net_dbg_ratelimited("%s: detected beacon loss from AP - sending probe request\n",
sdata->name);
#endif
+ ieee80211_cqm_rssi_notify(&sdata->vif,
+ NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL);
/*
* The driver/our work has already reported this event or the
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
- printk(KERN_DEBUG "%s: Connection to AP %pM lost.\n",
- sdata->name, bssid);
+ pr_debug("%s: Connection to AP %pM lost\n", sdata->name, bssid);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
return RX_MGMT_NONE;
if (status_code != WLAN_STATUS_SUCCESS) {
- printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n",
- sdata->name, mgmt->sa, status_code);
- goto out;
+ pr_debug("%s: %pM denied authentication (status %d)\n",
+ sdata->name, mgmt->sa, status_code);
+ ieee80211_destroy_auth_data(sdata, false);
+ return RX_MGMT_CFG80211_RX_AUTH;
}
switch (ifmgd->auth_data->algorithm) {
return RX_MGMT_NONE;
}
- printk(KERN_DEBUG "%s: authenticated\n", sdata->name);
- out:
+ pr_debug("%s: authenticated\n", sdata->name);
ifmgd->auth_data->done = true;
ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
run_again(ifmgd, ifmgd->auth_data->timeout);
goto out_err;
}
if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
- printk(KERN_DEBUG "%s: failed moving %pM to auth\n",
- sdata->name, bssid);
+ pr_debug("%s: failed moving %pM to auth\n", sdata->name, bssid);
goto out_err;
}
mutex_unlock(&sdata->local->sta_mtx);
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
- printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n",
- sdata->name, bssid, reason_code);
+ pr_debug("%s: deauthenticated from %pM (Reason: %u)\n",
+ sdata->name, bssid, reason_code);
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
- sdata->name, mgmt->sa, reason_code);
+ pr_debug("%s: disassociated from %pM (Reason: %u)\n",
+ sdata->name, mgmt->sa, reason_code);
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
- printk(KERN_DEBUG
- "%s: invalid AID value 0x%x; bits 15:14 not set\n",
- sdata->name, aid);
+ pr_debug("%s: invalid AID value 0x%x; bits 15:14 not set\n",
+ sdata->name, aid);
aid &= ~(BIT(15) | BIT(14));
ifmgd->broken_ap = false;
if (aid == 0 || aid > IEEE80211_MAX_AID) {
- printk(KERN_DEBUG
- "%s: invalid AID value %d (out of range), turn off PS\n",
- sdata->name, aid);
+ pr_debug("%s: invalid AID value %d (out of range), turn off PS\n",
+ sdata->name, aid);
aid = 0;
ifmgd->broken_ap = true;
}
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.supp_rates) {
- printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
- sdata->name);
+ pr_debug("%s: no SuppRates element in AssocResp\n",
+ sdata->name);
return false;
}
if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
if (err) {
- printk(KERN_DEBUG
- "%s: failed to move station %pM to desired state\n",
- sdata->name, sta->sta.addr);
+ pr_debug("%s: failed to move station %pM to desired state\n",
+ sdata->name, sta->sta.addr);
WARN_ON(__sta_info_destroy(sta));
mutex_unlock(&sdata->local->sta_mtx);
return false;
status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
- printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x "
- "status=%d aid=%d)\n",
- sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
- capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
+ pr_debug("%s: RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
+ sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
+ capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
pos = mgmt->u.assoc_resp.variable;
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
u32 tu, ms;
tu = get_unaligned_le32(elems.timeout_int + 1);
ms = tu * 1024 / 1000;
- printk(KERN_DEBUG "%s: %pM rejected association temporarily; "
- "comeback duration %u TU (%u ms)\n",
- sdata->name, mgmt->sa, tu, ms);
+ pr_debug("%s: %pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
+ sdata->name, mgmt->sa, tu, ms);
assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
if (ms > IEEE80211_ASSOC_TIMEOUT)
run_again(ifmgd, assoc_data->timeout);
*bss = assoc_data->bss;
if (status_code != WLAN_STATUS_SUCCESS) {
- printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n",
- sdata->name, mgmt->sa, status_code);
+ pr_debug("%s: %pM denied association (code=%d)\n",
+ sdata->name, mgmt->sa, status_code);
ieee80211_destroy_assoc_data(sdata, false);
} else {
- printk(KERN_DEBUG "%s: associated\n", sdata->name);
+ pr_debug("%s: associated\n", sdata->name);
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
/* got probe response, continue with auth */
- printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name);
+ pr_debug("%s: direct probe responded\n", sdata->name);
ifmgd->auth_data->tries = 0;
ifmgd->auth_data->timeout = jiffies;
run_again(ifmgd, ifmgd->auth_data->timeout);
auth_data->tries++;
if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
- printk(KERN_DEBUG "%s: authentication with %pM timed out\n",
- sdata->name, auth_data->bss->bssid);
+ pr_debug("%s: authentication with %pM timed out\n",
+ sdata->name, auth_data->bss->bssid);
/*
* Most likely AP is not in the range so remove the
}
if (auth_data->bss->proberesp_ies) {
- printk(KERN_DEBUG "%s: send auth to %pM (try %d/%d)\n",
- sdata->name, auth_data->bss->bssid, auth_data->tries,
- IEEE80211_AUTH_MAX_TRIES);
+ pr_debug("%s: send auth to %pM (try %d/%d)\n",
+ sdata->name, auth_data->bss->bssid, auth_data->tries,
+ IEEE80211_AUTH_MAX_TRIES);
auth_data->expected_transaction = 2;
ieee80211_send_auth(sdata, 1, auth_data->algorithm,
} else {
const u8 *ssidie;
- printk(KERN_DEBUG "%s: direct probe to %pM (try %d/%i)\n",
- sdata->name, auth_data->bss->bssid, auth_data->tries,
- IEEE80211_AUTH_MAX_TRIES);
+ pr_debug("%s: direct probe to %pM (try %d/%i)\n",
+ sdata->name, auth_data->bss->bssid, auth_data->tries,
+ IEEE80211_AUTH_MAX_TRIES);
ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
if (!ssidie)
assoc_data->tries++;
if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
- printk(KERN_DEBUG "%s: association with %pM timed out\n",
- sdata->name, assoc_data->bss->bssid);
+ pr_debug("%s: association with %pM timed out\n",
+ sdata->name, assoc_data->bss->bssid);
/*
* Most likely AP is not in the range so remove the
return -ETIMEDOUT;
}
- printk(KERN_DEBUG "%s: associate with %pM (try %d/%d)\n",
- sdata->name, assoc_data->bss->bssid, assoc_data->tries,
- IEEE80211_ASSOC_MAX_TRIES);
+ pr_debug("%s: associate with %pM (try %d/%d)\n",
+ sdata->name, assoc_data->bss->bssid, assoc_data->tries,
+ IEEE80211_ASSOC_MAX_TRIES);
ieee80211_send_assoc(sdata);
assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
* since we look at probe response/beacon data here
* it should be OK.
*/
- printk(KERN_DEBUG
- "%s: Wrong control channel: center-freq: %d"
- " ht-cfreq: %d ht->primary_chan: %d"
- " band: %d. Disabling HT.\n",
- sdata->name, cbss->channel->center_freq,
- ht_cfreq, ht_oper->primary_chan,
- cbss->channel->band);
+ pr_debug("%s: Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ sdata->name, cbss->channel->center_freq,
+ ht_cfreq, ht_oper->primary_chan,
+ cbss->channel->band);
ht_oper = NULL;
}
}
if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
/* can only fail due to HT40+/- mismatch */
channel_type = NL80211_CHAN_HT20;
- printk(KERN_DEBUG
- "%s: disabling 40 MHz due to multi-vif mismatch\n",
- sdata->name);
+ pr_debug("%s: disabling 40 MHz due to multi-vif mismatch\n",
+ sdata->name);
ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
WARN_ON(!ieee80211_set_channel_type(local, sdata,
channel_type));
* we can connect -- with a warning.
*/
if (!basic_rates && min_rate_index >= 0) {
- printk(KERN_DEBUG
- "%s: No basic rates, using min rate instead.\n",
- sdata->name);
+ pr_debug("%s: No basic rates, using min rate instead\n",
+ sdata->name);
basic_rates = BIT(min_rate_index);
}
err = sta_info_insert(sta);
sta = NULL;
if (err) {
- printk(KERN_DEBUG
- "%s: failed to insert STA entry for the AP (error %d)\n",
- sdata->name, err);
+ pr_debug("%s: failed to insert STA entry for the AP (error %d)\n",
+ sdata->name, err);
return err;
}
} else
if (ifmgd->associated)
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
- printk(KERN_DEBUG "%s: authenticate with %pM\n",
- sdata->name, req->bss->bssid);
+ pr_debug("%s: authenticate with %pM\n", sdata->name, req->bss->bssid);
err = ieee80211_prep_connection(sdata, req->bss, false);
if (err)
* Wait up to one beacon interval ...
* should this be more if we miss one?
*/
- printk(KERN_DEBUG "%s: waiting for beacon from %pM\n",
- sdata->name, ifmgd->bssid);
+ pr_debug("%s: waiting for beacon from %pM\n",
+ sdata->name, ifmgd->bssid);
assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
} else {
assoc_data->have_beacon = true;
corrupt_type = "beacon";
} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
corrupt_type = "probe response";
- printk(KERN_DEBUG "%s: associating with AP with corrupt %s\n",
- sdata->name, corrupt_type);
+ pr_debug("%s: associating with AP with corrupt %s\n",
+ sdata->name, corrupt_type);
}
err = 0;
return 0;
}
- printk(KERN_DEBUG
- "%s: deauthenticating from %pM by local choice (reason=%d)\n",
- sdata->name, req->bssid, req->reason_code);
+ pr_debug("%s: deauthenticating from %pM by local choice (reason=%d)\n",
+ sdata->name, req->bssid, req->reason_code);
if (ifmgd->associated &&
ether_addr_equal(ifmgd->associated->bssid, req->bssid))
return -ENOLINK;
}
- printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
- sdata->name, req->bss->bssid, req->reason_code);
+ pr_debug("%s: disassociating from %pM by local choice (reason=%d)\n",
+ sdata->name, req->bss->bssid, req->reason_code);
memcpy(bssid, req->bss->bssid, ETH_ALEN);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
projects / linux-2.6-microblaze.git / blobdiff