/*
* lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
- * This value can be set to values between 64 and 4096. The default value is
- * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
- * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
+ * This value can be set to values between 64 and 4096. The default value
+ * is 64, but may be increased to allow for larger Max I/O sizes. The scsi
+ * and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE).
* Because of the additional overhead involved in setting up T10-DIF,
* this parameter will be limited to 128 if BlockGuard is enabled under SLI4
* and will be limited to 512 if BlockGuard is enabled under SLI3.
*/
-LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_MIN_SG_SEG_CNT,
- LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count");
+static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
+module_param(lpfc_sg_seg_cnt, uint, 0444);
+MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count");
+
+/**
+ * lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes
+ * configured for the adapter
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains a string with the list sizes
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int len;
+
+ len = snprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n",
+ phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);
+
+ len += snprintf(buf + len, PAGE_SIZE, "Cfg: %d SCSI: %d NVME: %d\n",
+ phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,
+ phba->cfg_nvme_seg_cnt);
+ return len;
+}
+
+static DEVICE_ATTR_RO(lpfc_sg_seg_cnt);
+
+/**
+ * lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value
+ * @phba: lpfc_hba pointer.
+ * @val: contains the initial value
+ *
+ * Description:
+ * Validates the initial value is within range and assigns it to the
+ * adapter. If not in range, an error message is posted and the
+ * default value is assigned.
+ *
+ * Returns:
+ * zero if value is in range and is set
+ * -EINVAL if value was out of range
+ **/
+static int
+lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val)
+{
+ if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) {
+ phba->cfg_sg_seg_cnt = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0409 "LPFC_DRIVER_NAME"_sg_seg_cnt attribute cannot "
+ "be set to %d, allowed range is [%d, %d]\n",
+ val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT);
+ phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
+ return -EINVAL;
+}
/*
* lpfc_enable_mds_diags: Enable MDS Diagnostics
*/
LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
+/*
+ * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size
+ * 0 = Disable firmware logging (default)
+ * [1-4] = Multiple of 1/4th Mb of host memory for FW logging
+ * Value range [0..4]. Default value is 0
+ */
+LPFC_ATTR_RW(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");
+
+/*
+ * lpfc_ras_fwlog_level: Firmware logging verbosity level
+ * Valid only if firmware logging is enabled
+ * 0(Least Verbosity) 4 (most verbosity)
+ * Value range is [0..4]. Default value is 0
+ */
+LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level");
+
+/*
+ * lpfc_ras_fwlog_func: Firmware logging enabled on function number
+ * Default function which has RAS support : 0
+ * Value Range is [0..7].
+ * FW logging is a global action and enablement is via a specific
+ * port.
+ */
+LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 7, "Firmware Logging Enabled on Function");
+
/*
* lpfc_enable_bbcr: Enable BB Credit Recovery
* 0 = BB Credit Recovery disabled
&dev_attr_protocol,
&dev_attr_lpfc_xlane_supported,
&dev_attr_lpfc_enable_mds_diags,
+ &dev_attr_lpfc_ras_fwlog_buffsize,
+ &dev_attr_lpfc_ras_fwlog_level,
+ &dev_attr_lpfc_ras_fwlog_func,
&dev_attr_lpfc_enable_bbcr,
&dev_attr_lpfc_enable_dpp,
NULL,
lpfc_sli_mode_init(phba, lpfc_sli_mode);
phba->cfg_enable_dss = 1;
lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags);
+ lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize);
+ lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level);
+ lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func);
+
+
+ /* If the NVME FC4 type is enabled, scale the sg_seg_cnt to
+ * accommodate 512K and 1M IOs in a single nvme buf and supply
+ * enough NVME LS iocb buffers for larger connectivity counts.
+ */
+ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+ phba->cfg_sg_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
+ phba->cfg_iocb_cnt = 5;
+ }
+
return;
}
projects / linux-2.6-microblaze.git / blobdiff