* to that BSS) that can change during the lifetime of the BSS.
*
* @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
- * @multi_sta_back_32bit: supports BA bitmap of 32-bits in Multi-STA BACK
* @uora_exists: is the UORA element advertised by AP
* @ack_enabled: indicates support to receive a multi-TID that solicits either
* ACK, BACK or both
return info->tx_time_est << 2;
}
+/***
+ * struct ieee80211_rate_status - mrr stage for status path
+ *
+ * This struct is used in struct ieee80211_tx_status to provide drivers a
+ * dynamic way to report about used rates and power levels per packet.
+ *
+ * @rate_idx The actual used rate.
+ * @try_count How often the rate was tried.
+ * @tx_power_idx An idx into the ieee80211_hw->tx_power_levels list of the
+ * corresponding wifi hardware. The idx shall point to the power level
+ * that was used when sending the packet.
+ */
+struct ieee80211_rate_status {
+ struct rate_info rate_idx;
+ u8 try_count;
+ u8 tx_power_idx;
+};
+
/**
* struct ieee80211_tx_status - extended tx status info for rate control
*
* @sta: Station that the packet was transmitted for
* @info: Basic tx status information
* @skb: Packet skb (can be NULL if not provided by the driver)
- * @rate: The TX rate that was used when sending the packet
+ * @rates: Mrr stages that were used when sending the packet
+ * @n_rates: Number of mrr stages (count of instances for @rates)
* @free_list: list where processed skbs are stored to be free'd by the driver
*/
struct ieee80211_tx_status {
struct ieee80211_sta *sta;
struct ieee80211_tx_info *info;
struct sk_buff *skb;
- struct rate_info *rate;
+ struct ieee80211_rate_status *rates;
+ u8 n_rates;
+
struct list_head *free_list;
};
* in the TX status but the rate control information (it does clear
* the count since you need to fill that in anyway).
*
- * NOTE: You can only use this function if you do NOT use
- * info->driver_data! Use info->rate_driver_data
- * instead if you need only the less space that allows.
+ * NOTE: While the rates array is kept intact, this will wipe all of the
+ * driver_data fields in info, so it's up to the driver to restore
+ * any fields it needs after calling this helper.
*/
static inline void
ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
* at runtime, mac80211 will never touch this field
- * @offloaad_flags: hardware offload capabilities/flags for this interface.
+ * @offload_flags: hardware offload capabilities/flags for this interface.
* These are initialized by mac80211 before calling .add_interface,
* .change_interface or .update_vif_offload and updated by the driver
* within these ops, based on supported features or runtime change
enum nl80211_tx_power_setting type;
};
+#define MAX_STA_LINKS 15
+
+/**
+ * struct ieee80211_link_sta - station Link specific info
+ * All link specific info for a STA link for a non MLD STA(single)
+ * or a MLD STA(multiple entries) are stored here.
+ *
+ * @addr: MAC address of the Link STA. For non-MLO STA this is same as the addr
+ * in ieee80211_sta. For MLO Link STA this addr can be same or different
+ * from addr in ieee80211_sta (representing MLD STA addr)
+ * @supp_rates: Bitmap of supported rates
+ * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
+ * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
+ * @he_cap: HE capabilities of this STA
+ * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities
+ * @eht_cap: EHT capabilities of this STA
+ * @bandwidth: current bandwidth the station can receive with
+ * @rx_nss: in HT/VHT, the maximum number of spatial streams the
+ * station can receive at the moment, changed by operating mode
+ * notifications and capabilities. The value is only valid after
+ * the station moves to associated state.
+ * @txpwr: the station tx power configuration
+ *
+ */
+struct ieee80211_link_sta {
+ u8 addr[ETH_ALEN];
+
+ u32 supp_rates[NUM_NL80211_BANDS];
+ struct ieee80211_sta_ht_cap ht_cap;
+ struct ieee80211_sta_vht_cap vht_cap;
+ struct ieee80211_sta_he_cap he_cap;
+ struct ieee80211_he_6ghz_capa he_6ghz_capa;
+ struct ieee80211_sta_eht_cap eht_cap;
+
+ u8 rx_nss;
+ enum ieee80211_sta_rx_bandwidth bandwidth;
+ struct ieee80211_sta_txpwr txpwr;
+};
+
/**
* struct ieee80211_sta - station table entry
*
* either be protected by rcu_read_lock() explicitly or implicitly,
* or you must take good care to not use such a pointer after a
* call to your sta_remove callback that removed it.
+ * This also represents the MLD STA in case of MLO association
+ * and holds pointers to various link STA's
*
* @addr: MAC address
* @aid: AID we assigned to the station if we're an AP
- * @supp_rates: Bitmap of supported rates (per band)
- * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
- * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
- * @he_cap: HE capabilities of this STA
- * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities
- * @eht_cap: EHT capabilities of this STA
* @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU
* that this station is allowed to transmit to us.
* Can be modified by driver.
* if wme is supported. The bits order is like in
* IEEE80211_WMM_IE_STA_QOSINFO_AC_*.
* @max_sp: max Service Period. Only valid if wme is supported.
- * @bandwidth: current bandwidth the station can receive with
- * @rx_nss: in HT/VHT, the maximum number of spatial streams the
- * station can receive at the moment, changed by operating mode
- * notifications and capabilities. The value is only valid after
- * the station moves to associated state.
* @smps_mode: current SMPS mode (off, static or dynamic)
* @rates: rate control selection table
* @tdls: indicates whether the STA is a TDLS peer
* @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
* @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
* @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
- * @txpwr: the station tx power configuration
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
* the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
+ * @multi_link_sta: Identifies if this sta is a MLD STA
+ * @deflink: This holds the default link STA information, for non MLO STA all link
+ * specific STA information is accessed through @deflink or through
+ * link[0] which points to address of @deflink. For MLO Link STA
+ * the first added link STA will point to deflink.
+ * @link: reference to Link Sta entries. For Non MLO STA, except 1st link,
+ * i.e link[0] all links would be assigned to NULL by default and
+ * would access link information via @deflink or link[0]. For MLO
+ * STA, first link STA being added will point its link pointer to
+ * @deflink address and remaining would be allocated and the address
+ * would be assigned to link[link_id] where link_id is the id assigned
+ * by the AP.
*/
struct ieee80211_sta {
- u32 supp_rates[NUM_NL80211_BANDS];
u8 addr[ETH_ALEN];
u16 aid;
- struct ieee80211_sta_ht_cap ht_cap;
- struct ieee80211_sta_vht_cap vht_cap;
- struct ieee80211_sta_he_cap he_cap;
- struct ieee80211_he_6ghz_capa he_6ghz_capa;
- struct ieee80211_sta_eht_cap eht_cap;
u16 max_rx_aggregation_subframes;
bool wme;
u8 uapsd_queues;
u8 max_sp;
- u8 rx_nss;
- enum ieee80211_sta_rx_bandwidth bandwidth;
enum ieee80211_smps_mode smps_mode;
struct ieee80211_sta_rates __rcu *rates;
bool tdls;
bool support_p2p_ps;
u16 max_rc_amsdu_len;
u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS];
- struct ieee80211_sta_txpwr txpwr;
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
+ bool multi_link_sta;
+ struct ieee80211_link_sta deflink;
+ struct ieee80211_link_sta *link[MAX_STA_LINKS];
+
/* must be last */
u8 drv_priv[] __aligned(sizeof(void *));
};
* usage and 802.11 frames with %RX_FLAG_ONLY_MONITOR set for monitor to
* the stack.
*
+ * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color
+ * collision detection and doesn't need it in software.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD,
IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD,
IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP,
+ IEEE80211_HW_DETECTS_COLOR_COLLISION,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
* refilling deficit of each TXQ.
*
* @max_mtu: the max mtu could be set.
+ *
+ * @tx_power_levels: a list of power levels supported by the wifi hardware.
+ * The power levels can be specified either as integer or fractions.
+ * The power level at idx 0 shall be the maximum positive power level.
+ *
+ * @max_txpwr_levels_idx: the maximum valid idx of 'tx_power_levels' list.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
u8 tx_sk_pacing_shift;
u8 weight_multiplier;
u32 max_mtu;
+ const s8 *tx_power_levels;
+ u8 max_txpwr_levels_idx;
};
static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
enum nl80211_band band,
int index)
{
- return (sta == NULL || sta->supp_rates[band] & BIT(index));
+ return (sta == NULL || sta->deflink.supp_rates[band] & BIT(index));
}
static inline s8
projects / linux-2.6-microblaze.git / blobdiff