{ 0x130A, 0x00 },
{ 0x130F, 0x00 },
};
+ int fsv_old, fsv_new;
/* Bring CS42L42 out of Reset */
gpio_data = snd_hda_codec_read(codec, CS8409_PIN_AFG, 0, AC_VERB_GET_GPIO_DATA, 0);
/* Clear interrupts, by reading interrupt status registers */
cs8409_i2c_bulk_read(cs42l42, irq_regs, ARRAY_SIZE(irq_regs));
- if (cs42l42->full_scale_vol)
- cs8409_i2c_write(cs42l42, 0x2001, 0x01);
+ fsv_old = cs8409_i2c_read(cs42l42, 0x2001);
+ if (cs42l42->full_scale_vol == CS42L42_FULL_SCALE_VOL_0DB)
+ fsv_new = fsv_old & ~CS42L42_FULL_SCALE_VOL_MASK;
+ else
+ fsv_new = fsv_old & CS42L42_FULL_SCALE_VOL_MASK;
+ if (fsv_new != fsv_old)
+ cs8409_i2c_write(cs42l42, 0x2001, fsv_new);
/* we have to explicitly allow unsol event handling even during the
* resume phase so that the jack event is processed properly
* Additionally set HSBIAS_SENSE_EN and Full Scale volume for some variants.
*/
switch (codec->fixup_id) {
- case CS8409_WARLOCK:
- spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
- spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
- break;
- case CS8409_BULLSEYE:
- spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
- spec->scodecs[CS8409_CODEC0]->full_scale_vol = 0;
- break;
case CS8409_CYBORG:
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x00a0;
- spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
+ spec->scodecs[CS8409_CODEC0]->full_scale_vol =
+ CS42L42_FULL_SCALE_VOL_MINUS6DB;
break;
default:
- spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0003;
- spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
+ spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
+ spec->scodecs[CS8409_CODEC0]->full_scale_vol =
+ CS42L42_FULL_SCALE_VOL_MINUS6DB;
break;
}
cs8409_fix_caps(codec, DOLPHIN_LO_PIN_NID);
cs8409_fix_caps(codec, DOLPHIN_AMIC_PIN_NID);
+ spec->scodecs[CS8409_CODEC0]->full_scale_vol = CS42L42_FULL_SCALE_VOL_MINUS6DB;
+ spec->scodecs[CS8409_CODEC1]->full_scale_vol = CS42L42_FULL_SCALE_VOL_MINUS6DB;
+
break;
case HDA_FIXUP_ACT_PROBE:
/* Fix Sample Rate to 48kHz */