unsigned int page_mask;
};
-typedef int (*set_dirty_func_t)(struct page *page);
-
-static void __put_user_pages_dirty(struct page **pages,
- unsigned long npages,
- set_dirty_func_t sdf)
-{
- unsigned long index;
-
- for (index = 0; index < npages; index++) {
- struct page *page = compound_head(pages[index]);
-
- /*
- * Checking PageDirty at this point may race with
- * clear_page_dirty_for_io(), but that's OK. Two key cases:
- *
- * 1) This code sees the page as already dirty, so it skips
- * the call to sdf(). That could happen because
- * clear_page_dirty_for_io() called page_mkclean(),
- * followed by set_page_dirty(). However, now the page is
- * going to get written back, which meets the original
- * intention of setting it dirty, so all is well:
- * clear_page_dirty_for_io() goes on to call
- * TestClearPageDirty(), and write the page back.
- *
- * 2) This code sees the page as clean, so it calls sdf().
- * The page stays dirty, despite being written back, so it
- * gets written back again in the next writeback cycle.
- * This is harmless.
- */
- if (!PageDirty(page))
- sdf(page);
-
- put_user_page(page);
- }
-}
-
/**
- * put_user_pages_dirty() - release and dirty an array of gup-pinned pages
- * @pages: array of pages to be marked dirty and released.
+ * put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
+ * @pages: array of pages to be maybe marked dirty, and definitely released.
* @npages: number of pages in the @pages array.
+ * @make_dirty: whether to mark the pages dirty
*
* "gup-pinned page" refers to a page that has had one of the get_user_pages()
* variants called on that page.
*
* For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
+ * compound page) dirty, if @make_dirty is true, and if the page was previously
+ * listed as clean. In any case, releases all pages using put_user_page(),
+ * possibly via put_user_pages(), for the non-dirty case.
*
* Please see the put_user_page() documentation for details.
*
- * set_page_dirty(), which does not lock the page, is used here.
- * Therefore, it is the caller's responsibility to ensure that this is
- * safe. If not, then put_user_pages_dirty_lock() should be called instead.
+ * set_page_dirty_lock() is used internally. If instead, set_page_dirty() is
+ * required, then the caller should a) verify that this is really correct,
+ * because _lock() is usually required, and b) hand code it:
+ * set_page_dirty_lock(), put_user_page().
*
*/
-void put_user_pages_dirty(struct page **pages, unsigned long npages)
+void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
+ bool make_dirty)
{
- __put_user_pages_dirty(pages, npages, set_page_dirty);
-}
-EXPORT_SYMBOL(put_user_pages_dirty);
+ unsigned long index;
-/**
- * put_user_pages_dirty_lock() - release and dirty an array of gup-pinned pages
- * @pages: array of pages to be marked dirty and released.
- * @npages: number of pages in the @pages array.
- *
- * For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
- *
- * Please see the put_user_page() documentation for details.
- *
- * This is just like put_user_pages_dirty(), except that it invokes
- * set_page_dirty_lock(), instead of set_page_dirty().
- *
- */
-void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
-{
- __put_user_pages_dirty(pages, npages, set_page_dirty_lock);
+ /*
+ * TODO: this can be optimized for huge pages: if a series of pages is
+ * physically contiguous and part of the same compound page, then a
+ * single operation to the head page should suffice.
+ */
+
+ if (!make_dirty) {
+ put_user_pages(pages, npages);
+ return;
+ }
+
+ for (index = 0; index < npages; index++) {
+ struct page *page = compound_head(pages[index]);
+ /*
+ * Checking PageDirty at this point may race with
+ * clear_page_dirty_for_io(), but that's OK. Two key
+ * cases:
+ *
+ * 1) This code sees the page as already dirty, so it
+ * skips the call to set_page_dirty(). That could happen
+ * because clear_page_dirty_for_io() called
+ * page_mkclean(), followed by set_page_dirty().
+ * However, now the page is going to get written back,
+ * which meets the original intention of setting it
+ * dirty, so all is well: clear_page_dirty_for_io() goes
+ * on to call TestClearPageDirty(), and write the page
+ * back.
+ *
+ * 2) This code sees the page as clean, so it calls
+ * set_page_dirty(). The page stays dirty, despite being
+ * written back, so it gets written back again in the
+ * next writeback cycle. This is harmless.
+ */
+ if (!PageDirty(page))
+ set_page_dirty_lock(page);
+ put_user_page(page);
+ }
}
EXPORT_SYMBOL(put_user_pages_dirty_lock);
spin_unlock(ptl);
return follow_page_pte(vma, address, pmd, flags, &ctx->pgmap);
}
- if (flags & FOLL_SPLIT) {
+ if (flags & (FOLL_SPLIT | FOLL_SPLIT_PMD)) {
int ret;
page = pmd_page(*pmd);
if (is_huge_zero_page(page)) {
split_huge_pmd(vma, pmd, address);
if (pmd_trans_unstable(pmd))
ret = -EBUSY;
- } else {
+ } else if (flags & FOLL_SPLIT) {
if (unlikely(!try_get_page(page))) {
spin_unlock(ptl);
return ERR_PTR(-ENOMEM);
put_page(page);
if (pmd_none(*pmd))
return no_page_table(vma, flags);
+ } else { /* flags & FOLL_SPLIT_PMD */
+ spin_unlock(ptl);
+ split_huge_pmd(vma, pmd, address);
+ ret = pte_alloc(mm, pmd) ? -ENOMEM : 0;
}
return ret ? ERR_PTR(ret) :
if (!nr_pages)
return 0;
+ start = untagged_addr(start);
+
VM_BUG_ON(!!pages != !!(gup_flags & FOLL_GET));
/*
struct vm_area_struct *vma;
vm_fault_t ret, major = 0;
+ address = untagged_addr(address);
+
if (unlocked)
fault_flags |= FAULT_FLAG_ALLOW_RETRY;
* gup may start from a tail page. Advance step by the left
* part.
*/
- step = (1 << compound_order(head)) - (pages[i] - head);
+ step = compound_nr(head) - (pages[i] - head);
/*
* If we get a page from the CMA zone, since we are going to
* be pinning these entries, we might as well move them out
projects / linux-2.6-microblaze.git / blobdiff