imply SND_SOC_AD193X_I2C
imply SND_SOC_AD1980
imply SND_SOC_AD73311
+ imply SND_SOC_ADAU1372_I2C
+ imply SND_SOC_ADAU1372_SPI
imply SND_SOC_ADAU1373
imply SND_SOC_ADAU1761_I2C
imply SND_SOC_ADAU1761_SPI
imply SND_SOC_MT6358
imply SND_SOC_MT6359
imply SND_SOC_MT6660
+ imply SND_SOC_NAU8315
imply SND_SOC_NAU8540
imply SND_SOC_NAU8810
imply SND_SOC_NAU8822
imply SND_SOC_RT700_SDW
imply SND_SOC_RT711_SDW
imply SND_SOC_RT715_SDW
+ imply SND_SOC_RT715_SDCA_SDW
imply SND_SOC_RT1308_SDW
imply SND_SOC_SGTL5000
imply SND_SOC_SI476X
imply SND_SOC_SIMPLE_AMPLIFIER
+ imply SND_SOC_SIMPLE_MUX
imply SND_SOC_SIRF_AUDIO_CODEC
imply SND_SOC_SPDIF
imply SND_SOC_SSM2305
config SND_SOC_ADAU_UTILS
tristate
+config SND_SOC_ADAU1372
+ tristate
+ select SND_SOC_ADAU_UTILS
+
+config SND_SOC_ADAU1372_I2C
+ tristate "Analog Devices ADAU1372 CODEC (I2C)"
+ depends on I2C
+ select SND_SOC_ADAU1372
+ select REGMAP_I2C
+
+config SND_SOC_ADAU1372_SPI
+ tristate "Analog Devices ADAU1372 CODEC (SPI)"
+ depends on SPI
+ select SND_SOC_ADAU1372
+ select REGMAP_SPI
+
config SND_SOC_ADAU1373
tristate
depends on I2C
help
Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
Converter. In this mode, the device works in standalone mode which
- means that there is no bus to comunicate with it. Stereo mode is not
+ means that there is no bus to communicate with it. Stereo mode is not
supported in this mode.
To compile this driver as a module, choose M here: the module
select REGMAP_I2C
config SND_SOC_ALC5623
- tristate "Realtek ALC5623 CODEC"
+ tristate "Realtek ALC5623 CODEC"
depends on I2C
config SND_SOC_ALC5632
will be called snd-soc-jz4770-codec.
config SND_SOC_L3
- tristate
+ tristate
config SND_SOC_DA7210
tristate
select HDMI
config SND_SOC_ES7134
- tristate "Everest Semi ES7134 CODEC"
+ tristate "Everest Semi ES7134 CODEC"
config SND_SOC_ES7241
- tristate "Everest Semi ES7241 CODEC"
+ tristate "Everest Semi ES7241 CODEC"
config SND_SOC_ES8316
tristate "Everest Semi ES8316 CODEC"
select REGMAP_SPI
config SND_SOC_PCM3008
- tristate
+ tristate
config SND_SOC_PCM3060
- tristate
+ tristate
config SND_SOC_PCM3060_I2C
tristate "Texas Instruments PCM3060 CODEC - I2C"
select REGMAP_SPI
config SND_SOC_PCM5102A
- tristate
+ tristate "Texas Instruments PCM5102A CODEC"
config SND_SOC_PCM512x
tristate
select SND_SOC_RT715
select REGMAP_SOUNDWIRE
+config SND_SOC_RT715_SDCA_SDW
+ tristate "Realtek RT715 SDCA Codec - SDW"
+ depends on SOUNDWIRE
+ select REGMAP_SOUNDWIRE
+ select REGMAP_SOUNDWIRE_MBQ
+
#Freescale sgtl5000 codec
config SND_SOC_SGTL5000
tristate "Freescale SGTL5000 CODEC"
tristate "Simple Audio Amplifier"
select GPIOLIB
+config SND_SOC_SIMPLE_MUX
+ tristate "Simple Audio Mux"
+ select GPIOLIB
+
config SND_SOC_SIRF_AUDIO_CODEC
tristate "SiRF SoC internal audio codec"
select REGMAP_MMIO
rate) and mute.
config SND_SOC_UDA134X
- tristate
+ tristate
config SND_SOC_UDA1380
tristate
Select N if you don't have MT6660 on board.
Select M to build this as module.
+config SND_SOC_NAU8315
+ tristate "Nuvoton Technology Corporation NAU8315 CODEC"
+ depends on GPIOLIB
+
config SND_SOC_NAU8540
- tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
- depends on I2C
+ tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
+ depends on I2C
config SND_SOC_NAU8810
tristate "Nuvoton Technology Corporation NAU88C10 CODEC"
tristate "Texas Instruments TPA6130A2 headphone amplifier"
depends on I2C
+config SND_SOC_LPASS_WSA_MACRO
+ depends on COMMON_CLK
+ tristate "Qualcomm WSA Macro in LPASS(Low Power Audio SubSystem)"
+
+config SND_SOC_LPASS_VA_MACRO
+ depends on COMMON_CLK
+ tristate "Qualcomm VA Macro in LPASS(Low Power Audio SubSystem)"
+
endmenu