#include <linux/list.h>
#include <linux/ctype.h>
+#include <linux/hdmi.h>
#include <drm/drm_mode_object.h>
#include <uapi/drm/drm_mode.h>
struct drm_device;
struct drm_connector_helper_funcs;
+struct drm_modeset_acquire_ctx;
struct drm_device;
struct drm_crtc;
struct drm_encoder;
SubPixelVerticalRGB,
SubPixelVerticalBGR,
SubPixelNone,
+
+};
+
+/**
+ * struct drm_scrambling: sink's scrambling support.
+ */
+struct drm_scrambling {
+ /**
+ * @supported: scrambling supported for rates > 340 Mhz.
+ */
+ bool supported;
+ /**
+ * @low_rates: scrambling supported for rates <= 340 Mhz.
+ */
+ bool low_rates;
+};
+
+/*
+ * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
+ *
+ * Provides SCDC register support and capabilities related information on a
+ * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0.
+ */
+struct drm_scdc {
+ /**
+ * @supported: status control & data channel present.
+ */
+ bool supported;
+ /**
+ * @read_request: sink is capable of generating scdc read request.
+ */
+ bool read_request;
+ /**
+ * @scrambling: sink's scrambling capabilities
+ */
+ struct drm_scrambling scrambling;
+};
+
+
+/**
+ * struct drm_hdmi_info - runtime information about the connected HDMI sink
+ *
+ * Describes if a given display supports advanced HDMI 2.0 features.
+ * This information is available in CEA-861-F extension blocks (like HF-VSDB).
+ */
+struct drm_hdmi_info {
+ /** @scdc: sink's scdc support and capabilities */
+ struct drm_scdc scdc;
+};
+
+/**
+ * enum drm_link_status - connector's link_status property value
+ *
+ * This enum is used as the connector's link status property value.
+ * It is set to the values defined in uapi.
+ *
+ * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful
+ * link training
+ * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training
+ * failure
+ */
+enum drm_link_status {
+ DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD,
+ DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
};
/**
#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+/* data is transmitted MSB to LSB on the bus */
+#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4)
+/* data is transmitted LSB to MSB on the bus */
+#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5)
/**
* @bus_flags: Additional information (like pixel signal polarity) for
* @cea_rev: CEA revision of the HDMI sink.
*/
u8 cea_rev;
+
+ /**
+ * @hdmi: advance features of a HDMI sink.
+ */
+ struct drm_hdmi_info hdmi;
};
int drm_display_info_set_bus_formats(struct drm_display_info *info,
struct drm_encoder *best_encoder;
+ /**
+ * @link_status: Connector link_status to keep track of whether link is
+ * GOOD or BAD to notify userspace if retraining is necessary.
+ */
+ enum drm_link_status link_status;
+
struct drm_atomic_state *state;
struct drm_tv_connector_state tv;
+
+ /**
+ * @picture_aspect_ratio: Connector property to control the
+ * HDMI infoframe aspect ratio setting.
+ *
+ * The %DRM_MODE_PICTURE_ASPECT_\* values much match the
+ * values for &enum hdmi_picture_aspect
+ */
+ enum hdmi_picture_aspect picture_aspect_ratio;
+
+ /**
+ * @scaling_mode: Connector property to control the
+ * upscaling, mostly used for built-in panels.
+ */
+ unsigned int scaling_mode;
};
/**
* the helper library vtable purely for historical reasons. The only DRM
* core entry point to probe connector state is @fill_modes.
*
+ * Note that the helper library will already hold
+ * &drm_mode_config.connection_mutex. Drivers which need to grab additional
+ * locks to avoid races with concurrent modeset changes need to use
+ * &drm_connector_helper_funcs.detect_ctx instead.
+ *
* RETURNS:
*
* drm_connector_status indicating the connector's status.
* @bad_edid_counter: track sinks that give us an EDID with invalid checksum
* @edid_corrupt: indicates whether the last read EDID was corrupt
* @debugfs_entry: debugfs directory for this connector
- * @state: current atomic state for this connector
* @has_tile: is this connector connected to a tiled monitor
* @tile_group: tile group for the connected monitor
* @tile_is_single_monitor: whether the tile is one monitor housing
* @tile_v_loc: vertical location of this tile
* @tile_h_size: horizontal size of this tile.
* @tile_v_size: vertical size of this tile.
+ * @scaling_mode_property: Optional atomic property to control the upscaling.
*
* Each connector may be connected to one or more CRTCs, or may be clonable by
* another connector if they can share a CRTC. Each connector also has a specific
struct drm_property_blob *edid_blob_ptr;
struct drm_object_properties properties;
+ struct drm_property *scaling_mode_property;
+
/**
* @path_blob_ptr:
*
struct dentry *debugfs_entry;
+ /**
+ * @state:
+ *
+ * Current atomic state for this connector.
+ *
+ * This is protected by @drm_mode_config.connection_mutex. Note that
+ * nonblocking atomic commits access the current connector state without
+ * taking locks. Either by going through the &struct drm_atomic_state
+ * pointers, see for_each_connector_in_state(),
+ * for_each_oldnew_connector_in_state(),
+ * for_each_old_connector_in_state() and
+ * for_each_new_connector_in_state(). Or through careful ordering of
+ * atomic commit operations as implemented in the atomic helpers, see
+ * &struct drm_crtc_commit.
+ */
struct drm_connector_state *state;
/* DisplayID bits */
}
/**
- * drm_connector_reference - incr the connector refcnt
- * @connector: connector
+ * drm_connector_get - acquire a connector reference
+ * @connector: DRM connector
*
* This function increments the connector's refcount.
*/
+static inline void drm_connector_get(struct drm_connector *connector)
+{
+ drm_mode_object_get(&connector->base);
+}
+
+/**
+ * drm_connector_put - release a connector reference
+ * @connector: DRM connector
+ *
+ * This function decrements the connector's reference count and frees the
+ * object if the reference count drops to zero.
+ */
+static inline void drm_connector_put(struct drm_connector *connector)
+{
+ drm_mode_object_put(&connector->base);
+}
+
+/**
+ * drm_connector_reference - acquire a connector reference
+ * @connector: DRM connector
+ *
+ * This is a compatibility alias for drm_connector_get() and should not be
+ * used by new code.
+ */
static inline void drm_connector_reference(struct drm_connector *connector)
{
- drm_mode_object_reference(&connector->base);
+ drm_connector_get(connector);
}
/**
- * drm_connector_unreference - unref a connector
- * @connector: connector to unref
+ * drm_connector_unreference - release a connector reference
+ * @connector: DRM connector
*
- * This function decrements the connector's refcount and frees it if it drops to zero.
+ * This is a compatibility alias for drm_connector_put() and should not be
+ * used by new code.
*/
static inline void drm_connector_unreference(struct drm_connector *connector)
{
- drm_mode_object_unreference(&connector->base);
+ drm_connector_put(connector);
}
const char *drm_get_connector_status_name(enum drm_connector_status status);
unsigned int num_modes,
const char * const modes[]);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
+ u32 scaling_mode_mask);
int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
int drm_mode_connector_set_tile_property(struct drm_connector *connector);
int drm_mode_connector_update_edid_property(struct drm_connector *connector,
const struct edid *edid);
+void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
+ uint64_t link_status);
/**
* struct drm_tile_group - Tile group metadata
*
* This iterator tracks state needed to be able to walk the connector_list
* within struct drm_mode_config. Only use together with
- * drm_connector_list_iter_get(), drm_connector_list_iter_put() and
+ * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and
* drm_connector_list_iter_next() respectively the convenience macro
* drm_for_each_connector_iter().
*/
struct drm_connector *conn;
};
-void drm_connector_list_iter_get(struct drm_device *dev,
- struct drm_connector_list_iter *iter);
+void drm_connector_list_iter_begin(struct drm_device *dev,
+ struct drm_connector_list_iter *iter);
struct drm_connector *
drm_connector_list_iter_next(struct drm_connector_list_iter *iter);
-void drm_connector_list_iter_put(struct drm_connector_list_iter *iter);
+void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);
/**
* drm_for_each_connector_iter - connector_list iterator macro
* @iter: &struct drm_connector_list_iter
*
* Note that @connector is only valid within the list body, if you want to use
- * @connector after calling drm_connector_list_iter_put() then you need to grab
- * your own reference first using drm_connector_reference().
+ * @connector after calling drm_connector_list_iter_end() then you need to grab
+ * your own reference first using drm_connector_get().
*/
#define drm_for_each_connector_iter(connector, iter) \
while ((connector = drm_connector_list_iter_next(iter)))