treewide: replace '---help---' in Kconfig files with 'help'

[linux-2.6-microblaze.git] / drivers / tty / serial / Kconfig

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0282ad9..780908d 100644 (file)
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -32,7 +32,7 @@ config SERIAL_AMBA_PL010_CONSOLE
        bool "Support for console on AMBA serial port"
        depends on SERIAL_AMBA_PL010=y
        select SERIAL_CORE_CONSOLE
-       ---help---
+       help
          Say Y here if you wish to use an AMBA PrimeCell UART as the system
          console (the system console is the device which receives all kernel
          messages and warnings and which allows logins in single user mode).
@@ -60,7 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE
        depends on SERIAL_AMBA_PL011=y
        select SERIAL_CORE_CONSOLE
        select SERIAL_EARLYCON
-       ---help---
+       help
          Say Y here if you wish to use an AMBA PrimeCell UART as the system
          console (the system console is the device which receives all kernel
          messages and warnings and which allows logins in single user mode).
@@ -101,7 +101,7 @@ config SERIAL_SB1250_DUART
        depends on SIBYTE_SB1xxx_SOC=y
        select SERIAL_CORE
        default y
-       ---help---
+       help
          Support for the asynchronous serial interface (DUART) included in
          the BCM1250 and derived System-On-a-Chip (SOC) devices.  Note that
          the letter D in DUART stands for "dual", which is how the device
@@ -116,7 +116,7 @@ config SERIAL_SB1250_DUART_CONSOLE
        depends on SERIAL_SB1250_DUART=y
        select SERIAL_CORE_CONSOLE
        default y
-       ---help---
+       help
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
          kernel messages and warnings and which allows logins in single user
@@ -322,7 +322,7 @@ config SERIAL_TEGRA_TCU_CONSOLE
        depends on SERIAL_TEGRA_TCU=y
        select SERIAL_CORE_CONSOLE
        default y
-       ---help---
+       help
          If you say Y here, it will be possible to use a the Tegra TCU as the
          system console (the system console is the device which receives all
          kernel messages and warnings and which allows logins in single user
@@ -355,7 +355,7 @@ config SERIAL_DZ
        depends on MACH_DECSTATION && 32BIT
        select SERIAL_CORE
        default y
-       ---help---
+       help
          DZ11-family serial controllers for DECstations and VAXstations,
          including the DC7085, M7814, and M7819.
 
@@ -364,7 +364,7 @@ config SERIAL_DZ_CONSOLE
        depends on SERIAL_DZ=y
        select SERIAL_CORE_CONSOLE
        default y
-       ---help---
+       help
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
          kernel messages and warnings and which allows logins in single user
@@ -380,7 +380,7 @@ config SERIAL_ZS
        depends on MACH_DECSTATION
        select SERIAL_CORE
        default y
-       ---help---
+       help
          Support for the Zilog 85C350 serial communications controller used
          for serial ports in newer DECstation systems.  These include the
          DECsystem 5900 and all models of the DECstation and DECsystem 5000
@@ -394,7 +394,7 @@ config SERIAL_ZS_CONSOLE
        depends on SERIAL_ZS=y
        select SERIAL_CORE_CONSOLE
        default y
-       ---help---
+       help
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
          kernel messages and warnings and which allows logins in single user
@@ -588,7 +588,7 @@ config SERIAL_MUX
        depends on GSC
        select SERIAL_CORE
        default y
-       ---help---
+       help
          Saying Y here will enable the hardware MUX serial driver for
          the Nova, K class systems and D class with a 'remote control card'.
          The hardware MUX is not 8250/16550 compatible therefore the
@@ -1116,7 +1116,7 @@ config SERIAL_TIMBERDALE
        tristate "Support for timberdale UART"
        select SERIAL_CORE
        depends on X86_32 || COMPILE_TEST
-       ---help---
+       help
        Add support for UART controller on timberdale.
 
 config SERIAL_BCM63XX
@@ -1145,7 +1145,7 @@ config SERIAL_GRLIB_GAISLER_APBUART
        tristate "GRLIB APBUART serial support"
        depends on OF && SPARC
        select SERIAL_CORE
-       ---help---
+       help
        Add support for the GRLIB APBUART serial port.
 
 config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE