#define xerr_status phys.xerr_st
#define nego_status phys.nego_st
-#if 0
-#define sync_status phys.sync_st
-#define wide_status phys.wide_st
-#endif
-
/*==========================================================
**
** Declaration of structs: Data structure block
#define RELOC_SOFTC 0x40000000
#define RELOC_LABEL 0x50000000
#define RELOC_REGISTER 0x60000000
-#if 0
-#define RELOC_KVAR 0x70000000
-#endif
#define RELOC_LABELH 0x80000000
#define RELOC_MASK 0xf0000000
#define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label))
#define RADDR(label) (RELOC_REGISTER | REG(label))
#define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs)))
-#if 0
-#define KVAR(which) (RELOC_KVAR | (which))
-#endif
-#if 0
-#define SCRIPT_KVAR_JIFFIES (0)
-#define SCRIPT_KVAR_FIRST SCRIPT_KVAR_JIFFIES
-#define SCRIPT_KVAR_LAST SCRIPT_KVAR_JIFFIES
-/*
- * Kernel variables referenced in the scripts.
- * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY.
- */
-static void *script_kvars[] __initdata =
- { (void *)&jiffies };
-#endif
static struct script script0 __initdata = {
/*--------------------------< START >-----------------------*/ {
SCR_COPY (1),
RADDR (scratcha),
NADDR (msgout),
-#if 0
- SCR_COPY (1),
- RADDR (scratcha),
- NADDR (msgin),
-#endif
/*
** Anticipate the COMMAND phase.
** This is the normal case for initial selection.
cp->parity_status = 0;
cp->xerr_status = XE_OK;
-#if 0
- cp->sync_status = tp->sval;
- cp->wide_status = tp->wval;
-#endif
/*----------------------------------------------------
**
return SUCCESS;
}
-#if 0 /* unused and broken.. */
-/*==========================================================
-**
-**
-** Abort an SCSI command.
-** This is called from the generic SCSI driver.
-**
-**
-**==========================================================
-*/
-static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd)
-{
-/* struct scsi_device *device = cmd->device; */
- struct ccb *cp;
- int found;
- int retv;
-
-/*
- * First, look for the scsi command in the waiting list
- */
- if (remove_from_waiting_list(np, cmd)) {
- set_host_byte(cmd, DID_ABORT);
- ncr_queue_done_cmd(np, cmd);
- return SCSI_ABORT_SUCCESS;
- }
-
-/*
- * Then, look in the wakeup list
- */
- for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) {
- /*
- ** look for the ccb of this command.
- */
- if (cp->host_status == HS_IDLE) continue;
- if (cp->cmd == cmd) {
- found = 1;
- break;
- }
- }
-
- if (!found) {
- return SCSI_ABORT_NOT_RUNNING;
- }
-
- if (np->settle_time) {
- return SCSI_ABORT_SNOOZE;
- }
-
- /*
- ** If the CCB is active, patch schedule jumps for the
- ** script to abort the command.
- */
-
- switch(cp->host_status) {
- case HS_BUSY:
- case HS_NEGOTIATE:
- printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp);
- cp->start.schedule.l_paddr =
- cpu_to_scr(NCB_SCRIPTH_PHYS (np, cancel));
- retv = SCSI_ABORT_PENDING;
- break;
- case HS_DISCONNECT:
- cp->restart.schedule.l_paddr =
- cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort));
- retv = SCSI_ABORT_PENDING;
- break;
- default:
- retv = SCSI_ABORT_NOT_RUNNING;
- break;
-
- }
-
- /*
- ** If there are no requests, the script
- ** processor will sleep on SEL_WAIT_RESEL.
- ** Let's wake it up, since it may have to work.
- */
- OUTB (nc_istat, SIGP);
-
- return retv;
-}
-#endif
-
static void ncr_detach(struct ncb *np)
{
struct ccb *cp;
*/
fak = (kpc - 1) / div_10M[div] + 1;
-#if 0 /* This optimization does not seem very useful */
-
- per = (fak * div_10M[div]) / clk;
-
- /*
- ** Why not to try the immediate lower divisor and to choose
- ** the one that allows the fastest output speed ?
- ** We don't want input speed too much greater than output speed.
- */
- if (div >= 1 && fak < 8) {
- u_long fak2, per2;
- fak2 = (kpc - 1) / div_10M[div-1] + 1;
- per2 = (fak2 * div_10M[div-1]) / clk;
- if (per2 < per && fak2 <= 8) {
- fak = fak2;
- per = per2;
- --div;
- }
- }
-#endif
-
if (fak < 4) fak = 4; /* Should never happen, too bad ... */
/*
for (cp = np->ccb; cp; cp = cp->link_ccb) {
if (!cp->cmd) continue;
if (scmd_id(cp->cmd) != target) continue;
-#if 0
- cp->sync_status = tp->sval;
- cp->wide_status = tp->wval;
-#endif
cp->phys.select.sel_scntl3 = tp->wval;
cp->phys.select.sel_sxfer = tp->sval;
}
return sts;
}
-#if 0 /* unused and broken */
-static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
-{
- struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
- int sts;
- unsigned long flags;
- struct scsi_cmnd *done_list;
-
- printk("ncr53c8xx_abort\n");
-
- NCR_LOCK_NCB(np, flags);
-
- sts = ncr_abort_command(np, cmd);
-out:
- done_list = np->done_list;
- np->done_list = NULL;
- NCR_UNLOCK_NCB(np, flags);
-
- ncr_flush_done_cmds(done_list);
-
- return sts;
-}
-#endif
-
/*
** Scsi command waiting list management.
projects / linux-2.6-microblaze.git / blobdiff