#include <linux/kallsyms.h>
#include <linux/kgdb.h>
#include <linux/kdb.h>
+#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
static unsigned int kdb_continue_catastrophic;
#endif
-/* kdb_commands describes the available commands. */
-static kdbtab_t *kdb_commands;
-#define KDB_BASE_CMD_MAX 50
-static int kdb_max_commands = KDB_BASE_CMD_MAX;
-static kdbtab_t kdb_base_commands[KDB_BASE_CMD_MAX];
-#define for_each_kdbcmd(cmd, num) \
- for ((cmd) = kdb_base_commands, (num) = 0; \
- num < kdb_max_commands; \
- num++, num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++)
+/* kdb_cmds_head describes the available commands. */
+static LIST_HEAD(kdb_cmds_head);
typedef struct _kdbmsg {
int km_diag; /* kdb diagnostic */
* KDB_ENVBUFSIZE if required).
*/
-static char *__env[] = {
+static char *__env[31] = {
#if defined(CONFIG_SMP)
- "PROMPT=[%d]kdb> ",
+ "PROMPT=[%d]kdb> ",
#else
- "PROMPT=kdb> ",
+ "PROMPT=kdb> ",
#endif
- "MOREPROMPT=more> ",
- "RADIX=16",
- "MDCOUNT=8", /* lines of md output */
- KDB_PLATFORM_ENV,
- "DTABCOUNT=30",
- "NOSECT=1",
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
- (char *)0,
+ "MOREPROMPT=more> ",
+ "RADIX=16",
+ "MDCOUNT=8", /* lines of md output */
+ KDB_PLATFORM_ENV,
+ "DTABCOUNT=30",
+ "NOSECT=1",
};
static const int __nenv = ARRAY_SIZE(__env);
return diag;
}
+/*
+ * kdb_setenv() - Alter an existing environment variable or create a new one.
+ * @var: Name of the variable
+ * @val: Value of the variable
+ *
+ * Return: Zero on success, a kdb diagnostic on failure.
+ */
+static int kdb_setenv(const char *var, const char *val)
+{
+ int i;
+ char *ep;
+ size_t varlen, vallen;
+
+ varlen = strlen(var);
+ vallen = strlen(val);
+ ep = kdballocenv(varlen + vallen + 2);
+ if (ep == (char *)0)
+ return KDB_ENVBUFFULL;
+
+ sprintf(ep, "%s=%s", var, val);
+
+ for (i = 0; i < __nenv; i++) {
+ if (__env[i]
+ && ((strncmp(__env[i], var, varlen) == 0)
+ && ((__env[i][varlen] == '\0')
+ || (__env[i][varlen] == '=')))) {
+ __env[i] = ep;
+ return 0;
+ }
+ }
+
+ /*
+ * Wasn't existing variable. Fit into slot.
+ */
+ for (i = 0; i < __nenv-1; i++) {
+ if (__env[i] == (char *)0) {
+ __env[i] = ep;
+ return 0;
+ }
+ }
+
+ return KDB_ENVFULL;
+}
+
+/*
+ * kdb_printenv() - Display the current environment variables.
+ */
+static void kdb_printenv(void)
+{
+ int i;
+
+ for (i = 0; i < __nenv; i++) {
+ if (__env[i])
+ kdb_printf("%s\n", __env[i]);
+ }
+}
+
/*
* kdbgetularg - This function will convert a numeric string into an
* unsigned long value.
*/
int kdb_set(int argc, const char **argv)
{
- int i;
- char *ep;
- size_t varlen, vallen;
-
/*
* we can be invoked two ways:
* set var=value argv[1]="var", argv[2]="value"
* Tokenizer squashed the '=' sign. argv[1] is variable
* name, argv[2] = value.
*/
- varlen = strlen(argv[1]);
- vallen = strlen(argv[2]);
- ep = kdballocenv(varlen + vallen + 2);
- if (ep == (char *)0)
- return KDB_ENVBUFFULL;
-
- sprintf(ep, "%s=%s", argv[1], argv[2]);
-
- ep[varlen+vallen+1] = '\0';
-
- for (i = 0; i < __nenv; i++) {
- if (__env[i]
- && ((strncmp(__env[i], argv[1], varlen) == 0)
- && ((__env[i][varlen] == '\0')
- || (__env[i][varlen] == '=')))) {
- __env[i] = ep;
- return 0;
- }
- }
-
- /*
- * Wasn't existing variable. Fit into slot.
- */
- for (i = 0; i < __nenv-1; i++) {
- if (__env[i] == (char *)0) {
- __env[i] = ep;
- return 0;
- }
- }
-
- return KDB_ENVFULL;
+ return kdb_setenv(argv[1], argv[2]);
}
static int kdb_check_regs(void)
char *cp;
char *cpp, quoted;
kdbtab_t *tp;
- int i, escaped, ignore_errors = 0, check_grep = 0;
+ int escaped, ignore_errors = 0, check_grep = 0;
/*
* First tokenize the command string.
++argv[0];
}
- for_each_kdbcmd(tp, i) {
- if (tp->cmd_name) {
- /*
- * If this command is allowed to be abbreviated,
- * check to see if this is it.
- */
-
- if (tp->cmd_minlen
- && (strlen(argv[0]) <= tp->cmd_minlen)) {
- if (strncmp(argv[0],
- tp->cmd_name,
- tp->cmd_minlen) == 0) {
- break;
- }
- }
+ list_for_each_entry(tp, &kdb_cmds_head, list_node) {
+ /*
+ * If this command is allowed to be abbreviated,
+ * check to see if this is it.
+ */
+ if (tp->cmd_minlen && (strlen(argv[0]) <= tp->cmd_minlen) &&
+ (strncmp(argv[0], tp->cmd_name, tp->cmd_minlen) == 0))
+ break;
- if (strcmp(argv[0], tp->cmd_name) == 0)
- break;
- }
+ if (strcmp(argv[0], tp->cmd_name) == 0)
+ break;
}
/*
* few characters of this match any of the known commands.
* e.g., md1c20 should match md.
*/
- if (i == kdb_max_commands) {
- for_each_kdbcmd(tp, i) {
- if (tp->cmd_name) {
- if (strncmp(argv[0],
- tp->cmd_name,
- strlen(tp->cmd_name)) == 0) {
- break;
- }
- }
+ if (list_entry_is_head(tp, &kdb_cmds_head, list_node)) {
+ list_for_each_entry(tp, &kdb_cmds_head, list_node) {
+ if (strncmp(argv[0], tp->cmd_name,
+ strlen(tp->cmd_name)) == 0)
+ break;
}
}
- if (i < kdb_max_commands) {
+ if (!list_entry_is_head(tp, &kdb_cmds_head, list_node)) {
int result;
if (!kdb_check_flags(tp->cmd_flags, kdb_cmd_enabled, argc <= 1))
static int kdb_env(int argc, const char **argv)
{
- int i;
-
- for (i = 0; i < __nenv; i++) {
- if (__env[i])
- kdb_printf("%s\n", __env[i]);
- }
+ kdb_printenv();
if (KDB_DEBUG(MASK))
kdb_printf("KDBDEBUG=0x%x\n",
int adjust = 0;
int n = 0;
int skip = 0;
- struct kmsg_dumper dumper;
+ struct kmsg_dump_iter iter;
size_t len;
char buf[201];
kdb_set(2, setargs);
}
- kmsg_dump_rewind_nolock(&dumper);
- while (kmsg_dump_get_line_nolock(&dumper, 1, NULL, 0, NULL))
+ kmsg_dump_rewind(&iter);
+ while (kmsg_dump_get_line(&iter, 1, NULL, 0, NULL))
n++;
if (lines < 0) {
if (skip >= n || skip < 0)
return 0;
- kmsg_dump_rewind_nolock(&dumper);
- while (kmsg_dump_get_line_nolock(&dumper, 1, buf, sizeof(buf), &len)) {
+ kmsg_dump_rewind(&iter);
+ while (kmsg_dump_get_line(&iter, 1, buf, sizeof(buf), &len)) {
if (skip) {
skip--;
continue;
static int kdb_help(int argc, const char **argv)
{
kdbtab_t *kt;
- int i;
kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description");
kdb_printf("-----------------------------"
"-----------------------------\n");
- for_each_kdbcmd(kt, i) {
+ list_for_each_entry(kt, &kdb_cmds_head, list_node) {
char *space = "";
if (KDB_FLAG(CMD_INTERRUPT))
return 0;
- if (!kt->cmd_name)
- continue;
if (!kdb_check_flags(kt->cmd_flags, kdb_cmd_enabled, true))
continue;
if (strlen(kt->cmd_usage) > 20)
* Returns:
* zero for success, one if a duplicate command.
*/
-#define kdb_command_extend 50 /* arbitrary */
int kdb_register_flags(char *cmd,
kdb_func_t func,
char *usage,
short minlen,
kdb_cmdflags_t flags)
{
- int i;
kdbtab_t *kp;
- /*
- * Brute force method to determine duplicates
- */
- for_each_kdbcmd(kp, i) {
- if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) {
+ list_for_each_entry(kp, &kdb_cmds_head, list_node) {
+ if (strcmp(kp->cmd_name, cmd) == 0) {
kdb_printf("Duplicate kdb command registered: "
"%s, func %px help %s\n", cmd, func, help);
return 1;
}
}
- /*
- * Insert command into first available location in table
- */
- for_each_kdbcmd(kp, i) {
- if (kp->cmd_name == NULL)
- break;
- }
-
- if (i >= kdb_max_commands) {
- kdbtab_t *new = kmalloc_array(kdb_max_commands -
- KDB_BASE_CMD_MAX +
- kdb_command_extend,
- sizeof(*new),
- GFP_KDB);
- if (!new) {
- kdb_printf("Could not allocate new kdb_command "
- "table\n");
- return 1;
- }
- if (kdb_commands) {
- memcpy(new, kdb_commands,
- (kdb_max_commands - KDB_BASE_CMD_MAX) * sizeof(*new));
- kfree(kdb_commands);
- }
- memset(new + kdb_max_commands - KDB_BASE_CMD_MAX, 0,
- kdb_command_extend * sizeof(*new));
- kdb_commands = new;
- kp = kdb_commands + kdb_max_commands - KDB_BASE_CMD_MAX;
- kdb_max_commands += kdb_command_extend;
+ kp = kmalloc(sizeof(*kp), GFP_KDB);
+ if (!kp) {
+ kdb_printf("Could not allocate new kdb_command table\n");
+ return 1;
}
kp->cmd_name = cmd;
kp->cmd_help = help;
kp->cmd_minlen = minlen;
kp->cmd_flags = flags;
+ kp->is_dynamic = true;
+
+ list_add_tail(&kp->list_node, &kdb_cmds_head);
return 0;
}
EXPORT_SYMBOL_GPL(kdb_register_flags);
+/*
+ * kdb_register_table() - This function is used to register a kdb command
+ * table.
+ * @kp: pointer to kdb command table
+ * @len: length of kdb command table
+ */
+void kdb_register_table(kdbtab_t *kp, size_t len)
+{
+ while (len--) {
+ list_add_tail(&kp->list_node, &kdb_cmds_head);
+ kp++;
+ }
+}
/*
* kdb_register - Compatibility register function for commands that do
*/
int kdb_unregister(char *cmd)
{
- int i;
kdbtab_t *kp;
/*
* find the command.
*/
- for_each_kdbcmd(kp, i) {
- if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) {
- kp->cmd_name = NULL;
+ list_for_each_entry(kp, &kdb_cmds_head, list_node) {
+ if (strcmp(kp->cmd_name, cmd) == 0) {
+ list_del(&kp->list_node);
+ if (kp->is_dynamic)
+ kfree(kp);
return 0;
}
}
}
EXPORT_SYMBOL_GPL(kdb_unregister);
-/* Initialize the kdb command table. */
-static void __init kdb_inittab(void)
-{
- int i;
- kdbtab_t *kp;
-
- for_each_kdbcmd(kp, i)
- kp->cmd_name = NULL;
-
- kdb_register_flags("md", kdb_md, "<vaddr>",
- "Display Memory Contents, also mdWcN, e.g. md8c1", 1,
- KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
- kdb_register_flags("mdr", kdb_md, "<vaddr> <bytes>",
- "Display Raw Memory", 0,
- KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
- kdb_register_flags("mdp", kdb_md, "<paddr> <bytes>",
- "Display Physical Memory", 0,
- KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
- kdb_register_flags("mds", kdb_md, "<vaddr>",
- "Display Memory Symbolically", 0,
- KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
- kdb_register_flags("mm", kdb_mm, "<vaddr> <contents>",
- "Modify Memory Contents", 0,
- KDB_ENABLE_MEM_WRITE | KDB_REPEAT_NO_ARGS);
- kdb_register_flags("go", kdb_go, "[<vaddr>]",
- "Continue Execution", 1,
- KDB_ENABLE_REG_WRITE | KDB_ENABLE_ALWAYS_SAFE_NO_ARGS);
- kdb_register_flags("rd", kdb_rd, "",
- "Display Registers", 0,
- KDB_ENABLE_REG_READ);
- kdb_register_flags("rm", kdb_rm, "<reg> <contents>",
- "Modify Registers", 0,
- KDB_ENABLE_REG_WRITE);
- kdb_register_flags("ef", kdb_ef, "<vaddr>",
- "Display exception frame", 0,
- KDB_ENABLE_MEM_READ);
- kdb_register_flags("bt", kdb_bt, "[<vaddr>]",
- "Stack traceback", 1,
- KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS);
- kdb_register_flags("btp", kdb_bt, "<pid>",
- "Display stack for process <pid>", 0,
- KDB_ENABLE_INSPECT);
- kdb_register_flags("bta", kdb_bt, "[D|R|S|T|C|Z|E|U|I|M|A]",
- "Backtrace all processes matching state flag", 0,
- KDB_ENABLE_INSPECT);
- kdb_register_flags("btc", kdb_bt, "",
- "Backtrace current process on each cpu", 0,
- KDB_ENABLE_INSPECT);
- kdb_register_flags("btt", kdb_bt, "<vaddr>",
- "Backtrace process given its struct task address", 0,
- KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS);
- kdb_register_flags("env", kdb_env, "",
- "Show environment variables", 0,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("set", kdb_set, "",
- "Set environment variables", 0,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("help", kdb_help, "",
- "Display Help Message", 1,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("?", kdb_help, "",
- "Display Help Message", 0,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("cpu", kdb_cpu, "<cpunum>",
- "Switch to new cpu", 0,
- KDB_ENABLE_ALWAYS_SAFE_NO_ARGS);
- kdb_register_flags("kgdb", kdb_kgdb, "",
- "Enter kgdb mode", 0, 0);
- kdb_register_flags("ps", kdb_ps, "[<flags>|A]",
- "Display active task list", 0,
- KDB_ENABLE_INSPECT);
- kdb_register_flags("pid", kdb_pid, "<pidnum>",
- "Switch to another task", 0,
- KDB_ENABLE_INSPECT);
- kdb_register_flags("reboot", kdb_reboot, "",
- "Reboot the machine immediately", 0,
- KDB_ENABLE_REBOOT);
+static kdbtab_t maintab[] = {
+ { .cmd_name = "md",
+ .cmd_func = kdb_md,
+ .cmd_usage = "<vaddr>",
+ .cmd_help = "Display Memory Contents, also mdWcN, e.g. md8c1",
+ .cmd_minlen = 1,
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+ },
+ { .cmd_name = "mdr",
+ .cmd_func = kdb_md,
+ .cmd_usage = "<vaddr> <bytes>",
+ .cmd_help = "Display Raw Memory",
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+ },
+ { .cmd_name = "mdp",
+ .cmd_func = kdb_md,
+ .cmd_usage = "<paddr> <bytes>",
+ .cmd_help = "Display Physical Memory",
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+ },
+ { .cmd_name = "mds",
+ .cmd_func = kdb_md,
+ .cmd_usage = "<vaddr>",
+ .cmd_help = "Display Memory Symbolically",
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+ },
+ { .cmd_name = "mm",
+ .cmd_func = kdb_mm,
+ .cmd_usage = "<vaddr> <contents>",
+ .cmd_help = "Modify Memory Contents",
+ .cmd_flags = KDB_ENABLE_MEM_WRITE | KDB_REPEAT_NO_ARGS,
+ },
+ { .cmd_name = "go",
+ .cmd_func = kdb_go,
+ .cmd_usage = "[<vaddr>]",
+ .cmd_help = "Continue Execution",
+ .cmd_minlen = 1,
+ .cmd_flags = KDB_ENABLE_REG_WRITE |
+ KDB_ENABLE_ALWAYS_SAFE_NO_ARGS,
+ },
+ { .cmd_name = "rd",
+ .cmd_func = kdb_rd,
+ .cmd_usage = "",
+ .cmd_help = "Display Registers",
+ .cmd_flags = KDB_ENABLE_REG_READ,
+ },
+ { .cmd_name = "rm",
+ .cmd_func = kdb_rm,
+ .cmd_usage = "<reg> <contents>",
+ .cmd_help = "Modify Registers",
+ .cmd_flags = KDB_ENABLE_REG_WRITE,
+ },
+ { .cmd_name = "ef",
+ .cmd_func = kdb_ef,
+ .cmd_usage = "<vaddr>",
+ .cmd_help = "Display exception frame",
+ .cmd_flags = KDB_ENABLE_MEM_READ,
+ },
+ { .cmd_name = "bt",
+ .cmd_func = kdb_bt,
+ .cmd_usage = "[<vaddr>]",
+ .cmd_help = "Stack traceback",
+ .cmd_minlen = 1,
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
+ },
+ { .cmd_name = "btp",
+ .cmd_func = kdb_bt,
+ .cmd_usage = "<pid>",
+ .cmd_help = "Display stack for process <pid>",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
+ { .cmd_name = "bta",
+ .cmd_func = kdb_bt,
+ .cmd_usage = "[D|R|S|T|C|Z|E|U|I|M|A]",
+ .cmd_help = "Backtrace all processes matching state flag",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
+ { .cmd_name = "btc",
+ .cmd_func = kdb_bt,
+ .cmd_usage = "",
+ .cmd_help = "Backtrace current process on each cpu",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
+ { .cmd_name = "btt",
+ .cmd_func = kdb_bt,
+ .cmd_usage = "<vaddr>",
+ .cmd_help = "Backtrace process given its struct task address",
+ .cmd_flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
+ },
+ { .cmd_name = "env",
+ .cmd_func = kdb_env,
+ .cmd_usage = "",
+ .cmd_help = "Show environment variables",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "set",
+ .cmd_func = kdb_set,
+ .cmd_usage = "",
+ .cmd_help = "Set environment variables",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "help",
+ .cmd_func = kdb_help,
+ .cmd_usage = "",
+ .cmd_help = "Display Help Message",
+ .cmd_minlen = 1,
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "?",
+ .cmd_func = kdb_help,
+ .cmd_usage = "",
+ .cmd_help = "Display Help Message",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "cpu",
+ .cmd_func = kdb_cpu,
+ .cmd_usage = "<cpunum>",
+ .cmd_help = "Switch to new cpu",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE_NO_ARGS,
+ },
+ { .cmd_name = "kgdb",
+ .cmd_func = kdb_kgdb,
+ .cmd_usage = "",
+ .cmd_help = "Enter kgdb mode",
+ .cmd_flags = 0,
+ },
+ { .cmd_name = "ps",
+ .cmd_func = kdb_ps,
+ .cmd_usage = "[<flags>|A]",
+ .cmd_help = "Display active task list",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
+ { .cmd_name = "pid",
+ .cmd_func = kdb_pid,
+ .cmd_usage = "<pidnum>",
+ .cmd_help = "Switch to another task",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
+ { .cmd_name = "reboot",
+ .cmd_func = kdb_reboot,
+ .cmd_usage = "",
+ .cmd_help = "Reboot the machine immediately",
+ .cmd_flags = KDB_ENABLE_REBOOT,
+ },
#if defined(CONFIG_MODULES)
- kdb_register_flags("lsmod", kdb_lsmod, "",
- "List loaded kernel modules", 0,
- KDB_ENABLE_INSPECT);
+ { .cmd_name = "lsmod",
+ .cmd_func = kdb_lsmod,
+ .cmd_usage = "",
+ .cmd_help = "List loaded kernel modules",
+ .cmd_flags = KDB_ENABLE_INSPECT,
+ },
#endif
#if defined(CONFIG_MAGIC_SYSRQ)
- kdb_register_flags("sr", kdb_sr, "<key>",
- "Magic SysRq key", 0,
- KDB_ENABLE_ALWAYS_SAFE);
+ { .cmd_name = "sr",
+ .cmd_func = kdb_sr,
+ .cmd_usage = "<key>",
+ .cmd_help = "Magic SysRq key",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
#endif
#if defined(CONFIG_PRINTK)
- kdb_register_flags("dmesg", kdb_dmesg, "[lines]",
- "Display syslog buffer", 0,
- KDB_ENABLE_ALWAYS_SAFE);
+ { .cmd_name = "dmesg",
+ .cmd_func = kdb_dmesg,
+ .cmd_usage = "[lines]",
+ .cmd_help = "Display syslog buffer",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
#endif
- if (arch_kgdb_ops.enable_nmi) {
- kdb_register_flags("disable_nmi", kdb_disable_nmi, "",
- "Disable NMI entry to KDB", 0,
- KDB_ENABLE_ALWAYS_SAFE);
- }
- kdb_register_flags("defcmd", kdb_defcmd, "name \"usage\" \"help\"",
- "Define a set of commands, down to endefcmd", 0,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("kill", kdb_kill, "<-signal> <pid>",
- "Send a signal to a process", 0,
- KDB_ENABLE_SIGNAL);
- kdb_register_flags("summary", kdb_summary, "",
- "Summarize the system", 4,
- KDB_ENABLE_ALWAYS_SAFE);
- kdb_register_flags("per_cpu", kdb_per_cpu, "<sym> [<bytes>] [<cpu>]",
- "Display per_cpu variables", 3,
- KDB_ENABLE_MEM_READ);
- kdb_register_flags("grephelp", kdb_grep_help, "",
- "Display help on | grep", 0,
- KDB_ENABLE_ALWAYS_SAFE);
+ { .cmd_name = "defcmd",
+ .cmd_func = kdb_defcmd,
+ .cmd_usage = "name \"usage\" \"help\"",
+ .cmd_help = "Define a set of commands, down to endefcmd",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "kill",
+ .cmd_func = kdb_kill,
+ .cmd_usage = "<-signal> <pid>",
+ .cmd_help = "Send a signal to a process",
+ .cmd_flags = KDB_ENABLE_SIGNAL,
+ },
+ { .cmd_name = "summary",
+ .cmd_func = kdb_summary,
+ .cmd_usage = "",
+ .cmd_help = "Summarize the system",
+ .cmd_minlen = 4,
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+ { .cmd_name = "per_cpu",
+ .cmd_func = kdb_per_cpu,
+ .cmd_usage = "<sym> [<bytes>] [<cpu>]",
+ .cmd_help = "Display per_cpu variables",
+ .cmd_minlen = 3,
+ .cmd_flags = KDB_ENABLE_MEM_READ,
+ },
+ { .cmd_name = "grephelp",
+ .cmd_func = kdb_grep_help,
+ .cmd_usage = "",
+ .cmd_help = "Display help on | grep",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+ },
+};
+
+static kdbtab_t nmicmd = {
+ .cmd_name = "disable_nmi",
+ .cmd_func = kdb_disable_nmi,
+ .cmd_usage = "",
+ .cmd_help = "Disable NMI entry to KDB",
+ .cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+};
+
+/* Initialize the kdb command table. */
+static void __init kdb_inittab(void)
+{
+ kdb_register_table(maintab, ARRAY_SIZE(maintab));
+ if (arch_kgdb_ops.enable_nmi)
+ kdb_register_table(&nmicmd, 1);
}
/* Execute any commands defined in kdb_cmds. */
projects / linux-2.6-microblaze.git / blobdiff