IDE_TFLAG_WRITE = (1 << 12),
IDE_TFLAG_CUSTOM_HANDLER = (1 << 13),
IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14),
- IDE_TFLAG_IN_HOB_FEATURE = (1 << 15),
+ IDE_TFLAG_IN_HOB_ERROR = (1 << 15),
IDE_TFLAG_IN_HOB_NSECT = (1 << 16),
IDE_TFLAG_IN_HOB_LBAL = (1 << 17),
IDE_TFLAG_IN_HOB_LBAM = (1 << 18),
IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
IDE_TFLAG_IN_HOB_LBAM |
IDE_TFLAG_IN_HOB_LBAH,
- IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
+ IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR |
IDE_TFLAG_IN_HOB_NSECT |
IDE_TFLAG_IN_HOB_LBA,
- IDE_TFLAG_IN_FEATURE = (1 << 20),
+ IDE_TFLAG_IN_ERROR = (1 << 20),
IDE_TFLAG_IN_NSECT = (1 << 21),
IDE_TFLAG_IN_LBAL = (1 << 22),
IDE_TFLAG_IN_LBAM = (1 << 23),
struct ide_taskfile {
u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
+ /* 1-5: additional data to support LBA48 */
+ union {
+ u8 hob_error; /* read: error */
+ u8 hob_feature; /* write: feature */
+ };
- u8 hob_feature; /* 1-5: additional data to support LBA48 */
u8 hob_nsect;
u8 hob_lbal;
u8 hob_lbam;
unsigned int nbytes;
unsigned int nleft;
+ unsigned int last_xfer_len;
+
struct scatterlist *cursg;
unsigned int cursg_ofs;
* With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
* This is used for several packet commands (not for READ/WRITE commands).
*/
-#define IDE_PC_BUFFER_SIZE 256
+#define IDE_PC_BUFFER_SIZE 64
#define ATAPI_WAIT_PC (60 * HZ)
struct ide_atapi_pc {
struct idetape_bh *bh;
char *b_data;
- struct scatterlist *sg;
- unsigned int sg_cnt;
-
unsigned long timeout;
};
IDE_AFLAG_TOCADDR_AS_BCD = (1 << 3),
/* TOC track numbers are in BCD. */
IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 4),
- /*
- * Drive does not provide data in multiples of SECTOR_SIZE
- * when more than one interrupt is needed.
- */
- IDE_AFLAG_LIMIT_NFRAMES = (1 << 5),
/* Saved TOC information is current. */
IDE_AFLAG_TOC_VALID = (1 << 6),
/* We think that the drive door is locked. */
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
- unsigned int drive_data; /* used by set_pio_mode/selectproc */
+ unsigned int drive_data; /* used by set_pio_mode/dev_select() */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
void (*exec_command)(struct hwif_s *, u8);
u8 (*read_status)(struct hwif_s *);
u8 (*read_altstatus)(struct hwif_s *);
+ void (*write_devctl)(struct hwif_s *, u8);
- void (*set_irq)(struct hwif_s *, int);
-
+ void (*dev_select)(ide_drive_t *);
void (*tf_load)(ide_drive_t *, struct ide_cmd *);
void (*tf_read)(ide_drive_t *, struct ide_cmd *);
* @init_dev: host specific initialization of a device
* @set_pio_mode: routine to program host for PIO mode
* @set_dma_mode: routine to program host for DMA mode
- * @selectproc: tweaks hardware to select drive
* @reset_poll: chipset polling based on hba specifics
* @pre_reset: chipset specific changes to default for device-hba resets
* @resetproc: routine to reset controller after a disk reset
void (*init_dev)(ide_drive_t *);
void (*set_pio_mode)(ide_drive_t *, const u8);
void (*set_dma_mode)(ide_drive_t *, const u8);
- void (*selectproc)(ide_drive_t *);
int (*reset_poll)(ide_drive_t *);
void (*pre_reset)(ide_drive_t *);
void (*resetproc)(ide_drive_t *);
int (*dma_end)(struct ide_drive_s *);
int (*dma_test_irq)(struct ide_drive_s *);
void (*dma_lost_irq)(struct ide_drive_s *);
+ /* below ones are optional */
+ int (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
int (*dma_timer_expiry)(struct ide_drive_s *);
- void (*dma_timeout)(struct ide_drive_s *);
+ void (*dma_clear)(struct ide_drive_s *);
/*
* The following method is optional and only required to be
* implemented for the SFF-8038i compatible controllers.
void ide_exec_command(ide_hwif_t *, u8);
u8 ide_read_status(ide_hwif_t *);
u8 ide_read_altstatus(ide_hwif_t *);
+void ide_write_devctl(ide_hwif_t *, u8);
-void ide_set_irq(ide_hwif_t *, int);
-
+void ide_dev_select(ide_drive_t *);
void ide_tf_load(ide_drive_t *, struct ide_cmd *);
void ide_tf_read(ide_drive_t *, struct ide_cmd *);
void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
-int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
-
-extern void SELECT_DRIVE(ide_drive_t *);
void SELECT_MASK(ide_drive_t *, int);
u8 ide_read_error(ide_drive_t *);
ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
+void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
+
void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
int ide_allocate_dma_engine(ide_hwif_t *);
void ide_release_dma_engine(ide_hwif_t *);
-int ide_build_sglist(ide_drive_t *, struct ide_cmd *);
-void ide_destroy_dmatable(ide_drive_t *);
+int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
+void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
int config_drive_for_dma(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
void ide_dma_lost_irq(ide_drive_t *);
-void ide_dma_timeout(ide_drive_t *);
ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
#else
static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
-static inline int ide_build_sglist(ide_drive_t *drive,
- struct ide_cmd *cmd) { return 0; }
+static inline int ide_dma_prepare(ide_drive_t *drive,
+ struct ide_cmd *cmd) { return 1; }
+static inline void ide_dma_unmap_sg(ide_drive_t *drive,
+ struct ide_cmd *cmd) { ; }
#endif /* CONFIG_BLK_DEV_IDEDMA */
#ifdef CONFIG_BLK_DEV_IDEACPI
projects / linux-2.6-microblaze.git / blobdiff