_config";
my $arch;
while (<IN>) {
if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
if (! -f $kconfig && $arch =~ /\d$/) {
my $orig = $arch;
- # some subarchs have numbers, truncate them
+ # some subarchs have numbers, truncate them
$arch =~ s/\d*$//;
$kconfig = "$builddir/arch/$arch/Kconfig";
if (! -f $kconfig) {
my @configs;
while ($dep =~ /[$valid]/) {
-
if ($dep =~ /^[^$valid]*([$valid]+)/) {
my $conf = "CONFIG_" . $1;
return @configs;
}
-my %min_configs;
-my %keep_configs;
-my %save_configs;
-my %processed_configs;
-my %nochange_config;
-
sub test_this_config {
my ($config) = @_;
foreach my $config (@config_keys) {
my $kconfig = chomp_config $config;
if (!defined $depcount{$kconfig}) {
- $depcount{$kconfig} = 0;
+ $depcount{$kconfig} = 0;
}
}
my $take_two = 0;
while (!$done) {
-
my $config;
my $found;
# Sort keys by who is most dependent on
@test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
- @test_configs ;
+ @test_configs ;
# Put configs that did not modify the config at the end.
my $reset = 1;
my $failed = 0;
build "oldconfig" or $failed = 1;
if (!$failed) {
- start_monitor_and_install or $failed = 1;
+ start_monitor_and_install or $failed = 1;
- if ($type eq "test" && !$failed) {
- do_run_test or $failed = 1;
- }
+ if ($type eq "test" && !$failed) {
+ do_run_test or $failed = 1;
+ }
- end_monitor;
+ end_monitor;
}
$in_bisect = 0;
# update new ignore configs
if (defined($ignore_config)) {
- open (OUT, ">$temp_config")
- or dodie "Can't write to $temp_config";
+ open (OUT, ">$temp_config") or
+ dodie "Can't write to $temp_config";
foreach my $config (keys %save_configs) {
print OUT "$save_configs{$config}\n";
}
}
# Save off all the current mandatory configs
- open (OUT, ">$temp_config")
- or dodie "Can't write to $temp_config";
+ open (OUT, ">$temp_config") or
+ dodie "Can't write to $temp_config";
foreach my $config (keys %keep_configs) {
print OUT "$keep_configs{$config}\n";
}
open(IN, $buildlog) or dodie "Can't open $buildlog";
while (<IN>) {
-
# Some compilers use UTF-8 extended for quotes
# for distcc heterogeneous systems, this causes issues
s/$utf8_quote/'/g;
success $i;
}
-$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n";
-
-if ($#ARGV == 0) {
- $ktest_config = $ARGV[0];
- if (! -f $ktest_config) {
- print "$ktest_config does not exist.\n";
- if (!read_yn "Create it?") {
- exit 0;
- }
- }
-}
-
-if (! -f $ktest_config) {
- $newconfig = 1;
- get_test_case;
- open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
- print OUT << "EOF"
-# Generated by ktest.pl
-#
-
-# PWD is a ktest.pl variable that will result in the process working
-# directory that ktest.pl is executed in.
-
-# THIS_DIR is automatically assigned the PWD of the path that generated
-# the config file. It is best to use this variable when assigning other
-# directory paths within this directory. This allows you to easily
-# move the test cases to other locations or to other machines.
-#
-THIS_DIR := $variable{"PWD"}
-
-# Define each test with TEST_START
-# The config options below it will override the defaults
-TEST_START
-TEST_TYPE = $default{"TEST_TYPE"}
-
-DEFAULTS
-EOF
-;
- close(OUT);
-}
-read_config $ktest_config;
-
-if (defined($opt{"LOG_FILE"})) {
- $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
-}
-
-# Append any configs entered in manually to the config file.
-my @new_configs = keys %entered_configs;
-if ($#new_configs >= 0) {
- print "\nAppending entered in configs to $ktest_config\n";
- open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
- foreach my $config (@new_configs) {
- print OUT "$config = $entered_configs{$config}\n";
- $opt{$config} = process_variables($entered_configs{$config});
- }
-}
-
-if (defined($opt{"LOG_FILE"})) {
- if ($opt{"CLEAR_LOG"}) {
- unlink $opt{"LOG_FILE"};
- }
- open(LOG, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
- LOG->autoflush(1);
-}
-
-doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
-
-for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
-
- if (!$i) {
- doprint "DEFAULT OPTIONS:\n";
- } else {
- doprint "\nTEST $i OPTIONS";
- if (defined($repeat_tests{$i})) {
- $repeat = $repeat_tests{$i};
- doprint " ITERATE $repeat";
- }
- doprint "\n";
- }
-
- foreach my $option (sort keys %opt) {
-
- if ($option =~ /\[(\d+)\]$/) {
- next if ($i != $1);
- } else {
- next if ($i);
- }
-
- doprint "$option = $opt{$option}\n";
- }
-}
-
sub option_defined {
my ($option) = @_;
}
sub send_email {
-
if (defined($mailto)) {
if (!defined($mailer)) {
doprint "No email sent: email or mailer not specified in config.\n";
sub cancel_test {
if ($email_when_canceled) {
my $name = get_test_name;
- send_email("KTEST: Your [$name] test was cancelled",
- "Your test started at $script_start_time was cancelled: sig int");
+ send_email("KTEST: Your [$name] test was cancelled",
+ "Your test started at $script_start_time was cancelled: sig int");
}
die "\nCaught Sig Int, test interrupted: $!\n"
}
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n";
+
+if ($#ARGV == 0) {
+ $ktest_config = $ARGV[0];
+ if (! -f $ktest_config) {
+ print "$ktest_config does not exist.\n";
+ if (!read_yn "Create it?") {
+ exit 0;
+ }
+ }
+}
+
+if (! -f $ktest_config) {
+ $newconfig = 1;
+ get_test_case;
+ open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+ print OUT << "EOF"
+# Generated by ktest.pl
+#
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := $variable{"PWD"}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+TEST_TYPE = $default{"TEST_TYPE"}
+
+DEFAULTS
+EOF
+;
+ close(OUT);
+}
+read_config $ktest_config;
+
+if (defined($opt{"LOG_FILE"})) {
+ $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
+}
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+ print "\nAppending entered in configs to $ktest_config\n";
+ open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+ foreach my $config (@new_configs) {
+ print OUT "$config = $entered_configs{$config}\n";
+ $opt{$config} = process_variables($entered_configs{$config});
+ }
+}
+
+if (defined($opt{"LOG_FILE"})) {
+ if ($opt{"CLEAR_LOG"}) {
+ unlink $opt{"LOG_FILE"};
+ }
+ open(LOG, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ LOG->autoflush(1);
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+ if (!$i) {
+ doprint "DEFAULT OPTIONS:\n";
+ } else {
+ doprint "\nTEST $i OPTIONS";
+ if (defined($repeat_tests{$i})) {
+ $repeat = $repeat_tests{$i};
+ doprint " ITERATE $repeat";
+ }
+ doprint "\n";
+ }
+
+ foreach my $option (sort keys %opt) {
+ if ($option =~ /\[(\d+)\]$/) {
+ next if ($i != $1);
+ } else {
+ next if ($i);
+ }
+
+ doprint "$option = $opt{$option}\n";
+ }
+}
+
$SIG{INT} = qw(cancel_test);
# First we need to do is the builds
# The first test may override the PRE_KTEST option
if ($i == 1) {
- if (defined($pre_ktest)) {
- doprint "\n";
- run_command $pre_ktest;
- }
- if ($email_when_started) {
+ if (defined($pre_ktest)) {
+ doprint "\n";
+ run_command $pre_ktest;
+ }
+ if ($email_when_started) {
my $name = get_test_name;
- send_email("KTEST: Your [$name] test was started",
- "Your test was started on $script_start_time");
- }
+ send_email("KTEST: Your [$name] test was started",
+ "Your test was started on $script_start_time");
+ }
}
# Any test can override the POST_KTEST option
my $ret = run_command $pre_test;
if (!$ret && defined($pre_test_die) &&
$pre_test_die) {
- dodie "failed to pre_test\n";
+ dodie "failed to pre_test\n";
}
}
run_command $switch_to_good;
}
-
doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
if ($email_when_finished) {
send_email("KTEST: Your test has finished!",
- "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!");
+ "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!");
}
if (defined($opt{"LOG_FILE"})) {
}
exit 0;
+
+##
+# The following are here to standardize tabs/spaces/etc across the most likely editors
+###
+
+# Local Variables:
+# mode: perl
+# End:
+# vim: softtabstop=4
projects / linux-2.6-microblaze.git / blobdiff