* interface. A frame is identified by its source MAC address and its HSR
* sequence number. This code keeps track of senders and their sequence numbers
* to allow filtering of duplicate frames, and to detect HSR ring errors.
+ * Same code handles filtering of duplicates for PRP as well.
*/
#include <linux/if_ether.h>
kfree(node);
}
+void prp_handle_san_frame(bool san, enum hsr_port_type port,
+ struct hsr_node *node)
+{
+ /* Mark if the SAN node is over LAN_A or LAN_B */
+ if (port == HSR_PT_SLAVE_A) {
+ node->san_a = true;
+ return;
+ }
+
+ if (port == HSR_PT_SLAVE_B)
+ node->san_b = true;
+}
+
/* Allocate an hsr_node and add it to node_db. 'addr' is the node's address_A;
* seq_out is used to initialize filtering of outgoing duplicate frames
* originating from the newly added node.
static struct hsr_node *hsr_add_node(struct hsr_priv *hsr,
struct list_head *node_db,
unsigned char addr[],
- u16 seq_out)
+ u16 seq_out, bool san,
+ enum hsr_port_type rx_port)
{
struct hsr_node *new_node, *node;
unsigned long now;
for (i = 0; i < HSR_PT_PORTS; i++)
new_node->seq_out[i] = seq_out;
+ if (san && hsr->proto_ops->handle_san_frame)
+ hsr->proto_ops->handle_san_frame(san, rx_port, new_node);
+
spin_lock_bh(&hsr->list_lock);
list_for_each_entry_rcu(node, node_db, mac_list,
lockdep_is_held(&hsr->list_lock)) {
return node;
}
+void prp_update_san_info(struct hsr_node *node, bool is_sup)
+{
+ if (!is_sup)
+ return;
+
+ node->san_a = false;
+ node->san_b = false;
+}
+
/* Get the hsr_node from which 'skb' was sent.
*/
-struct hsr_node *hsr_get_node(struct hsr_port *port, struct sk_buff *skb,
- bool is_sup)
+struct hsr_node *hsr_get_node(struct hsr_port *port, struct list_head *node_db,
+ struct sk_buff *skb, bool is_sup,
+ enum hsr_port_type rx_port)
{
- struct list_head *node_db = &port->hsr->node_db;
struct hsr_priv *hsr = port->hsr;
struct hsr_node *node;
struct ethhdr *ethhdr;
+ struct prp_rct *rct;
+ bool san = false;
u16 seq_out;
if (!skb_mac_header_was_set(skb))
ethhdr = (struct ethhdr *)skb_mac_header(skb);
list_for_each_entry_rcu(node, node_db, mac_list) {
- if (ether_addr_equal(node->macaddress_A, ethhdr->h_source))
+ if (ether_addr_equal(node->macaddress_A, ethhdr->h_source)) {
+ if (hsr->proto_ops->update_san_info)
+ hsr->proto_ops->update_san_info(node, is_sup);
return node;
- if (ether_addr_equal(node->macaddress_B, ethhdr->h_source))
+ }
+ if (ether_addr_equal(node->macaddress_B, ethhdr->h_source)) {
+ if (hsr->proto_ops->update_san_info)
+ hsr->proto_ops->update_san_info(node, is_sup);
return node;
+ }
}
- /* Everyone may create a node entry, connected node to a HSR device. */
-
+ /* Everyone may create a node entry, connected node to a HSR/PRP
+ * device.
+ */
if (ethhdr->h_proto == htons(ETH_P_PRP) ||
ethhdr->h_proto == htons(ETH_P_HSR)) {
/* Use the existing sequence_nr from the tag as starting point
*/
seq_out = hsr_get_skb_sequence_nr(skb) - 1;
} else {
- /* this is called also for frames from master port and
- * so warn only for non master ports
- */
- if (port->type != HSR_PT_MASTER)
- WARN_ONCE(1, "%s: Non-HSR frame\n", __func__);
- seq_out = HSR_SEQNR_START;
+ rct = skb_get_PRP_rct(skb);
+ if (rct && prp_check_lsdu_size(skb, rct, is_sup)) {
+ seq_out = prp_get_skb_sequence_nr(rct);
+ } else {
+ if (rx_port != HSR_PT_MASTER)
+ san = true;
+ seq_out = HSR_SEQNR_START;
+ }
}
- return hsr_add_node(hsr, node_db, ethhdr->h_source, seq_out);
+ return hsr_add_node(hsr, node_db, ethhdr->h_source, seq_out,
+ san, rx_port);
}
/* Use the Supervision frame's info about an eventual macaddress_B for merging
* nodes that has previously had their macaddress_B registered as a separate
* node.
*/
-void hsr_handle_sup_frame(struct sk_buff *skb, struct hsr_node *node_curr,
- struct hsr_port *port_rcv)
+void hsr_handle_sup_frame(struct hsr_frame_info *frame)
{
+ struct hsr_node *node_curr = frame->node_src;
+ struct hsr_port *port_rcv = frame->port_rcv;
struct hsr_priv *hsr = port_rcv->hsr;
struct hsr_sup_payload *hsr_sp;
struct hsr_node *node_real;
+ struct sk_buff *skb = NULL;
struct list_head *node_db;
struct ethhdr *ethhdr;
int i;
+ /* Here either frame->skb_hsr or frame->skb_prp should be
+ * valid as supervision frame always will have protocol
+ * header info.
+ */
+ if (frame->skb_hsr)
+ skb = frame->skb_hsr;
+ else if (frame->skb_prp)
+ skb = frame->skb_prp;
+ if (!skb)
+ return;
+
ethhdr = (struct ethhdr *)skb_mac_header(skb);
/* Leave the ethernet header. */
if (!node_real)
/* No frame received from AddrA of this node yet */
node_real = hsr_add_node(hsr, node_db, hsr_sp->macaddress_A,
- HSR_SEQNR_START - 1);
+ HSR_SEQNR_START - 1, true,
+ port_rcv->type);
if (!node_real)
goto done; /* No mem */
if (node_real == node_curr)
kfree_rcu(node_curr, rcu_head);
done:
- skb_push(skb, sizeof(struct hsrv1_ethhdr_sp));
+ /* PRP uses v0 header */
+ if (ethhdr->h_proto == htons(ETH_P_HSR))
+ skb_push(skb, sizeof(struct hsrv1_ethhdr_sp));
+ else
+ skb_push(skb, sizeof(struct hsrv0_ethhdr_sp));
}
/* 'skb' is a frame meant for this host, that is to be passed to upper layers.
projects / linux-2.6-microblaze.git / blobdiff