Merge existing fixes from spi/for-5.16 into new branch

[linux-2.6-microblaze.git] / drivers / spi / spi-cadence-quadspi.c

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 8b3d268..b808c94 100644 (file)
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -37,6 +37,7 @@
 #define CQSPI_NEEDS_WR_DELAY           BIT(0)
 #define CQSPI_DISABLE_DAC_MODE         BIT(1)
 #define CQSPI_SUPPORT_EXTERNAL_DMA     BIT(2)
+#define CQSPI_NO_SUPPORT_WR_COMPLETION BIT(3)
 
 /* Capabilities */
 #define CQSPI_SUPPORTS_OCTAL           BIT(0)
@@ -86,6 +87,7 @@ struct cqspi_st {
        struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
        bool                    use_dma_read;
        u32                     pd_dev_id;
+       bool                    wr_completion;
 };
 
 struct cqspi_driver_platdata {
@@ -996,9 +998,11 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata,
         * polling on the controller's side. spinand and spi-nor will take
         * care of polling the status register.
         */
-       reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
-       reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
-       writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+       if (cqspi->wr_completion) {
+               reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+               reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
+               writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+       }
 
        reg = readl(reg_base + CQSPI_REG_SIZE);
        reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
@@ -1736,6 +1740,10 @@ static int cqspi_probe(struct platform_device *pdev)
 
        cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
        master->max_speed_hz = cqspi->master_ref_clk_hz;
+
+       /* write completion is supported by default */
+       cqspi->wr_completion = true;
+
        ddata  = of_device_get_match_data(dev);
        if (ddata) {
                if (ddata->quirks & CQSPI_NEEDS_WR_DELAY)
@@ -1747,6 +1755,8 @@ static int cqspi_probe(struct platform_device *pdev)
                        cqspi->use_direct_mode = true;
                if (ddata->quirks & CQSPI_SUPPORT_EXTERNAL_DMA)
                        cqspi->use_dma_read = true;
+               if (ddata->quirks & CQSPI_NO_SUPPORT_WR_COMPLETION)
+                       cqspi->wr_completion = false;
 
                if (of_device_is_compatible(pdev->dev.of_node,
                                            "xlnx,versal-ospi-1.0"))
@@ -1859,6 +1869,10 @@ static const struct cqspi_driver_platdata intel_lgm_qspi = {
        .quirks = CQSPI_DISABLE_DAC_MODE,
 };
 
+static const struct cqspi_driver_platdata socfpga_qspi = {
+       .quirks = CQSPI_NO_SUPPORT_WR_COMPLETION,
+};
+
 static const struct cqspi_driver_platdata versal_ospi = {
        .hwcaps_mask = CQSPI_SUPPORTS_OCTAL,
        .quirks = CQSPI_DISABLE_DAC_MODE | CQSPI_SUPPORT_EXTERNAL_DMA,
@@ -1887,6 +1901,10 @@ static const struct of_device_id cqspi_dt_ids[] = {
                .compatible = "xlnx,versal-ospi-1.0",
                .data = (void *)&versal_ospi,
        },
+       {
+               .compatible = "intel,socfpga-qspi",
+               .data = (void *)&socfpga_qspi,
+       },
        { /* end of table */ }
 };